Types of Wood Burners Near Me

Wood burning stoves provide a cost-effective alternative to expensive electric and fossil fuel heating. They also decrease dependence on imported wood, which is a major source of carbon.

Research has shown that the smoke from wood burning in homes can contribute to the winter air pollution in communities where it is prevalent. This is particularly the case in valleys susceptible to temperature shifts.

1. Pine

It is typical to make use of pine wood for log burners. However, it should be dried out prior to use indoors. Unseasoned pine wood is more likely to create creosote which can lead to chimney blockages. Unseasoned pine wood may also produce a lot of smoke and carbon dioxide, which is toxic to animals and humans alike.

Many people do not use pine wood for firewood due to of its high resin content. They also fear that creosote could build up. Creosote, a tar-like substance, covers the chimney flue, preventing smoke from leaving your home. If it gets too thick, it can lead to an explosion in your chimney, which is very dangerous. Hardwoods such as maple, oak, hickory and ash do not generate much creosote when burned and produce less smoke.

The reason pine wood produces lots of creosote when it is burned is because it was not seasoned properly. All wood must be seasoned prior to burning it indoors. Seasoning the wood removes the moisture content, making it easier to ignite and burn. If pine wood is properly seasoned it will burn more quickly with minimal sparks or spitting and will produce an excellent heat output. It will still release a large amount of creosote once it has been burned. The majority of people prefer hardwoods such as oak or hickory over pine wood for burning.

2. Cedar

Cedar is a soft wood and while it produces some decent heat, it doesn't produce as much as other kinds of hardwood firewood. It burns fast and can cause creosote build-up in the chimney. Many people are hesitant to use cedar for their fireplaces because of this.

People who don't have concerns about creosote and other issues can make use of cedar for outdoor wood-burning fireplaces. Cedar isn't the best choice for indoor fireplaces because of the oils that are released during combustion. If you're looking to use cedar indoors, it is possible to pair it with denser firewood such as hickory or oak.

The price of firewood varies by region, but a complete cord can cost between $150 and $500. This amount of wood can last for 6 to 12 weeks If you burn it two times every day.

If you don't want to buy a full cord you can cut your own firewood for less cost. Some tree services offer this service, but if you have the equipment to cut your own firewood, you can save even more money.

Green or unseasoned wood usually costs less than seasoned wood. If you plan to purchase firewood, consider buying it in the spring if possible. This will give the wood a year to season, which helps it burn better and with less smoke. It also makes the process more efficient and reduces delivery fees. If you want to go a step further, consider hiring a professional to split and stack your firewood.

3. Birch

Birch wood burners in my area are a good option to those seeking a fireplace log set that is both visually appealing and environmentally friendly. These beautiful logs, constructed of birchwood, feature realistic embers which give the appearance of a genuine fireplace fire.

wood burning stoves near me Fireplaces And Stove are ideal for outdoor fire pits. They don't produce much sparks or smoke and are extremely easy to light. This makes them an excellent option for those with a limited amount of space in their backyard or patio space.

The thin Birch is a versatile hardwood with a waterproof bark. It is used in many applications, including paper making and homeopathy, canoe construction and more. The wood is highly sought-after by artists, musicians and craftsmen due to its unique grain and texture.

Silver birch is a wonderful hardwood for firewood. However, it does not have the same density of other woods like oak or hornbeam. A cord of silver birch will not heat as fast. Birch is a popular type of woodland timber that is harvested during thinning of the forest.

Birch wood has an extremely low resin content, which means it will not spark or spit. It can also be burned green. However, it has to be properly seasoned. It's a great alternative to basswood that has a higher water content and must be dried before burning.

4. Maple

Maple is a great choice for wood burners as it lights quickly and burns hot. It also seasons well. However, it won't last as long as other hardwoods such as oak and hickory.

This wood is available in both hard and soft varieties and is available in a variety sizes and shapes including live edge. It has a natural hue that blends with both traditional and modern decor. The wood is available as a kit that includes all the required components and accessories needed to get started. The kit includes a wand/pen and solid brass tips (round and flat) and a shader tip. Shader tips are used to create realism through shading. This technique is employed by many artists to create commissioned art of their family members or pets.

In general, hardwoods such as maple and hickory last longer than softwoods like pine and fir. This is because they tend to have less pitch than softwoods, which results in longer burning fires with a minimal build-up of creosote in the chimney.

Maple is a popular firewood that is found throughout the United States. It is a heavy hardwood that has a high btu for pound and is easy to split. It is a great alternative to ash firewood, that has been affected by the emerald ash borer, and may be in short supply. It can last for a long time if properly well-seasoned.

5. Cherry

The logs of firewood made from cherry are extremely dense and produce a consistent burn. They're a great option for those who want an atmosphere that lasts. This wood has a pleasant smell and does not produce much smoke. It can spark more than other hardwoods however it is easy to manage this by using a fireplace screen.

Pine Pine is easily available and inexpensive however, it doesn't season as well as hard hardwoods and can be difficult to start. It is a great option to use for kindling and getting a fire started, but you should switch to hardwoods after the flames have established.

Alder Alder is easy to split and reasonably priced. It is very slow burning with a good heat output, however it can be disappointing if used in an open fire because it often spits and produces sparks that spit out.


Ash Oak is considered the most durable hardwood. It produces the highest warmth, but it is also very expensive. The cost is worth it but if you want the most sturdy and efficient wood for your fire place.

Contact us today if looking to add a new wood stove or fireplace to your home. We can provide you with information on the different types of wood burners we provide and assist you in choosing the right one for your requirements. Our Master Hearth Professionals certified by NFI will answer all of your questions.

6. Oak

Many people choose to use oak wood logs for their stove or firepit because of its lovely traditional smell. It burns longer than other types of logs, which means you'll be warm for longer. It is a great option for those who want to enjoy long nights in front of the fireplace or in the garden during summertime with family and friends chatting and drinking wine.

Hardwoods like hickory and oak are more dense than conifers, which means they burn hotter and longer. They also provide higher efficiency in fuel. This means they burn more hot and last longer, allowing more coals to rekindle the fire.

Beech

While beech logs are good quality, they can take a while to get seasoned and split. They do burn well, producing glowing flames and lots of heat. They are ideal to mix with other slow burning logs such as Ash or Oak.

You can find beech wood in local supermarkets and even in garden centers. But, you should avoid pallets used to transport lumber since they could contain screws and nails. They also will need to be treated with chemicals like methyl bromide so that they can be burned safely. If you are searching for a cheap wood to use for your log stove look into calling local tree trimming companies, construction crews or storm cleanup teams to see whether they have any unburned firewood that they could sell off. Be sure to check the wood you purchase for safety and ensure that it has been treated with a non-toxic preserver such as linseed oil or mineral oils.