Dual Fuel Range Cooker With 13amp Plug

Are you a home cook who appreciates the convenience of gas cooktops but needs an oven for baking? Discover a dual-fuel range cooktop that offers the best of both worlds.

Many home chefs with experience prefer gas cooktops due to their superior temperature control and the ability to use advanced cooking techniques such as charring. These powerful stoves can be costly particularly if they require an additional gas connection as well as an electrician for installation.

What is a 13amp plug?

If you have a dual fuel range cooker (also known as a gas and electric oven), then you'll need an appropriately rated 13 amp plug. The plug will also need to be wired hard into the cooker circuit using a competent electrician.

This ensures the current flowing through the plug will not exceed the safe limit that could result in an electrical fire. The current is controlled by a fuse in the plug. The fuse will blow when it is deemed to be overloaded. This protects the appliance from an overload of electricity.

The fuse is listed at 13 amps as shown on the top of the plug and this is the maximum amount of current that the plug is able to pass without causing harm to the appliance or overheating the socket. It is important that when replacing fuses, you always use the same amps as the original. If you replace the fuse with one that has an alternative rating, you are at risk of overheating the socket and putting you and others at danger.

Ceramic 13 amp fuses are very durable and can withstand the high temperatures from an oven. Ceramic elements are also fire-resistant, and is therefore a better option than other kinds.

There are several ways in which a 13 amp plug could be connected. The plug can be connected to a live socket by using either a screw or a jaw cord clamp. The plug is then pushed firmly into place and tightened, making sure the cord clamp is secure.

Before connecting the wires, you may have to remove the wiring diagram printed on cardboard that is placed over the pins of some plugs. It is crucial that the wires are trimmed to the proper length since cutting them too long could result in them becoming crushed when the plug cover is replaced. The earth wire should be the longest to ensure that it is connected before the neutral and line pins.

How do I install a 13amp plug?

The vast majority of dual fuel range cookers sold in the UK are wired to a 13 amp plug socket and this is very important since ovens draw a substantial amount of current and standard plug sockets are rated at 10 amps.

In general, new appliances should be fitted with a plug at the point-of-sale. This is to comply with the Plugs and Sockets etc. (Safety Regulations) 1994. However, older appliances might not have an outlet and that is where the issue arises.

The first thing to consider when connecting a cooktop to an existing plug socket is to ensure that the fuse rating in the fuse box is similar to the rating of the plug. This is crucial because an incorrectly-sized fuse can be dangerous.

It is also recommended to check that the fuse has been fully seated in the cartridge, and there isn't any excessive movement. The next step is to prepare the flex to be used. The first step is to remove the sheathing from the flex in order to expose the three conductors insulated within. Then, nick the sheathing at the entry point to the plug (beyond the cord grip) using a knife without penetrating the individual conductors that are insulated. The nick should be wide enough to allow for the sheathing and cable to separate as the sheathing is pulled back. Finally, cut off the excess sheathing, leaving about 40mm extending beyond the flex end.

The flex is then positioned over the plug and the earth terminal is placed at the top and neutral and live terminals at the bottom. duel fuel ovens of each pin is removed using conductors in the colour of the wire as a guide. The internal cable is then secured to the terminal using the cord grip. If the plug has a cord clamp that is screw-type, unwind it and then pull the insulation back to expose the copper wires. Connect each conductor that is insulated to the proper terminal (starting with the earth before neutral, and then the live) by using the channel that they run through in the plug.

What is the maximum draw of a 13amp plug?

The maximum current draw for the 13amp plug is 3kw at 230volts. This is a significant amount of power, but the standard fuse in the UK plug will not fail until the cable has reached to a dangerous temperature. A damaged plug or socket may cause a fire so it's important to keep an eye on how much power you use, especially in the kitchen.

The fuses in plugtops are ceramic, approximately 25mm in length and 240V mains rated. The fuses will bear the BS Kitemark or a similar mark on the side, and they'll also contain sand. Alternatives to glass or plastic are available, but should never be used in conjunction with live plugs.

In the UK the majority of dual fuel range cookers are hardwired. They are not able to plug directly into the wall outlet. They are usually connected using a dedicated cooker circuit, that is only suitable for appliances with a maximum of 20 amps.

You can test the ring circuit in your home by looking at the fuse box or asking a local electrician. Ask them if the sockets are on the same ring or if they are distinct. They will also be able to tell you if there is a separate circuit to power your oven.

The size of your kitchen is an important factor when you decide to purchase a dual fuel range cooker. We have a wide range of cookers that can be adapted to any space. Select from compact 50-60cm dual fuel models or huge 90cm+ double oven options from leading brands like Rangemaster and StovesAreUs.

We also have a wide variety of multifunction gas and electric cookers. These multifunction cookers can be used to cook a variety of dishes such as pasta, casseroles and curries!

Currys offers a variety of Cookers. Browse our online collection or visit us in store to view them. We offer free installation at home and delivery on selected range cookers as well as flexible payments options. If you have any queries our team is on hand to help - just drop us an email or give us a call. Credit is subject to the status of the account, and terms and condition apply.

What is the maximum current draw of a cooker switch?

There is a lot confusion regarding the maximum current draw for the cooker switch. Most cookers are hard-wired, and connected to a specific oven-ring circuit not a standard socket. This is because they will often consume far more than 20 amps of power each time the electric oven and gas hob are in use.

There aren't any dual fuel range cookers that can be fitted in a standard socket as this would pose an enormous fire risk and infringe electrical regulations. A professional electrician will always install any new electrical wiring to the kitchen cooker and will make sure that the total load (both the oven and the hob) will not exceed the supply capability of the circuit.

Dual fuel range cooker s mix the flexibility of a gas stove and the precision and precision of an electric oven. They are therefore a favorite among chefs as well as home cooks. If you're looking to test different cooking techniques, such as searing and charring, a dual fuel range cooker is the best choice.

When purchasing a new range cooker you'll need to take into consideration a number of factors like size, function and price. Additionally, you'll also need to make sure that your home is equipped with an appropriate gas hook-up to the appliance. If you're unsure, it's best to get an Gas Safe engineer inspect your property prior to installation.

Currys' dual fuel range cooker s are available with a variety of models to suit all budgets. From budget-friendly models from Indesit and Zanussi and our own Essentials collection. If you're looking for something more sophisticated we have a selection of premium JennAir models, that come with a number innovative features.


It is crucial to read the instruction manual for the owner before purchasing a dual-fuel range cooker. This will give you specific information regarding the electrical and gas requirements. You will need a gas connection in your home. A plumber could be required to connect it for you. Depending on the home, you will also need to make sure that you have a dedicated cooker ring circuit in place and endorsed by a qualified electrician.