Dual Fuel Range Cooker With 13amp Plug

Are you a home cook who appreciates the flexibility of gas cooktops but requires an oven to bake in? Find a dual-fuel range cooker that offers the best of both worlds.

Gas cooktops are the preferred choice of many home chefs who have years of experience in the kitchen due to their superior temperature control. They also permit them to utilize advanced cooking techniques such as charring. These powerful stoves can be costly particularly if they need an additional gas connection as well as an electrician for installation.

What is a 13amp plug?

If you own a dual fuel range cooker (also called an electric and gas oven) then you'll require an appropriately rated 13 amp plug. The plug should be wired by a qualified electrician into the cooker ring.

This ensures that the current flowing through the plug is safe and not too high which could result in an electrical fire danger. The current is controlled by a fuse within the plug. The fuse blows whenever the current is beyond its capacity. This protects the appliance from an overcharge of electricity.

The fuse is rated at 13 amps, as shown on top of the plug. This is the maximum amount of current that the plug can pass without damaging the appliance or causing heat to the socket. It is crucial that when replacing fuses you always use the same amps as the original. You risk overheating the socket if you replace a fuse with an unrelated rating.

Ceramic 13 amp fuses are very robust and are able to withstand extreme temperatures that can be generated by an oven. Ceramic is also fire-proof, which makes it a more suitable choice over other types of fuse.

There are many ways to install the 13 amp plug. It can be connected to an existing live socket, and the flex is then connected to it using an screw or a plastic jaw-type cord clamp. The clamp on the cord should be tightened after the plug has been tightly pushed into place.

Before connecting the wires, you may need to remove the wiring diagram printed on cardboard that is placed over the pins of certain plugs. The wires must be trimmed to the right length, because if they are too long they may be crushed when the plug covers are replaced. The earth wire must be the longest to connect it before the line and neutral pins.

How do I install a 13amp plug?

The majority of dual fuel range cookers in the UK are connected to a 13 amp plug socket and this is very important since ovens draw a substantial amount of current and standard plug sockets are capable of 10 amps.

Generally speaking, new appliances must be equipped with a plug at the point of sale and this is all part of complying with the Plugs and Sockets etc (Safety) Regulations 1994. However, older appliances might not have an outlet and that is where the problem arises.

The first step to take when connecting a cooktop to an existing plug socket is to ensure that the fuse rating in the fuse box matches the rating of the plug. This is vital since a faulty sized fuse could pose a risk.

It is also recommended to check that the fuse has been fully seated into the cartridge, and there isn't any movement. The next step is to prepare the flex that is to be used. Remove the sheathing from the flex in order to expose the three conductors insulated within. Utilize a utility knife to cut the sheathing beyond the cord grip at the entry point of the plug. This will not penetrate the insulated conductors. The nick should be large enough to allow the sheathing to split and enlarge the nick when it is pulled back revealing the cable underneath. Cut off the excess sheathing leaving a little more than 40mm over the flex.

The flex should be positioned over the plug, with the earth terminal on top and the neutral and live terminals on the bottom. The sheathing around each pin is removed using coloured conductors as a guide. The internal cable is then secured into the terminal with the help of the cord grip. If the plug is equipped with an attached cord clamp that is screw-type, let it loosen and then pull the insulation back to reveal the copper wires. Connect each insulated wire to the correct terminal using the channel in the plug. Start with the earth conductor first, then the neutral and then the live.

What is the maximum draw of a 13 amp plug?

The maximum current draw for 13amp plugs at 3kw at 230 volts is. This is a lot of power but the standard fuse that comes with a UK plug won't fail until the cable is at a risky temperature. commercial dual fuel range cookers or socket could cause fire, so it's vital to be vigilant about how much you are using particularly in the kitchen.

The fuse inside the plugtops are made of ceramic, about 25mm in length and 240V mains rated. They will be marked with an BS kitemark or similar marking on the side and contain sand. Glass or plastic alternatives are available, but they should not be used in combination with a live plug.

The majority of dual fuel range cookers sold in the UK need to be hard-wired and are not able to plug directly into the wall socket. They are usually connected to a dedicated cooker ring circuit that is suitable for appliances that use up to 20 amps.

You can verify the ring circuit of your home by looking at the fuse box or asking a local electrician. They will be able to inform you if the sockets in your home are connected to the same ring, or if they are separate and if there is a dedicated circuit for your oven.

If you're considering buying a brand new dual fuel range cooker, the size of your kitchen is a crucial factor to take into account. Luckily, we have a wide selection of cookers to suit any space, including compact 50 - 60cm dual fuel models as well as huge 90cm+ double oven options from leading brands like Rangemaster and StovesAreUs.

We also have a wide range of multifunction gas and electric cookers. These versatile machines let you cook a variety of meals such as curries, pasta, and casseroles!

Explore our full range of Cookers in Currys on our website or visit us in store for a look. We provide free home delivery and installation on selected range cookers, and we also offer flexible payment options. If you have any questions our team is on hand to help send us an email or give us a phone call. Credit is subject to status and terms and conditions apply.

What is the maximum draw of a switch for a cooker?

There is a lot of confusion about what the maximum current draw of a cooker switch is. The truth is that most cookers aren't designed to plug into a standard socket, but instead are wired hard and fed into an oven ring circuit. This is because they will typically consume more than 20 amps of power when the electric oven and gas hob are in use.

There aren't any dual fuel range cookers that can be fitted in a standard socket, since this could pose an extremely high risk of fire and infringe electrical regulations. An experienced electrician will install any new electrical wiring to an appliance in the kitchen, and they will ensure that the total load (both the oven and hob) does not exceed the power capacity of that circuit.

Dual fuel range cookers combine the flexibility of a gas stove and the precision and precision of an electric oven. This is the reason they are well-liked by chefs and cooks at home alike. Dual cookers with fuel ranges are ideal for experimenting with various cooking techniques, including searing or charcoaling.

When buying a new range cooker, you will need to consider several factors like size, function and price. In addition, you will also need to make sure that your home is equipped with the right gas hook-up for the appliance. If you're not sure you're not sure, it's recommended to have a Gas Safe engineer inspect your property prior to installation.

The Currys range of dual fuel range cookers has options to suit a variety of budgets, from basic models from Indesit and Zanussi to our exclusive Essentials collection. If you're looking for something little more advanced we also carry a wide selection of premium JennAir models, with a number of unique features.


It is important to read the user's manual before purchasing a dual-fuel range cooker. This will provide specific information regarding the gas and electrical requirements. You will need a gas connection in your home. A plumber may be required to set it up for you. Based on the type of home you live in you'll also need to make sure that you have a cooker ring circuit in place and approved by a licensed electrician.