Dual Fuel Range Cooker With 13amp Plug

Are you a home chef who loves the responsive heat control of gas cooktops but needs an electric oven for baking? Find a dual fuel cooker that gives you the best of both worlds.

Gas cooktops are the preferred choice of many home chefs who have years of experience in the kitchen due to their superior temperature control. They also permit the use of advanced cooking techniques, such as charcoaling. These powerful stoves can be costly particularly if they need an additional gas connection as well as an electrician to install them.

What is a 13amp outlet?

If you have a dual fuel range cooker (also known as a gas and electric oven) you'll need an electrical outlet of 13 amps. The plug also needs to be hard-wired into the cooker circuit using a competent electrician.

This ensures that the current flowing through the plug doesn't exceed the safe limit that could result in an electrical fire. The current is controlled by a fuse within the plug. The fuse will blow as soon as it is overloaded. This safeguards the appliance from an overload of electricity.

The fuse is rated at 13 amps, which is shown on top of the plug. This indicates the maximum amount of current the plug could carry without damaging the appliance or heating the socket. When replacing fuses, it's crucial to select the same amperage rating that was used in the original. There is a risk of overheating a socket when you replace a fuse with a different rating.

Ceramic 13 amp fuses are very durable and can withstand the high temperatures generated by the range cooker. Ceramic is also fire-proof, making it a more suitable option than other kinds of fuse.


There are several ways in which 13 amp plugs can be installed. The plug can be connected to a live socket by using screws or a plastic jaw cord clamp. The clamp must be tightened after the plug has been tightly pushed into place.

Before connecting the wires, you might need to take off the wiring diagram on cardboard which is placed on top of the pins on some plugs. The wires need to be cut to the correct length, because if they are too long they can get crushed when the plug covers are replaced. The earth wire should be the longest to connect it before the line and neutral pins.

How do I install an outlet with 13amps?

The vast majority of dual cookers that use fuel in the UK are powered by a 13 amp plug. This is vital because ovens draw a large amounts of current, while normal plug sockets have a 10 amp rating.

Generally speaking new appliances should be fitted with a plug at the point of sale and this is all part of complying with the Plugs and Sockets etc (Safety) Regulations 1994. Older appliances might not have a plug installed and this could be the reason for the issue.

When connecting a cooker to an existing plug socket, the first thing to do is to ensure that the rating of the fuse in the box matches the plug's rating. This is crucial because a fuse that is not properly sized could be dangerous.

It is also important to make sure that the fuse is fully installed within the cartridge and that there isn't any movement within it. The next step is to prepare the flex to be used. Remove the sheathing to reveal the three conductors that are insulated. Use a utility blade to cut the sheathing beyond the grip on the cord at the point of entry into the plug. This will not be able to penetrate the insulated conductors. The nick should be wide enough to allow the cable and sheathing to separate when the sheathing is pulled back. Cut off the excess sheathing leaving a little more than 40mm over the flex.

The flex is positioned over the plug and the earth terminal is placed at the top, and the live and neutral terminals at the bottom. The sheathing of each pin is removed using colored conductors as a reference. The internal cable is then secured to the terminal using the cord grip. If the plug is equipped with an attached cord clamp that is screw-type, let it loosen and then pull the insulation back to reveal the copper wires. Then, connect range cookers dual fuel insulated conductor to the proper terminal (starting with the earth, then neutral and finally the live) using the channel that they run through in the plug.

What is the maximum draw of a 13 amp plug?

The maximum current draw for 13amp plugs at 3kw at 230 volts is. This is quite a bit of power, but the standard fuse fitted in the UK plug will not fail until the cable has reached to a dangerous temperature. It is important to be aware of the electricity you use in your kitchen as a defective plug or socket can lead to an accident.

The fuse in plugtops is ceramic, about 25mm long and rated 240V mains. They'll be marked with an BS kitemark or similar mark on the side and will contain sand. There are cheaper plastic or glass alternatives but they shouldn't be used with a live plug unless you want to blow up the fuse and possibly be electrocuted!

In the UK the majority of dual fuel range cookers are hard-wired. They cannot be plugged directly into an outlet on the wall. They are typically connected through an exclusive cooker circuit, which is suitable only for appliances using up to 20 amps.

Check the ring circuit of your home with the fuse box, or ask an electrician nearby. Ask them if the sockets are connected to the same ring or if they're distinct. They should also be able to inform you if there's a dedicated circuit to power your oven.

The size of your kitchen is an important factor when you are looking to buy a dual-fuel range cooker. We offer a variety of cookers that will fit any space. Select from compact 50-60cm dual fuel models or vast 90cm+ double ovens from top brands like Rangemaster and StovesAreUs.

We also have a broad variety of multifunction electric and gas cookers. These multifunction cookers allow you to cook a variety of meals, like pasta, casseroles, and curries.

Currys offers a variety of Cookers. Browse our online collection or stop by our store to view them. We provide free home delivery and installation on selected range cookers as well as flexible payment options. If you have any queries or concerns, our staff are available to assist by sending us an email or give us a ring. Credit is subject to status, and terms & condition apply.

What is the maximum current draw of a cooker switch?

There is a lot confusion about the maximum current draw of the cooker switch. The reality is that the majority of cookers aren't designed to connect to a standard socket, but instead are wired hard and connected to a specific oven ring circuit. It is because they often consume more than 20 amps when the gas hob and electric oven are used.

So, you won't find a dual fuel range cooker that can be connected to a standard socket, as this would present a very dangerous fire hazard and is against electrical safety regulations. An experienced electrician will install any new electrics to the kitchen cooker and ensure that the load (both the hob and oven) do not exceed the capacity of supply of the circuit.

Dual fuel range cookers mix the flexibility of a gas stove and the precision and precision of an electric oven. They are adored by both chefs and home cooks. Dual cookers with fuel ranges are ideal for trying out different cooking techniques, including searing or grilling.

When you are looking to purchase a new range cook, you should take into consideration a variety of factors, including size, functionality, and price. In addition, you will also need to make sure that your home is equipped with an appropriate gas hook-up to the appliance. If you're not sure, it is best to book a Gas Safe engineer to inspect your home prior to installation.

The Currys range of dual fuel range cookers offers options that can be adapted to a range of budgets, from affordable models from Indesit and Zanussi to our own exclusive Essentials collection. If you're looking for something more advanced We have a range of premium JennAir models, which feature several new features.

It is essential to read the user's manual before purchasing a dual-fuel range cooker. This will give you specific information about the gas and electrical requirements. You will need a gas connection in your home. A plumber might be required to set it up for you. You may also need a cooker-ring circuit that is installed by a certified electrical engineer.