How to Install a Ghost Immobiliser

A ghost immobiliser is an effective deterrent for car thieves. By pairing this device with other security systems and staying alert, you can build a robust defense against modern, tech-savvy thieves.

Ghost immobilisers protect your vehicle from hotwiring and relay car thefts by requiring you enter the pin code to start the car. It works by using buttons that are already present on your center console or steering wheel, so it is undetectable to thieves.

Identifying the Wires

It is essential to secure your car since more and more vehicles are stolen without owners' keys. While thieves might be able to clone your key fob, or even steal your car by hacking its system, a ghost immobiliser adds an additional layer of security by blocking all signals from the key fob, making it impossible to start your car without entering a PIN.

While you could install a ghost immobiliser yourself, it is recommended to let an expert technician complete the job for you. A professional technician will know the best place to install the device and how to connect it to the wiring of your vehicle. Installation can be difficult and it's crucial that all connections are made correctly to avoid malfunctions or damage.

To get the most effective results, it is recommended to work in a well-lit area and wear appropriate safety gear. You should also read through the user's manual and familiarize yourself with the wiring system. This will enable you to identify the wires required for installation and ensure that you have the right equipment and components.

After the wiring is connected, you are able to reconnect the battery and test the system to see if it is functioning properly. To avoid electrical problems it is important to ensure that the battery's terminals are secured. Also, mark the CAN H and L wires with tape or labels to keep the track of them during the installation process.

The Ghost Immobiliser allows you to put your vehicle in Transport Mode when you need someone else to drive it for a short period of time, for example, for valet parking, or if the vehicle needs to be serviced. You can enter the code using a service button on the steering column, the centre console, or door panels. Then, the Ghost Immobiliser enters PIN code changing mode.

Some thieves attempt to bypass ghost immobilisers through jamming and spoofing devices which block or send fake messages to the system. This can be overcome by investing in modern anti-jamming technologies and monitoring your Ghost Immobiliser for indications of tampering.

Disconnecting the Battery

The ghost immobiliser is a cutting-edge security device designed to stop car theft. It utilizes cutting-edge technology to monitor and disable the engine once the correct PIN code is entered, thus stopping the vehicle from being driven away by thieves. The system is extremely effective and stealthy. ghost immobiliser near me doesn't have any visible indicators that would discourage criminals. You may need to remove your device to ensure maintenance, upgrades or when selling your vehicle.

This procedure requires special tools and knowledge, as you will be working using wires and bypassing specific factory components. It is important to follow the step by step instructions given by the manufacturer. You should also consult a professional auto electrician or mechanic, particularly if you don't have any prior experience working on cars.

After identifying the wires and disconnection it is crucial to verify the condition of your battery. Verify that the battery is clean, free of corrosion and that all connections are secure. If necessary, think about replacing the battery to ensure that it is strong enough to withstand the demands of a security system that is aftermarket.

After you have disconnected the wiring, you can remove the ghost immobiliser. Wire cutters or strippers are a good way to disconnect the wires. Be careful not to cause damage to them or their terminals. Label each wire so that it is easier to reconnect them later. If the wires are soldered, use an instrument that can withstand heat to break the connection. To avoid short-circuits, it is crucial to wrap the wires with insulation tape or heat shrink tubing.

Connect the wires using the 12V constant power source. Use a fuse tap to protect the connections with a fuse. Connect the grounding wire to a solid grounding on the vehicle's chassis.

After you have connected your wires, start your vehicle and enter the PIN. Then, start the engine. If the engine does not start then you have successfully removed the ghost immobiliser.

Making the Connections

A ghost immobiliser is an affordable method to increase the security and safety of your vehicle. It is connected to the CAN bus system inside your vehicle, capturing signals, and preventing the vehicle from starting until the right PIN code has been entered. how much is a ghost immobiliser is almost impossible to disable. It's a great choice for drivers who want extra peace of mind and security. In combination with a Thatcham Approved tracking system, it can also help to lower your insurance premium.

It is vital to find and review the wiring diagram for your vehicle model before you start the installation. The diagram will serve as a reference to identify the wires that are required for a precise connection. Using the proper wiring connectors or soldering techniques will ensure that the connection is long-lasting and secure.

The wires that connect the Ghost immobiliser to the CAN bus system must be identified and connected correctly. It is recommended to use small pieces of tape or labels to identify the CAN H and CAN L wires, since this will help to prevent confusion during the installation process. The wires are placed differently on each vehicle. It is crucial to refer to the wiring diagram or online resources to determine them.

After the correct wires are connected, the power to the Ghost immobiliser will be restored. It is a good idea to test the immobiliser's operation by starting the engine but not entering the PIN code. This will ensure that the immobiliser has been installed correctly and functioning as intended. It is essential to test your immobiliser on a regular basis. This will help you identify any problems or issues early.

Another benefit of the ghost immobiliser is that it can be set up in just a few minutes and does not require any cutting or modification to the internal wiring of your vehicle. It is also an excellent option for those who want to enhance the security of their vehicles, since it can be used together with a Thatcham-approved alarm or tracker that will notify your phone or tablet when the vehicle is tampered with.

Mounting the Unit


The Ghost immobiliser is a great deterrent against car thieves, particularly when paired with the GPS tracking system. The device makes use of buttons on the centre console, doors, and steering wheel to create a unique sequence that you can only recognize. This prevents your car from starting. It is also weatherproof and tamper-proof. It comes with a 3 year warranty and is endorsed by many insurance companies.

It is essential to follow the directions when installing the device. If you're unsure you're not sure, consult a professional. Wire strippers and multimeters are essential tools to locate the wiring and make precise connections. It's also recommended to buy some insulation and electrical tape for protecting the connections from damage. It's a good idea to test your device after the installation is completed to make sure that everything works as it should.

Ghost immobilisers are a fantastic option to protect your vehicle especially in areas with high crime rates. It can be linked with an iPhone application to make it easy to manage and monitoring. It stops key cloning as well as ECU swapping and other security threats. It's a popular choice for vehicle owners who want to safeguard their investment. It's simple to install.

The Ghost II immobiliser is designed with a slim, low-profile design that makes it virtually invisible to thieves. It connects to your vehicle's CAN (Controller Area Network) and stops you from starting the engine without entering a PIN code. The PIN code is generated by pressing a set of buttons on your steering wheel or console, or even your the door. It can also be changed at any point. The device is also tamper proof and includes an GPS tracker that can assist police locate your vehicle in the event of a car theft. It's a great option to safeguard your car from thiefs and it's fully Thatcham-approved.