Dual Fuel Range Cooker With 13amp Plug

Are you a home cook who enjoys the flexibility of gas cooktops but needs an oven to bake in? Find a dual fuel cooker that gives you the best of both worlds.

Gas cooktops are favored by many home chefs with expertise in the kitchen because of their superior temperature control. They also allow them to use advanced cooking techniques, such as charring. These powerful stoves are costly particularly if they need an additional gas connection as well as an electrician for installation.

What is a 13amp outlet?

If you own a dual-fuel range cooker (also known as a gas and an electric oven), you will need a 13 amp plug. The plug will also need to be wired in the cooker circuit using a certified electrician.

This ensures the current flowing through the plug doesn't exceed the limit of safety, which could lead to an electrical fire. The plug is equipped with an electric fuse that regulates the current. The fuse goes out when the current passes through it over its capacity, which safeguards the appliance from an overcharge of electricity.

The fuse is rated 13 amps, as indicated on the top of the plug. This indicates the maximum amount of current that the plug can pass without damaging the appliance or causing heat to the socket. When replacing fuses, it is essential to select the same amperage rating that was used in the original. You run the risk of overheating a socket if you replace a fuse that has a different rating.

A 13 amp fuse is likely to be a ceramic type, which is very robust and able to withstand the extreme temperatures generated by the range cooker. Ceramic elements are also fire-resistant, and therefore a better choice than other kinds.

There are a few different ways in which 13 amp plugs can be fitted. The plug can be connected to a live socket by using a screw or plastic jaw cord clamp. The plug is then pushed firmly into place and tightened, making sure the cord clamp is secure.

Before connecting the wires you may need to remove the wiring diagram on cardboard which is placed over the pins of certain plugs. It is crucial that the wires be cut to the correct length as cutting them too long could cause them to break when the plug cover is replaced. The earth wire must be the longest one to ensure it is connected before the neutral and line pins.

How do I fit the 13amp plug?

The vast majority dual cookers that use fuel in the UK are equipped with a 13 amp plug. This is crucial because ovens draw a substantial current, while normal plug sockets have a 10 amp rating.

In general, new appliances should have a plug installed at the point-of-sale. This is to comply with the Plugs and Sockets etc. (Safety Regulations) 1994. Older appliances may not have a plug and this is the problem.

When connecting the cooker to an existing plug socket, the first thing to do is to ensure that the rating of the fuse inside the fuse box is the same as that of the plug's. This is vital since a faulty sized fuse could pose a risk.

It is also recommended to check that the fuse is set within the cartridge and that there isn't any movement within it. The next step is to prepare the flex that will be used. Remove the sheathing to expose the three conductors insulated. Next nick the sheathing at the entry point to the plug (beyond the cord grip) using a utility knife, but without damaging the individual conductors that are insulated. dual fuel range cookers uk should be large enough to allow for the sheathing and cable to separate when the sheathing is pulled back. Cut off the excess sheathing, leaving around 40mm beyond the flex.

The flex should be positioned over the plug with the earth terminal on the top and the live and neutral terminals on the bottom. The sheathing around each pin is removed using the conductors in the colour of the wire as a guide. The internal cable is then fixed to the terminal by with the help of the cord grip. If the plug has an attached cord clamp that is screw-type, let it loosen and then pull the insulation back to reveal the copper wires. Then, connect each insulated conductor to the appropriate terminal (starting with the earth first, then neutral and finally the live) using the channel they run through the plug.


What is the maximum draw of a 13amp plug?

The maximum current draw for the 13amp plug is 3kw at 230 volts. This is a lot of power, however the standard fuse fitted in a UK plugtop will not fail until the cable is heated to a risky temperature. It is important to be aware of the electricity you use in your kitchen as a faulty plug or socket can cause an accident.

The fuse in plugtops is ceramic, about 25mm long and rated 240V mains. They will have an BS kitemark or similar mark on the side and will contain sand. There are cheaper glass or plastic alternatives, however they shouldn't be used with a live plug or else you could blow up the fuse and possibly be electrocuted!

In the UK, most dual fuel range cookers are hardwired. They are not able to plug directly into an outlet on the wall. They are usually connected to a separate cooker ring circuit that is suitable for appliances that consume up to 20 amps.

Check the ring circuit at your home by using the fuse box, or ask an electrician nearby. They will be able to inform you if the sockets within your home are connected to the same ring, or if they are separate and if there is a dedicated circuit for your oven.

When you're looking to buy a brand new dual fuel range cooker, the size of your kitchen is an important aspect to take into consideration. We offer a broad selection of cookers that can fit any space. Select from compact 50-60cm dual-fuel models or vast 90cm+ double oven options by leading brands such as Rangemaster and StovesAreUs.

We also have a wide range of multifunction electric and gas cookers. These versatile machines let you cook a variety of meals including curries, pasta, and casseroles!

Currys offers a variety of Cookers. Browse our online collection or visit us in store to see the range. We offer free home installation and delivery on certain range cookers, as well as flexible payments options. Our team is available to answer any questions you might have. You can contact us by email or telephone. Credit is subjected to status, and terms & conditions apply.

What is the maximum current draw of a cooker switch?

There is a lot of confusion about what the maximum current draw of a cooker's switch is. Most cookers are hard-wired and connected to a dedicated oven-ring circuit, not an ordinary socket. This is due to the fact that they usually consume more than 20 amps when the electric and gas hob oven are being used.

There aren't any dual fuel range cookers that are able to be fitted in a standard socket as this would pose a significant fire risk and violate electrical regulations. A licensed electrician will install any new electrical wiring to the kitchen cooker and ensure that the total load (both the hob and oven) do not exceed the power capacity of the circuit.

The advantages of a dual-fuel range cooker include the responsive heating of a gas cooktop along with the precision of an electric oven. They are therefore popular with chefs as well as home cooks. Dual fuel range cookers are perfect for experimenting with various cooking techniques, like searing or charring.

When purchasing an appliance for your kitchen, you'll need to take into consideration various aspects such as size, functionality and price. Additionally, you'll also need to make sure that your home is equipped with a suitable gas hook-up for the appliance. If you're unsure you're not sure, it's recommended to have an Gas Safe engineer inspect your home prior to installing.

The Currys range of dual fuel range cookers includes options to fit a variety of budgets, from affordable models from Indesit and Zanussi to our own exclusive Essentials collection. If you're looking for something bit more sophisticated We also have a variety of top JennAir ranges, which come with a number of new features.

When purchasing a new dual fuel range cooker, it's crucial to consult the manual of the owner for specific details on the electrical and gas requirements. It is essential to ensure that your house has a gas hook-up that is suitable, and you may need to have a plumber install this for you if necessary. Based on the type of home you live in you'll also have to make sure that you have a dedicated cooker ring circuit that is installed and approved by a qualified electrician.