Dual Fuel Range Cooker With 13amp Plug

Are you a home chef who enjoys the fast cooking control of gas cooktops but needs an electric oven for baking? Discover a dual-fuel range cooker that gives you the best of both worlds.

Gas cooktops are preferred by many home chefs who have years of experience in the kitchen because of their superior temperature control. They also permit the use of advanced cooking techniques like grilling. These powerful stoves are expensive particularly if they need an additional gas connection as well as an electrician for installation.

What is a 13amp plug?

If you own a dual fuel range cooker (also called an electric and gas oven), then you'll need an appropriately rated 13 amp plug. The plug will also have to be wired in the cooker circuit using a certified electrician.

This ensures that the flow of current through the plug does not exceed the limit of safety which could cause an electrical fire. The plug is equipped with an electric fuse that regulates the current. The fuse goes out when the current is over its capacity, which protects the appliance from an over-charge of electricity.

The fuse is rated 13 amps, as indicated on the top of the plug. This indicates the maximum amount of current the plug could carry without damaging the appliance or causing heat to the socket. It is crucial that when replacing fuses you always use the same amps as the original. If you replace the fuse using one with the different ratings, you are at risk of overheating the socket and possibly putting yourself and others in high risk.

A 13 amp fuse will be a type of ceramic, which is very robust and able to withstand the extreme temperatures generated by the range cooker. The ceramic element is also fire-resistant, which makes it a better option than other kinds of fuse.

There are several ways to install a 13 amp plug. It can be connected to an existing live socket. the flex is then connected to this by a screw or plastic jaw-type cord clamp. The clamp on the cord should be tightened after the plug has been tightly pushed into place.

Before connecting the wires you may need to remove the cardboard wiring diagram that is placed over the pins of some plugs. The wires need to be cut to the proper length, as when they are too long they may be crushed when the plug covers are replaced. The earth wire should be the longest in order to connect it prior to the neutral and line pins.

How do I install an outlet with 13amps?

The majority of dual fuel range cookers sold in the UK are connected to an outlet with a 13 amp rating and this is crucial since ovens draw a substantial amount of power and standard plug sockets are only designed to handle 10 amps.

In general, new appliances should be fitted with a plug at the point-of-sale. visit this website link is to comply with the Plugs and Sockets etc. (Safety Regulations) 1994. However, older appliances may not be connected to a plug and this is where the problem arises.

The first step to take when connecting a cooktop to an existing plug socket is to ensure that the rating of the fuse in the fuse box matches that of the plug. This is very important as an incorrectly sized fuse could pose a risk.

It is also recommended that the fuse has been completely seated into the cartridge, and there is no excessive movement. Next up is to prepare the flex to be used. Remove the sheathing from the flex, exposing the three insulated conductors within. Use a utility blade to nick the sheathing just beyond the cord grip at the entry point of the plug. This will not penetrate the insulated conductors. The nick should be wide enough that the sheathing can split and then expand when it is pulled back, revealing the cable beneath. Finally, cut off the excess sheathing leaving about 40mm extending beyond the flex end.

The flex is then positioned over the plug, with the earth terminal at the top, and the live and neutral terminals at the bottom. The sheathing on each pin is removed using the conductors in the colour of the wire as a guide. The internal cable is then fixed to the terminal using the cord grip. If the plug is equipped with a clamp for cords that is screw-type, let it loosen and then pull the insulation back to reveal the copper wires. Connect each insulated wire to the correct terminal by using the plug's channel. Start with the earth conductor and then the neutral and finally, the live.

What is the maximum draw of a 13amp plug?

The maximum power draw of a 13amp plug is 3kw at 230volts. This is quite a bit of power, however the standard fuse that is fitted in a UK plugtop will not fail until the cable has heated to a dangerous level. It is crucial to be aware of the amount of power you're using in your kitchen as a faulty plug or socket can lead to a fire.

The fuses in plugtops are ceramic, around 25mm long and 240V mains rated. They will have an BS kitemark or similar marking on the side and contain sand. Glass or plastic alternatives are available, but they should not be used in combination with a live plug.

In the UK the majority of dual fuel range cookers are wired. visit this website link are not able to plug directly into the wall outlet. They are usually connected to a specific cooker ring circuit that is suitable for appliances that consume up to 20 amps.

You can test the ring circuit at your home by examining the fuse box or by asking a local electrician. You can ask whether the sockets are on the same ring or if they are distinct. They should also be able to inform you if there is an individual circuit that powers your oven.

The size of your kitchen is a major factor when you're looking to purchase a dual fuel range cooker. We offer a variety of cookers that can be adapted to any space. Choose from compact 50-60cm dual fuel models or vast 90cm+ double oven options by leading brands such as Rangemaster and StovesAreUs.

We also have a broad selection of multi-function electric and gas cookers. These multifunction cookers can be used to cook a variety of dishes including curries, casseroles, and pasta!


Explore our complete range of Cookers in Currys online or head in-store to browse. We offer free installation at home and delivery on certain range cookers as well as flexible payments options. Our team is on hand to answer any questions you have. You can contact us via email or phone. Credit is subject to status and terms and conditions apply.

What is visit this website link of the cooker switch?

There is a lot of confusion about what the maximum current draw of a cooker switch is. The reality is that the majority of cookers aren't designed to plug into the standard socket, but rather are hard wired and fed into an oven ring circuit. This is because they will typically consume more than 20 amps of power each time the gas and electric ovens are used.

There aren't any dual fuel range cookers that can be fitted in a standard socket as this would pose an enormous fire risk and infringe electrical regulations. A professional electrician will always install any new electrical wiring to an appliance in the kitchen and ensure that the total load (both the oven and hob) will not exceed the supply capability of the circuit.

Dual fuel range cookers blend the responsiveness of a gas stove and the precision and accuracy of an electric oven. This is why they're well-liked by chefs and cooks at home alike. Dual cookers that use fuel are great for experimenting with various cooking techniques, including searing or charring.

When purchasing a new range cook, you should take into consideration a variety of factors that include size, performance and price. You will also need an electrical connection to your home for the appliance. If you are unsure then book a Gas Safe engineer to inspect your property before installation.

Currys dual fuel range cookers are available with a variety of models to meet all budgets. From budget-friendly models from Indesit and Zanussi, to our own Essentials collection. If you're looking for something a bit more sophisticated we also carry a variety of top JennAir models, with several new features.

If you are buying a brand new dual fuel range cooker, it is crucial to consult the manual of the owner for specific information on the gas and electrical requirements. You will need to ensure that your house has a gas hook-up that is suitable, and you may need to hire a plumber to install this for you, if needed. You might also require an individual cooker-ring circuit installed by a qualified electrical engineer.