How to Install a Ghost Immobiliser

A ghost immobiliser guards your vehicle from key cloning or hacking. It prevents the engine from running until a PIN number is entered. This could be as long as 20 characters.

This additional layer of security isn't visible to thieves who might not be expecting it. Some systems have an app which allows the owner to deactivate their immobiliser if they forget their PIN code or to use the service/valet mode.

Connecting to the vehicle's CAN bus

The Ghost 2 Immobiliser is a cutting-edge security system, can be integrated directly into the ECU of your vehicle. It offers a discrete barrier against thieves. It is highly efficient and user-friendly and can be a valuable component of your vehicle's security arsenal. Like all anti-theft devices, it's not foolproof and requires regular maintenance to function effectively. Luckily, this guide will assist you in getting the most out of your Ghost 2 Immobiliser.

CAN (Controller Area Network) is a reliable serial network that allows microcontrollers to communicate with one another across short distances without the necessity of a central control unit. It is designed to multiplex electrical wiring in vehicles, saving on copper. It has numerous advantages, such as the low cost and ease of use.

The CAN protocol is utilized in the majority of modern cars to communicate with the engine management system, transmission controller, steering control module, air conditioning controls, and more. It also carries sensor information, such as speed sensors and other inputs, in order to control the various features of the car. The CAN bus can be used to monitor the health of these various components and can prevent the vehicle from starting if it is in an unsafe condition.

It's crucial to understand how the CAN bus operates and how it is secured. It's possible to add new features to a vehicle using CAN bus, however it is important to protect it against attacks from hackers and other dangers. The best way to achieve this is to install firewalls and monitoring your CAN bus through software.

Ghost2's discrete control unit is hidden in the dashboard or wiring harness, preventing a thief from physically tampering it. It is impossible to reset a pin code or emergency code without having access to the car.

You can turn on Transport Mode if you need to surrender your vehicle for valet parking, service or for any other reason. This option disables the Ghost immobiliser's ignition and keyfob functions, and will only reactivate when the car reaches 31 mph for 15 minutes.

How do you create a PIN code


The Ghost immobiliser protects your car from theft. The revolutionary technology utilizes the PIN to shut down the vehicle's engine and prevent it starting without the correct code, or an authorized fob or mobile. The system's sleek design makes it unnoticeable, and offers unrivaled security against theft. The system is TASSA-verified and could save you substantial amounts on your car insurance.

During the installation, Ghost enters a "learning mode" to record the sequence of buttons pressed in order to create your unique pin codes. Once the pin code is created the installer will guide you through the process of activating the system. Once activated it will Ghost system will shut down the motor that starts your vehicle until a valid PIN has been entered or the vehicle is switched into transport mode. This makes it extremely difficult for thieves to duplicate or hack into your vehicle's start system.

It is easy to install a Ghost immobiliser, but you must follow the precise instructions in the user's guide to ensure that it is operating properly. Basic hand tools can assist in making accurate connections and a multimeter will help you verify electrical values. Insulation tape and heat shrink tubing are a great way to protect the exposed wiring Cable tie-ups are crucial to keep everything tidy and secure. Also, make sure to test the system frequently to spot any issues or potential errors.

It is crucial to check the system one final time before you turn on the ignition. Ghost immobilisers will arm themselves after 3 to 30 second depending on the model of the vehicle. The system also comes with an option for Service/Valet that allows you to temporarily disable the system while you are servicing your vehicle or valet parking.

The immobiliser should be hidden in a discreet location beneath the dashboard or steering wheel. Use a small piece tape or paint on the wires CAN H and L to make them easier to find when you are testing. The CAN H and the L wires should be connected to an electrical source that delivers continuous 12V. It is also essential to check the connections following testing, since misidentifying these wires can cause the system to malfunction.

Invoking the system

A ghost immobiliser blocks your vehicle from starting until you press a series of buttons within the car typically the steering wheel, door panel, or central console. The sequence is set by the user and can be altered at any time. Once the system is activated it is not able to be disabled by thieves, making it a good choice for anyone who wants to secure their vehicle from theft.

The system is designed to be undetectable. This means it isn't detected by modern diagnostics or code-grabbing technologies. It doesn't emit radio frequencies making it even more difficult for thieves to find.

If the device is detected, it will prevent the engine from running and sound an alarm with a loud sound to scare off thieves. The device can be used to track the location of a vehicle, which will assist in the recovery of the vehicle in case it is stolen.

If you're interested in a ghost immobiliser call the experts at Car Specalist Customs to get an estimate and discuss your options. We are able to install ghost immobilisers on your vehicle. We will make sure that it is hidden in an area that is difficult to reach. We also offer other security measures such as a wheel lock and kill switch to help protect your vehicle from thieves.

Disarming the system

It's important to understand how to disarm the Ghost immobiliser, if it's installed on your car. This will aid you in the case that you lock your keys inside the car or when your battery goes out of. The system has a unique PIN code that only you are aware of. It cannot start the car without this code. The simplest method to enter the code is to press a series of buttons on your dashboard or the steering wheel. This is a lot easier than using a key fob and stops others from copying your remote.

Ghost2 is noninvasive unlike other immobilisers from the aftermarket which require cutting wires for installation. It also integrates with the CAN bus system of your vehicle to operate. Its most prominent feature is that it shuts off the engine without affecting vehicle functions. This makes it very difficult for thieves to use signal boosts or clone car keys. It doesn't emit radio frequency, therefore thieves are unable to detect it.

The Ghost system has the option of a Transport Mode that allows you to temporarily disable security for situations such as transportation or service. This feature is great when you're lending your vehicle to someone else without sharing your PIN code or if your vehicle requires to be kept secure even while you drive it. Press the button five times within 2 seconds to activate the Transport Mode. ghost immobiliser and tracker will confirm activation with five indication signals.

When you're done, remember to save the emergency code in a secure location outside of your vehicle. If ghost immobiliser review find yourself locked out of your vehicle, you can call the technician or company who installed the system, and they'll give you the code. If you cannot reach them You can always try to contact an authorized dealer however this will require verification procedures and could incur additional costs.

Aside from the convenience of this system, you can rely on it to protect your car against theft and cut down on insurance costs. Insurance companies often offer reduced monthly premiums, or even financial incentives for installing this anti-theft device.