Autowatch Ghost Immobiliser Installation

The Ghost is the most advanced aftermarket in the UK. CAN bus immobiliser. It's discrete, doesn't employ LED indications or key fobs and is concealed within the wiring of the vehicle.

It also permits the user to turn off the system temporarily through Transport Mode to use it when they are renting out their vehicle. This guide will walk you through the installation process of a Ghost immobiliser.

Professional Installation

The Autowatch Ghost immobiliser is a cutting-edge security device that protects your vehicle from hacking, key cloning, and relay attacks. The system links directly to your car's ECU and is protected by a unique PIN code that you choose. It is undetectable by thieves using diagnostic scanners or other advanced methods. It isn't able to be disabled using circuit cuts.

The system is easy to use, however professional installation is recommended to ensure a smooth connection to the ECU of your vehicle. Installers approved by Thatcham can assist with the installation and programming of your Ghost system. They can also suggest a tracking device or alarm system to complete the protection package for your vehicle.

To avoid the accidental deployment of short circuits or airbags The installer must first disconnect your battery. Once this is done the installer is now able to begin work. Basic hand tools are helpful for making precise connections and a multimeter can be used to verify electrical values and safety. Cable ties and insulation tape are also vital for protecting connections and keeping wiring neat. The Ghost Immobiliser user manual will provide specific instructions specifically tailored to your specific model.

It is crucial to select a grounding location that is free of paint or debris during installation. The installer should also make sure the immobiliser's CAN H as well as CAN L wires are connected to the correct ports on the vehicle's ECU. These wires can be plugged into or soldered depending on the model. To ensure a reliable and durable connection, it is recommended that you choose a high-quality plug.

Transport Mode can be turned on by the customer once the installation is complete. This allows mechanics or valet parking to use the vehicle without having to know the pin code. The customer must press the service icon on the dashboard five times in 2 seconds. The system will confirm this by showing five indicators.

The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. autowatch ghost 2 immobiliser 's a smart option for those who regularly rents out their cars on platforms such as Turo. Immobilisers can also reduce insurance premiums, since it reduces the likelihood of theft.

Getting Started

It's not difficult to come up with an autowatch immobiliser in order to guard your vehicle from theft. The device stops your car from running even the case that someone steals or copies your key. It's possible due to its advanced technology that stops the engine from starting until the correct PIN code has been entered.

The device works by connecting to the vehicle's CAN bus network and allowing it to communicate with the ECU directly. It uses buttons that are already present on the dashboard and wheel to create a unique sequence only you can identify which makes it impossible for others to start your car. This is the most secure way to protect your pride and joy. It will not lose its value if you ever want to sell it.

Installing a ghost immobiliser can be an easy procedure, but it's important to follow the directions carefully to avoid issues with electricity and system malfunctions. First, you must find and locate a permanent 12V power source and a good grounding point on the vehicle's chassis. Then, you can begin connecting the wires that will be used to activate the immobiliser. Make use of high-quality connectors and soldering methods to create a secure connection. Connect the connections with heat shrink tubing, insulation tape or other materials to prevent electrical short circuits.

After the wires have been connected, you can connect the battery and then turn on the engine to test the immobiliser's functionality. If everything is functioning properly, you can install it in a safe location beneath the dash or anywhere else in the vehicle. Be sure to conceal it securely so that thieves can't alter it.

The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association), which means it is a high-quality deterrent to car burglars. It is resistant to hacking and key cloning and cannot be disabled without the code. It is also simple to use and is able to be put into an auto valet mode so that your vehicle isn't activated if you bring it in for servicing or an MOT.

Wiring

The Ghost Immobiliser is a cutting-edge security system that's designed to stop theft of vehicles. It connects directly to the vehicle's CAN bus and communicates with the ECU and ECU, making it a virtually undetectable addition to your vehicle. The Ghost Immobiliser will not interfere with the factory settings of your vehicle, unlike other aftermarket systems which require the removal of circuit elements.

It's also completely undetectable to thieves using diagnostic scanners. This is because the system doesn't transmit and receive radio frequency signals, and it relies on the CAN data format to communicate with your ECU. Additionally, it doesn't require any modification to your vehicle's existing key fobs.

Enter your disarm sequence (either two or one buttons) and turn on the ignition of your car to activate the Ghost Immobiliser. The indicator will flash twice to confirm that you have entered the correct code. After this, you can start your vehicle and drive off safely.

Once installed Once installed, the Ghost Immobiliser will secure your vehicle from key cloning and hacking and will also protect the value of your pride and joy. In Transport Mode, you can temporarily disable the Ghost Immobiliser if you need to hand your vehicle to service or valet park.

To complete the Ghost Immobiliser installation, you'll need to locate an energy source that is constant (12V) and a grounding point. Be sure that both are well-insulated and can be touched. It's also recommended to use cable tie to secure and bundle the wires, as this will reduce the risk of tampering by potential thieves. To avoid committing mistakes, make sure to double-check these points and mark them with labels or tape. Examine every connection for signs that they're getting worn out. Connections that are loose can cause system malfunctions, so be sure that they're firmly fixed and well-insulated. Make sure to test your Ghost Immobiliser once the installation is completed. This will make sure that the unit is functioning properly and that all connections are secure and insulated. Be sure to correct any issues as soon as they arise.


Testing

The Autowatch Ghost Immobiliser is a cutting-edge car security system that seamlessly into your car's ECU to stop the engine from starting without authorization. Its innovative technology safeguards your vehicle from key cloning and hacking and other methods commonly employed by thieves to steal vehicles. The Ghost is a perfect complement to existing tracking and alarm systems to provide the best security for your vehicle. The Ghost's unparalleled features, coupled with its secluded design makes it a preferred choice for car enthusiasts and security conscious drivers.

In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, you must to follow the steps of the installation process. Refer to the wiring diagram of the vehicle as it will aid you in locating and connecting the wires. The next step is to determine the grounding and power sources. Once you have located them, you'll need to mark the points to make them easy to identify when installing. Finally, it's important to use top-quality tools and materials. Basic hand tools will aid in making precise connections. A multimeter can verify electrical values, and also ensure security. Cable tie and insulation tape ensure that all connections are neat. A Ghost-specific user's manual is also available.

It is crucial to test the system prior to installing it. Enter the PIN code into the system and start the vehicle. This test will verify that the immobiliser functions as intended, preventing unauthorised vehicle start-ups. It is recommended that you perform this procedure regularly as part of your routine vehicle inspections to ensure that the system is working properly.

Once the installation is complete Once the installation is complete, you can drive your car with confidence. The Ghost will keep your pride and joy secure from thieves who might steal it and ensure that no one can drive off with your vehicle without the correct PIN. The Ghost can be paired with an approved Thatcham tracker that detects any attempts at theft or tampering. This allows you to track your car in the event that it's stolen.

The Ghost can be used on a wide range of vehicles and is compatible with the majority of major brands. Monty's Locksmith can assist you in securing your vehicle with this innovative device. Contact us today to find out more about our services and installation options. We are a TASSA registered installer, a certificate that guarantees we follow strict standards for installing our products. This ensures customers, insurance companies, and law enforcement agencies that all installations are done safely and correctly.