Dual Fuel Range Cooker With 13amp Plug

Are you a home cook who enjoys the responsiveness of gas cooktops, but still requires an oven for baking? Find a dual fuel cooker that gives you the best of both worlds.

Gas cooktops are preferred by many home chefs who have expertise in the kitchen due to their superior temperature control. They also allow the use of advanced cooking techniques, such as charring. These powerful stoves are costly particularly if they require an extra gas connection and an electrician to install them.

What is a 13amp plug?

If you have a dual fuel range cooker (also called a gas and electric oven), then you'll need an appropriately rated 13 amp plug. The plug should also be hard-wired by a qualified electrician into the cooker ring.

This assures that the current that flows through the plug is secure and not too high which could cause an electrical fire danger. The plug is equipped with an electrical fuse that regulates the current. The fuse goes out when the current passes through it beyond its capacity, which protects the appliance from an overcharge of electricity.

The fuse is rated at 13 amps as shown on the top of the plug. this indicates the maximum current that the plug can carry without causing harm to the appliance or overheating the socket. It is essential that when replacing fuses you always use the same amperage as the original. You run the risk of overheating the socket if you replace a fuse with an unrelated rating.

Ceramic 13 amp fuses are very durable and can withstand high temperatures generated by a range cooker. The ceramic element is also fire-proof, making it a better option than other types of fuse.

There are a few different ways in which a 13 amp plug could be connected. It may be wired to an existing live socket. the flex is then connected to it using an screw or a plastic jaw-type cord clamp. The clamp must be tightened after the plug has been firmly pushed into place.

Before connecting the wires, you may have to remove the wiring diagram printed on cardboard that is positioned over the pins of some plugs. It is essential that the wires are trimmed to the correct length as leaving them too long can cause them to be crushed when the plug cover is replaced. The earth wire should be the longest wire to ensure it is connected before the line and neutral pins.

How do I install a 13amp plug?

The vast majority of dual fuel range cookers in the UK are connected to an outlet with a 13 amp rating and this is crucial since ovens draw a substantial amount of current, and the standard plug sockets are capable of 10 amps.

Generally speaking, new appliances must be fitted with an outlet at the time of sale. This is part of ensuring compliance with the Plugs and Sockets etc (Safety) Regulations 1994. Older appliances might not have a plug installed and this is the problem.

The first step to take when connecting a cooktop to an existing plug socket is to ensure that the rating of the fuse in the fuse box is similar to the rating of the plug. This is important because an incorrectly-sized fuse can be dangerous.

It is also recommended to ensure that the fuse is fully seated into the cartridge, and there isn't any movement. The next step is to prepare the flex that will be used. The first step is to remove the sheathing from the flex to expose the three insulated conductors within. Use a utility blade to nick the sheathing just beyond the grip of the cord at the entry point of the plug. This won't be able to penetrate the insulated conductors. This nick should be wide enough that the sheathing can split and then expand as it is pulled back to reveal the cable underneath. Cut off the excess sheathing leaving a little more than 40mm over the flex.

The flex is placed over the plug, with the earth terminal on top and the neutral and live terminals on the bottom. The sheathing around each pin is removed using the coloured conductors as a guide. The internal cable is then secured into the terminal with the help of the cord grip. If the plug is fitted with an screw-type clamp for cords loosen it, and then pull back the insulation to expose the copper conductors. Connect each wire that is insulated to the correct terminal using the channel inside the plug. Begin with the earth conductor first, then the neutral and then the live.

What is the maximum draw of a 13 amp plug?

The maximum current draw for a 13amp plug at 3kw at 230 volts is. This is a lot of power, but the standard fuse that is fitted in a UK plugtop will not fail until the cable has heated to a risky temperature. A defective plug or socket could result in a fire, so it's important to be aware of how much you are using, especially in the kitchen.

The ceramic fuses used in plugtops weigh around 25mm in diameter and are designed for mains voltage of 240V. They will have an BS kitemark or similar marking on the side and contain sand. There are also cheaper glass or plastic alternatives, but they should never be used with a live plug, or else you could blow up the fuse and possibly get electrocuted!

Most dual fuel range cookers sold in the UK require hard-wired and cannot be plugged directly into an outlet on the wall. They are usually connected using a separate cooker circuit that is only suitable for appliances with a maximum of 20 amps.

You can test the ring circuit in your home by looking at the fuse box, or by speaking to an electrician in your area. You can ask them if the sockets are connected to the same ring or if they're separate. They should also be able tell you if there is an individual circuit that powers your oven.

If you're considering buying a new dual-fuel range cooker, the size of your kitchen is an important factor to take into account. We have a large range of cookers that will fit any space, from compact 50 - 60cm dual fuel models and vast 90cm + double oven models from the top brands such as Rangemaster and StovesAreUs.

If you're looking for something different Don't worry, we also have a wide selection of electric and gas multifunction cookers. These multifunction cookers allow you to cook a variety of meals, including casseroles, pasta, and curries.

Explore our full range of Cookers in Currys online or head in-store to browse. We offer free installation at home and delivery on certain range cookers as well as flexible payments options. Our team is available to answer any questions you may have. Contact us via email or phone. Credit is subject to status and terms and conditions apply.

What is the maximum current draw of a cooker switch?


There is a lot confusion regarding the maximum current draw of a cooker switch. The truth is that most cookers aren't made to connect to the standard socket, but instead are wired hard and fed into an oven ring circuit. This is because they often consume far more than 20 amps of power each time the gas and electric ovens are being used.

You will not find dual fuel range cookers that can be installed in a standard socket since this could pose an extremely high risk of fire and infringe electrical regulations. A professional electrician should always install new electrical circuits in the kitchen, connecting them to a cooker. They will also make sure that the total load of the oven and the hob does not exceed the circuit's capacity.

The benefits of a dual fuel range cooker include the responsive heating of a gas cooktop along with the precision of an electric oven. They are therefore popular with both chefs and home cooks. If you want to try different cooking techniques, such as searing and charring, a dual fuel range cooker is the best option.

When range cookers dual fuel are looking to purchase a new range cooker, you'll need to take into consideration various aspects such as size, functionality and cost. In addition, you will also need to make sure that your home is equipped with the right gas hook-up for the appliance. If you are unsure, it is best to book an appointment with a Gas Safe engineer to inspect your property before installation.

The Currys range of dual fuel range cookers includes options that can be adapted to a range of budgets, from basic models from Indesit and Zanussi to our own exclusive Essentials collection. If you are seeking something more sophisticated, we stock a variety of top JennAir models that feature many new features.

When purchasing a new dual fuel range cooker, it's essential to read the owner's manual for specific information on the electrical and gas requirements. You will require a gas connection in your home. A plumber might be required to set it up for you. You might also require an individual cooker-ring circuit installed by a certified electrical engineer.