How to Install a Ghost Immobiliser

Ghost immobilisers can be a powerful deterrent to thieves of cars. By combining this device with other security systems and remaining vigilant, you can put together a robust defense against the latest, technologically advanced thieves.


A ghost immobiliser can protect your vehicle from hotwiring, key cloning, and relay car theft by the needing a pin number to start the engine. It works by using buttons on your steering wheel or centre console, which makes it unnoticeable to criminals.

Identifying the Wires

With more and more vehicles being stolen with no owner's key, it is vital to safeguard your vehicle. While thieves might be able to copy your key fob, or even steal the vehicle's system by hacking it, a ghost immobiliser adds an extra layer of security by blocking all signals from the key fob, making it impossible to start your car without entering a PIN code.

While you could install a ghost immobiliser yourself, it is best to hire an expert technician complete the job for you. A professional technician will know the best place to install the device and how to connect it to your vehicle's wiring. Installation can be complex and it is essential that all connections are done properly to avoid damage or malfunctions.

Wearing safety equipment and working in an area that is well-lit will help you get the most effective results. It is also recommended to go through the user's manual to become familiar with the wiring system. This will allow you to identify the wires that are required for installation and make sure you have the right equipment and parts.

Once the wiring is connected, you can reconnect your battery and determine if the system is working properly. To prevent electrical problems be sure that the battery terminals are secure. Additionally, you should label the CAN H and CAN L wires using labels or tape to keep the track of them during the installation process.

If you wish to permit someone else to drive your vehicle for a short period of time for valet parking or when the vehicle is being used for service, the Ghost Immobiliser can be put into Transport Mode. This allows you to input the code using a service button located on the steering wheel, center console, or door panels, and it will then enter PIN code change mode.

Some thieves try to circumvent the ghost immobiliser using spoofing or jamming devices to block or send fake signals to the system. This can be avoided by investing in modern anti-jamming technology and regularly monitoring your Ghost Immobiliser for indications of tampering.

Disconnecting the Battery

The ghost immobiliser is a cutting edge security device, is designed to prevent car theft. It makes use of cutting-edge technology to monitor and disable the engine when the correct PIN code is entered, thus stopping the vehicle from being taken away by thieves. The system is extremely efficient and discreet. It doesn't have any visible indicators to discourage criminals. You may have to take away your unit to perform maintenance, upgrades, or even when you sell your vehicle.

This process requires special tools and expertise since you'll be working with wires, and bypassing certain factory parts. Moreover, it is essential to follow the step-by-step instructions provided by the manufacturer of the ghost immobiliser. It is recommended to seek out an expert mechanic or auto electrician particularly if you're not familiar with working on cars.

After identifying the wires and disconnection it is crucial to verify the condition of your battery. Check that it's clean and free of corrosion and that the connections are secure. If necessary, think about replacing the battery to ensure it is sturdy enough to handle the electrical demands of an aftermarket security system.

After you have disconnected the wires, you can remove the ghost immobiliser. Use strippers or wire cutters to carefully disconnect the wires, making sure not to damage the wires or their terminals. Make sure to label each wire so that you can reconnect them properly in the future. If the wires were joined and you want to use a heat resistant tool to break the connection. It is also important to cover the cut wires with insulation tape or heat shrink tubing to keep them from short circuiting.

Reconnect the wires using the 12V constant power source. If necessary you can use a fuse tap to ensure that the connections are protected by fuse. Lastly, connect the grounding wire to a solid grounding point on the vehicle's chassis.

Once you have reconnected the wires, turn off your vehicle and enter your PIN. Then, restart the engine. If the engine doesn't start, then you have successfully removed the ghost immobiliser.

Making the Connections

A ghost immobiliser is an affordable way to increase the safety and security in your vehicle. It is connected to the CAN bus system of your vehicle, capturing signals, and stopping the vehicle from starting until the correct PIN code is entered. This device is virtually impossible to disable. It's a great choice for drivers who want extra peace of mind and security. It can lower the cost of insurance when used in conjunction with a Thatcham Approved Tracking System.

Obtaining and reviewing the wiring diagram for your vehicle model will be essential in the installation process. The diagram serves as a reference guide for locating the necessary wires to create precise connections. The connection will last and secure if you choose the proper wiring connectors or the proper soldering technique.

The wires that connect the Ghost immobiliser to the CAN bus must be correctly identified and connected. It is a good idea to use small pieces of tape or labels to identify the CAN H and CAN L wires, as this will prevent confusion during the installation process. The position of the wires will vary in every vehicle, so it is essential to refer to the wiring diagram for your vehicle as well as online resources to identify them.

After the correct cables are connected, power can be restored to the Ghost immobiliser. It is recommended to test the immobiliser by starting the engine without entering the PIN code. This will confirm that the immobiliser is installed correctly and is functioning exactly as it was intended to. It is a good idea to test your immobiliser frequently to help to identify any issues or problems early on.

The ghost immobiliser can be installed quickly and without modifying the wiring in your vehicle. It's also a great choice for those who wish to add extra security to their vehicles, since it can be utilized together with a Thatcham-approved alarm or tracker, which will notify your phone or tablet when the vehicle is being damaged.

Mounting the Unit

The Ghost immobiliser works well as a deterrent to car thieves especially when paired with a GPS tracking device. The device makes use of buttons on the centre console, doors and steering wheel to create a unique sequence that you can only recognise. This prevents your vehicle from beginning. It is also tamper-proof and weatherproof. It also comes with a three-year guarantee and is recommended by a range of insurance companies.

When installing ghost 2 immobiliser near me is essential to follow the steps carefully. If you are unsure, it is best to consult an expert. A wire stripper and multimeter are crucial tools for identifying the wiring and making precise connections. It's also an excellent idea to buy some insulation and electrical tape to help in protecting the connections from potential damage. After the installation is complete, it's a good idea to check the device to confirm that it's functioning as intended.

Ghost immobilisers are a great option to protect your vehicle, especially in areas that have high rates of crime. It can be linked with an iPhone application for easy management and monitoring. It stops key cloning as well as ECU swapping and other security threats. It's popular among car owners who want to secure their investment.

The Ghost II immobiliser features a sleek design and a low-profile that makes it difficult to spot for thieves. It connects to the CAN (Controller Area Network) system in your vehicle and blocks the engine from being started unless a PIN code is entered. The PIN code is generated by a unique sequence of keys on the steering wheel and centre console, as well as the doors and can be changed at anytime. The device is also tamper-proof and comes with a GPS tracking system that will assist police in locating your car in case of theft. It's a great choice to safeguard your car from thiefs and it's fully Thatcham-approved.