Ghost Immobiliser Fitting

Secure your vehicle from key theft, cloning, and hacking with the first aftermarket CAN-Immobiliser. go to the website Links to an external site. and GPS tracking can be connected to the immobiliser to give you alerts when your vehicle is taken or damaged.

The installation of the Ghost immobiliser is done by a trained technician. Making use of the correct tools, insulation tape, and heat shrink tubing are essential.

Getting Started

Unlike physical theft protection devices like wheel locks and car alarms, ghost immobilisers guard your vehicle without the use of LED indications or key fobs. They are connected directly to the ECU CAN data network, and are activated only after entering a PIN code. This provides a higher level of security against key hacking, ECU swapping and cloning.

Installing a ghost immobiliser Birmingham requires a high degree of agility and accuracy. It's like tiptoeing through an icy minefield. One mistake can cause serious damage to the circuits of your vehicle's electrical system. It is essential to comprehend the procedure for installing and prepare your vehicle in a timely manner.

It is necessary to remove interior panels from the vehicle to make space for your immobiliser. Once you have found the perfect location to conceal it then use cable tie to ensure it is secured. Then, tidy up the wiring by tying loose wires, and then using insulation tape or heat shrink tubing to cover the exposed connections. This reduces the chance of a short circuit that is not intended to happen while also improving the appearance and reducing the chances of theft.

Identify a constant source of 12V power and a grounding for the ghost immobiliser. Once you've located these, test the power wires using a multimeter to ensure they are delivering a consistent voltage. Finally, connect the CAN H and L wires from the immobiliser to the identified power source and grounding point.

It is crucial to double-check all the connections and inspect the immobiliser to look for signs of corrosion. Entering a PIN and starting the car is a good way to test the system. This should be part of your daily routine, as it will allow you to spot any issues that may arise early. Regular testing can help increase the longevity of your device and keep it running at its peak.

Preparing your vehicle

The installation of the Ghost immobiliser is a complicated task that requires the right tools and knowledge. A wiring diagram is necessary for locating the correct wires, establishing precise connections and ensuring security. A multimeter is a tool to test electrical values and guarantee security. Insulation tape and cable ties can be used to protect connections from being tampered with and to ensure they are secured. Additionally, a user's guide will provide specific directions tailored to the Ghost Immobiliser model you have.

Once installed, a ghost immobiliser is able to prevent unauthorised engine start by requiring the driver to input a unique PIN code sequence through existing buttons in the steering wheel or center console. This can be accomplished manually or remotely through a mobile phone app, and the code can easily be modified by the vehicle's owner at any time. The device is also quiet and unnoticeable by thieves since it doesn't emit radio frequencies.


A ghost immobiliser is connected to the CAN bus of the vehicle, a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals from the ECUs and stops the engine from running if the ECU detects a false signal. The system is tamper-proof as well as weatherproof, and does not include key fobs or LED indicators to draw the attention of thieves.

It can be placed behind the dashboard or in an inconspicuous area, so it is not visible to thieves and doesn't hinder the performance of the vehicle. It can be placed in a small container, so it is less likely to be observed by fraudulent salespeople when they test drive.

Its stealthy operation, combined with its integration into the CAN-bus system of the vehicle, is a powerful deterrent to modern vehicle theft techniques like signal relay attacks and key copying. Combining the system with other security measures will create a powerful barrier to frustrate even the most persistent thieves. This is why more insurance companies are now recommending or even requiring ghost immobilisers be fitted, as it can significantly reduce monthly premiums.

Making the Connections

Ghost immobilisers are silent unlike traditional security systems that can be heard by thieves. They stop thieves from knowing that your car is running. They also prevent high-tech methods of stealing vehicles, such as OBD hacking. They can also be installed without causing permanent marks in your car making them a good choice for people who plan to sell their vehicle in the near future.

The Autowatch Ghost 2 is a immobiliser for CANbus that is one of the most reliable and advanced solutions to prevent car theft. It uses the CAN data network to shut down your engine and generates a PIN code that only you know, meaning it's difficult for criminals to recognize. It can be installed in many vehicles and integrates with a number of available features, including car alarms, GPS trackers, steering wheel locks, and door bypass systems for locks.

If you decide to opt for an Ghost immobiliser, be sure to refer to the wiring diagram for your particular vehicle model to identify the wires to connect. Make sure to double-check the location of these wires to ensure accuracy and mark them using tape or labels to aid in keeping track of them. You will also have to locate a reliable power source (12V) for the system as well as the grounding. Once you have all the required components, you can start connecting them to complete the installation.

If the ghost immobiliser is connected to the CAN bus, it will stop your vehicle from starting unless you enter a pin number using the buttons on the steering wheel or dashboard. This will stop ECU cloning as well as other methods of vehicle theft. In addition, it could be paired with other approved by Thatcham security devices, like alarms and tyre clamps, to give your vehicle an even greater degree of security.

As the UK automotive industry continues to grow so do the options available for securing your vehicle. With so many avenues for thieves to break in and take your car it's essential to take every precaution to protect it from being stolen. Ghost immobilisers are a popular choice among car owners who are accountable.

Testing the System

The Ghost Immobiliser communicates with the vehicle's ECU via a CAN network. This stops the engine from starting until the PIN code has been entered. This makes it extremely difficult for thieves to steal your key fob and then start your car, and more difficult to disable the system by hacking into its electronic components.

Ghost Immobilisers are also able to be used together with GPS tracking devices that can assist you in tracking your vehicle and locate it in the event of theft. This isn't an option that is commonly used in aftermarket security solutions however it's an excellent method to enhance your security and get peace of mind knowing that your vehicle is always protected.

In addition to providing increased security, the Ghost-II immobiliser also provides a comfortable user experience by eliminating the requirement for additional key fobs and devices. It is simple and easy PIN code entry that can be integrated seamlessly into your daily routine. Additionally, it provides modes of deactivation and other features that allow you to temporarily disable the immobiliser for valet parking and servicing.

Get the tools you require and get familiar with the wiring of your vehicle. A basic set of hand tools will give you the ability to create precise connections, and a multimeter is a great tool to check electrical values. Insulation tape and heat-shrink tubing are vital to shield connections from short circuits. Cable ties can be used to secure wiring. It is also essential to be in a well-lit space and wear safety gear when working with electrical tools and components.

After you've completed the installation you should test the Ghost immobiliser to make sure that it's working properly. Try to start the vehicle without entering the PIN. If this doesn't work, you will need to try again and check the connections more thoroughly.

The Ghost Immobiliser, unlike other security systems is a covert device which cannot be identified by thieves. It is also more efficient than physical deterrents, such as wheel clamps and steering locks. It is TASSA-approved and recognized by some insurance companies. This makes it a cost effective investment that will give you the peace of mind you deserve.