Autowatch Ghost Immobiliser Installation

The Ghost is the UK’s most advanced aftermarket immobiliser that works with CAN buses. It's discreet It does not include LED indicators or key fobs and is hidden within the wiring of the vehicle.

The user can also deactivate the system for a short period of time by using Transport Mode when renting their car. This guide will guide you through the installation of the Ghost immobiliser.


Professional Installation

The Autowatch Ghost immobiliser is a cutting-edge security device that protects your vehicle against hacking, key cloning, and relay attacks. The system is linked directly to the ECU of your car and protected by a pin code you set. It is inaccessible to thieves using diagnostic scanners or other advanced methods. It isn't able to be disabled by cutting circuits.

The system is easy to use, however professional installation is recommended to ensure a smooth connection to the ECU of your vehicle. Installers approved by Thatcham can assist with the installation and programming of your Ghost system. They can also suggest an alarm or tracking system to complete the protection package for your vehicle.

First, ghost immobiliser birmingham must disconnect the battery to prevent accidental airbag deployment or short circuits. When the battery is disconnected, the installer may safely begin working. Basic hand tools are useful to make precise connections, while a multimeter can be used to check electrical values and ensure safety. Cable ties and insulation tape are also necessary for securing connections and keeping wiring tidy. The Ghost Immobiliser user's manual will give specific instructions that are tailored to your model.

During the installation, it is essential to choose the right grounding location that is free of paint and debris. The installer should also make sure the immobiliser's CAN H and CAN L wires are connected to the appropriate ports on your vehicle's ECU. Based on the model, these wires may require soldering or plugged in. To ensure a stable and long-lasting connection it is recommended you use a high-quality plug.

Transport Mode can be activated by the customer once the installation is completed. This allows mechanics or valet parking to use the vehicle without knowing the pin code. To do this, the customer has to press the button for service on the dashboard five times within 2 seconds. The system will confirm this by showing 5 indicators.

The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's an excellent choice for those who rent their vehicles regularly through platforms like Turo. Immobilisers can also reduce insurance premiums, since it reduces the likelihood of theft.

Getting Started

You can't go far wrong using an autowatch immobiliser for those who want to safeguard your car from thieves. It will stop your car from being started even when a criminal steals or copies the key. This is due to its high-tech technology, which is designed to stop the engine from starting without the correct PIN code is entered.

The device connects to the vehicle's bus network CAN and allows direct communication with the ECU. It makes use of the buttons on your steering wheel and dashboard to create a unique sequence which only you know. This makes it impossible for anyone else to start your vehicle. This is the best security system that protects your pride and joy, keeping its value intact in the event that you decide to sell it in the future.

Installing a ghost ignition is an easy procedure, but it is important to follow the steps carefully to avoid issues with electricity and system malfunctions. You'll need to locate a power supply of 12V and a solid grounding on the chassis of your car. Then, you can start connecting the wires to the immobiliser. Make sure you use top-quality connectors and soldering methods to ensure a strong connection. Also, be sure to cover the connections with heat shrink tubing or insulation tape to protect them from short circuits in electrical power and other problems.

Once the wires are connected, you are able to connect the battery and start the engine to test whether the immobiliser works. Once you have verified that everything is working correctly, you can install the immobiliser in a secure location in the vehicle. Be sure to conceal it well so that a thief cannot tamper with it.

The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified this means it is in compliance with the highest standards of security and is a great protection against car thieves. It offers superior protection against key cloning, hacking and relay attacks, and isn't able to be disabled unless you know the code. The device is simple to use and can be set into a service valet setting so that your vehicle won't be activated when you take it for an MOT or service.

Wiring

The Ghost Immobiliser is a cutting-edge security system that is specifically designed to deter theft of vehicles. It communicates with your vehicle's ECU and connects directly to the CAN bus. In contrast to other aftermarket systems that require the removal of circuit components The Ghost Immobiliser does not interfere with any of your vehicle's factory settings.

The system is also inaccessible by thieves using diagnostic scanning tools. The system doesn't transmit or receive radio frequency signals and instead uses CAN data to communication with your ECU. Furthermore, it doesn't require any modifications to your vehicle's existing key fobs.

Enter the sequence to disarm (either two or one button) and then turn on the ignition of your car to activate the Ghost Immobiliser. The indicator will flash two times to confirm that you have entered the correct code. After that, you are able to start your vehicle and drive off in peace.

Once installed Once installed, the Ghost Immobiliser will protect your car from key cloning and hacking while preserving the value of your most prized possession. In Transport Mode you can temporarily disable the Ghost Immobiliser if you need to hand your car over for service or valet park.

You'll need a constant power source (12V) and an earthing point to complete the installation of a Ghost immobiliser. Make sure that both are well-insulated and able to be touched. It is also recommended to use cable ties to tie and secure the wires, as this will decrease the chance of tampering by potential thieves. Make sure you verify the locations of these points to avoid committing a mistake and mark them with a piece of tape or label. It's recommended to examine all connections for signs of wear and tear. Connectors that are loose could cause malfunctions in the system, so make certain that they are securely in place and properly insulated. Make sure to test your Ghost Immobiliser after the installation is completed. This will confirm that the unit is working correctly and that all connections and insulation are secure. If there are any issues, be sure to resolve them immediately.

Testing

The Autowatch Ghost immobiliser is a revolutionary vehicle security system that works seamlessly with your car's ECU to stop unauthorised motor starting. The innovative technology protects your vehicle against hacking and key cloning as well as other common methods employed by thieves to steal cars. The Ghost is also able to work in conjunction with other alarm and tracking systems to provide the best protection for your vehicle. The Ghost's unique features, paired with its subtle design makes it a sought-after option for both car enthusiasts and security conscious drivers.

In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, it is essential to follow all steps of the installation procedure. A good starting point is to look over the wiring diagram of your vehicle that serves as a roadmap for locating and connecting the wires required. After that, you'll need identify the power source as well as grounding points. Once you have located them, you'll need to mark the points so that they are easy to locate when installing. Finally, it's important to use top-quality tools and materials. Basic hand tools can aid in making precise connections. A multimeter will verify electrical values, and ensure safety. Insulation tape and cable ties will keep the connections neat and tidy. A Ghost-specific user manual is also available.

Before you begin installing, it's important to test the system by entering the PIN code and then starting the vehicle. This will ensure that the immobiliser works as intended and stop unauthorised vehicle starts. This procedure should be carried out regularly as part of your routine inspections of your vehicle to ensure that the system is always functioning properly.

After the installation is completed, you can begin driving your vehicle with confidence. The Ghost will protect your car from potential car thieves. It will ensure that no one can drive away with your vehicle without having the correct PIN code. The Ghost can be paired with an approved Thatcham tracker that identifies any attempts at theft or tampering. This will allow you to locate your car if it's stolen.

The Ghost can be utilized in a variety of vehicles and is compatible with all major manufacturers. Monty's Locksmith can assist you in securing your vehicle with this innovative device. Contact us today to learn more about our services and installation options. We are a TASSA Registered installer This certification ensures that we follow strict guidelines and procedures for installing our products. similar webpage assures insurance companies, customers and law enforcement agencies that installations are done safely and in a correct manner.