Why You Should Trust Your Double Glazing Repairs to Local Experts

It is not possible to replace double glazing on your own, but a professional glass installer can make the job easy and secure. You should also contact the company that sold it to see whether they still have a warranty.

Drilling holes into windows that are misted will allow the condensation to escape but it's only a short-term fix. Blown double glazing must be replaced in order to improve thermal efficiency.

Broken window panes

If a window is damaged, it leaves gaps in the double glazing which can cause draughts or moisture. These aren't only inconvenient however, they can also harm your property and health. In fact damp environments can cause damaged frames and other structural issues that can be expensive to repair.

A broken window is usually simple to repair if you are aware of the right procedure. First, take the necessary precautions to avoid injury such as wearing gloves and eye protection. Remove the old glass fragments. Once you have removed the shards, employ a utility knife to cut through any glazing putty or metal glazing points. Once the glass has been removed from the frame, remove it carefully.

After you have cleaned the area and sanded the area to remove any paint or gunk, it is time to prepare the new glass. Make sure you measure the opening from side to side and from top to bottom and subtract 1/8 inch from both measurements to accommodate any expansion or contraction of the frame over the years. This will ensure that the glass you are replacing is installed correctly.

Next, apply a cord of glaziers compound to the outer edge of your glass-frame joint. Smooth it out using a putty blade, matching the colour of the frame. Once the compound has dried and dried, you can paint it and the new pane with the same color as the rest of your window.

In order to stop the crack from spreading, score an arc of a tiny size with your utility knife, just beyond the crack. This will reduce the crack and prevent it from spreading, saving your window without the need to replace it.

It can be a challenge to make repairs yourself without the proper tools. It's safer and simpler to find a company that specializes in local double glazing repairs. This will help you save time and money, and ensure that your double glazing is repaired to the highest quality.

Broken seals

A broken seal can cause your windows to lose their insulating properties, leading to drafts and higher energy bills. It also allows humidity and moisture to seep into the space between your window panes, causing condensation and fogging. Foggy windows can be difficult to endure and the issue will only get worse when it is not dealt with.

You can stop the window seals from breaking by having your windows professionally installed, and avoiding cleaning your windows with power. Even if your windows appear good, you should have the seals replaced as soon as possible when you notice signs that the seal has broken like condensation on the glass or an increase in your energy bills.

Double Glazing Door Repairs are constructed of flexible materials that can be damaged over time. This issue is more frequent in older windows, and also those that have been exposed excessively to sunlight. Window seals may also fail due to problems with installation, such as gaps and uneven frames.

While it is possible to repair a broken seal on your windows yourself however, the process could be complicated and can damage other components like argon inside the window. It is recommended to contact a professional to inspect your windows and repair any worn or damaged seals.

Once the window seal is replaced, your double-glazed will perform just as it should, securing your home from heat loss and cold air infiltration. This will save you money on your heating and cooling bills while keeping your home at a comfortable temperature.

In most cases, fixing the window seal that is damaged requires taking the window out of its sash and then removing the old sealant. When the window is clean and ready to be put back in, it will be refilled with argon gas before being sealed again. It is possible to complete the job yourself, but it is recommended to call a professional to ensure it is done safely and correctly.

Broken door handles

The handle on the front door of your home is an important part of your security. It opens the door and connects to a latch that is placed in the slot of the door frame to keep it shut. If the handle on your door appears to be loose, it may cause problems opening the door. It could be a sign that there are issues with the locking mechanism as well.

It's easy to fix a loose handle on a door. In most cases you can tighten the screw that holds it in place. If the issue is more serious, you may have to replace the handle.

To begin, you need to wedge your door open with a door wedge or stop so that it won't close while you work on the handle or knob. This will keep it from damaging the paint and also let you access all parts of the handle or doorknob without worrying about the latch being engaged.

The next step is to take off the coverplate that is positioned over the door handle. It may appear like a circular or rectangular piece of plastic designed to hide the screws for a cleaner appearance. Some may have a small slot or detent that you can use a flathead screwdriver to press down to release it. Then, you'll have to pull the base of the handle off and reveal the screws which hold it in place.

The cover plate conceals most of the screws that hold your door knob or handle in place. After you've removed the cover plate, you can see each one and tighten them as needed. Be sure not to over-tighten the screws, as this can harm the knob or handle. When all screws are tight you can put the base back on, and then place the knob or handle on top to line up with the screw holes (if there are visible ones) or the detent hole. Once you're finished check the handle to confirm that it's functioning properly.

Chips and scratches

Sometimes, even the most well-maintained double glazing can become damaged. It can only take just a few smacks from stray footballs or a sudden gust of wind to cause chips, cracks and dents. These can alter the performance of your doors and windows which then need to be replaced with new ones. It is important to recognise the indications of damage and inform your installer as quickly as possible, at least in writing. You can help by providing information about the issue and pictures, if applicable.


It is possible to repair scratches or chips without a lot of effort, based on their severity. If a scratch is deep enough to feel your fingernail it is best to call in a glazier. They can use glass polish and elbow grease to eliminate the scratch. They can also give you some maintenance tips to keep your doors and windows in good condition.

Also, you should look out for signs that the gas cavity between the window panes has developed an air leak. If you notice condensation between window panes, this could mean that the inert gasses have evaporated and warm, indoor air is now entering your home. If you spot this issue it is essential to communicate with your installer immediately because this could be covered under your warranty.

If your double-glazed windows are covered by guarantee and you are eligible to claim back any repair expenses. You could also consider switching to a different installer who can be trusted to deliver high-quality products and excellent customer service. Look up online reviews, verify the BBB or ask for references from previous customers to make sure you choose a reliable and reputable firm. It is also important to inquire about certifications from major manufacturers and the Fenestration and Glazing Industry Alliance. This will help you avoid companies that are not authorized to install double glazing.