Autowatch Ghost Immobiliser Installation

The Ghost is the most advanced aftermarket in the UK. immobiliser for CAN bus. It is discrete and does not have LED indicators or key fobs and is concealed in the vehicle's wiring.

The user can also deactivate the system temporarily using Transport Mode when renting out their vehicle. This guide will guide you through the process of installing the Ghost immobiliser.

Professional Installation

The Autowatch Ghost immobiliser protects your vehicle from key cloning attacks, hacking attacks and relay attacks. The system links directly to your vehicle's ECU and is protected by a unique pin code that you can choose. It is not detected by thieves using diagnostic scanners or other modern methods. It cannot be disabled using circuit cuts.

The system is simple to use, however it is essential to have a professional installation to ensure a secure and secure connection to your vehicle's ECU. A certified installer from Thatcham can assist with the installation and programming of your Ghost system. click the following document can also recommend a tracking or alarm system to complete the protection package for your vehicle.

First, the installer needs to disconnect the battery to prevent accidental airbag deployment or short circuits. When the battery is disconnected, the installer may start working safely. Basic hand tools are useful to make precise connections and a multimeter can be used to check the electrical properties and safety. Insulation tape and cable tie are essential to protect connections and keep wiring tidy. In addition, the user's manual gives specific guidelines that are specific to your Ghost Immobiliser model.

During the installation, it is crucial to select an area for grounding that is free of debris and paint. The installer should ensure that the immobiliser's CAN H and CAN L wires are connected to the correct ports on the vehicle's ECU. Based on the model, these wires may need to be soldered or plugged into. To ensure a reliable and durable connection it is recommended that you use a high-quality plug.

Once the install is complete After the installation is complete, the customer can turn on Transport Mode. This allows mechanics or valet parking to use the vehicle without knowing the pin code. To accomplish this, the customer has to hit the service button on the dashboard five times within 2 seconds. Once this is done the system will verify with 5 indication signals.

The Autowatch Ghost 2 immobiliser is TASSA approved and a highly efficient immobiliser. It's a great option for those who rent their vehicles regularly on platforms such as Turo. An immobiliser can reduce the cost of insurance, as it decreases the likelihood of theft.

Getting Started

If you are looking for a solution to secure your vehicle from thieves it is best to go with an autowatch ghost immobiliser. It prevents your car from starting even when someone copies or steals your key. This is due to its sophisticated technology, which is designed to prevent the engine from starting without the correct PIN code is entered.

The device connects to the CAN bus network of your vehicle, allowing it to communicate with the ECU directly. It uses the buttons on your dashboard and steering wheel to create a unique sequence that only you can understand. This makes it impossible for anyone else to start your car. This is the best way to protect your pride and joy. It will ensure that your car's value remains intact in the event that you decide to sell it.

Installing a ghost immobiliser is a simple process, but it's important to follow the instructions carefully to avoid issues with electricity and system malfunctions. First, you must locate and determine a constant 12V power source as well as an adequate grounding point on the chassis of your vehicle. Then, you'll be able to begin connecting the wires to the immobiliser. Use high-quality connectors and soldering methods to create a solid connection. Make sure to shield the connections with heat shrink tubing, insulation tape or other materials to prevent short circuits in electrical power.

Once the wires are connected, you can connect the battery and start the engine to test the function of the immobiliser. Once everything is working properly then you can put it in a safe location under the dash or elsewhere in the vehicle. Be sure to hide it securely to ensure that thieves cannot get it into a compromising position.

The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified this means it complies with the highest standards of security and is an excellent deterrent to car thieves. It offers superior protection against key cloning, hacking and relay attacks, and it can't be disabled without knowing the code. The device is also easy to use and can be set into a service valet mode so that your vehicle will not be activated when you bring it in for service or an MOT.

Wiring

The Ghost Immobiliser is a cutting-edge security system that's designed to prevent vehicle theft. It is directly connected to the car's CAN bus network and communicates with the ECU which makes it virtually undetectable as an addition to your vehicle. In ghost vehicle immobiliser to other aftermarket systems that require the removal of circuit components, the Ghost Immobiliser doesn't interfere with any of the factory settings for your vehicle.

It's also totally undetectable by thieves using diagnostic scanning devices. The system doesn't transmit or receive radio frequency signals, but instead uses CAN data to communication with your ECU. It doesn't even require any modifications to your current key fobs.

Enter your sequence for disarming (either two or one buttons) and turn on the ignition of your vehicle to activate the Ghost Immobiliser. The indicator will flash two times to verify that you have entered the correct code. You can now start your vehicle and drive in a safe manner.

Once installed The Ghost Immobiliser can secure your vehicle from key cloning and hacking while preserving the value of your pride and joy. If you ever have to surrender your vehicle for service or valet parking The Ghost Immobiliser will be temporarily disabled in Transport Mode.

To complete the Ghost Immobiliser installation, you'll need to locate an energy source that is constant (12V) and an earthing point. Be sure that both are well-insulated and can be touched. It's also recommended to use cable tie to secure and bundle the wires, since this reduces the risk of being tampered with by thieves. To avoid making mistakes, double-check these points and mark them with labels or tape. It's also a good idea to examine all connections for signs of wear and tear. Make sure all connections are firmly in place, and properly sealed. Also, don't forget test the Ghost Immobiliser after installation is completed. This will make sure that the unit functions properly and that all connections and insulation are safe. Be sure to fix any issues immediately.

Testing


The Autowatch Ghost Immobiliser is an innovative vehicle security system that integrates seamlessly into your vehicle's ECU to stop the engine from starting without authorization. The innovative technology protects your vehicle from hacking and key cloning as well as other methods commonly used by thieves to steal vehicles. The Ghost also works in tandem with other alarm and tracking systems to give the ultimate vehicle protection. The Ghost's unique features, paired with its subtle design makes it a preferred choice for car enthusiasts and security conscious drivers.

It is important to follow the steps of installation to ensure the complete integration of the Ghost Immobiliser. The best place to start is to consult the wiring diagram of your vehicle that serves as a guideline to locate and connecting the required wires. The next step is to determine the power source and grounding points. Once these are found you'll need to mark them so that they're easily identifiable during the installation process. In addition, it is essential to use high-quality tools and materials. Basic hand tools can help to make precise connections while a multimeter can check electrical values and ensure security. Cable tie and insulation tape will keep all connections neat. Also, a user's guide will provide specific guidance tailored to your Ghost model.

It is essential to test the system before installing it. Enter the PIN code into the system and start the vehicle. This step will confirm that the immobiliser functions according to plan, and prevents unauthorised vehicle start-ups. It is recommended that you perform this step regularly as part of your regular vehicle inspections to ensure that the system is operating correctly.

Once the installation is complete Once the installation is complete, you can drive your car with confidence. The Ghost will guard your vehicle from would-be car thieves. It will ensure that no one can take your car away even if they don't have the correct PIN code. The Ghost can be linked to an approved Thatcham tracker, which detects attempts to steal or tamper with. This allows you to locate your car if it's stolen.

The Ghost is compatible with a wide variety of automobiles, including those from all major manufacturers. Monty's Locksmith can help you secure your vehicle with this cutting edge device. Contact us today to find out more about our services and installation options. We are a TASSA Registered installer which guarantees that we follow strict standards and procedures for installing our products. This assures customers insurance companies, customers, and law enforcement agencies that all installations are carried out safely and in a safe manner.