How to Install a Ghost Immobiliser

A ghost immobiliser is a hidden security system that shields your car from hacking and key cloning. It works by stopping the engine from starting until a PIN code is entered. This can be as long as 20 characters.

This extra layer of protection is not detectable by thieves who might not be aware of it. Some systems also have an application that allows owners to disable the immobiliser in the event that they forget their PIN code, or to use a service/valet mode.

Connecting the vehicle's CAN Bus to the vehicle's

The Ghost 2 Immobiliser is a cutting-edge security system, is able to be integrated directly into the ECU of your vehicle. It provides a discreet security barrier against thieves. It is highly effective and user-friendly and is a great option to add to your vehicle's security arsenal. Like all anti-theft devices it's not foolproof, and requires regular maintenance in order to function effectively. Luckily, this guide will help you get the most out of the Ghost 2 Immobiliser.

CAN (Controller Area Network) is a robust serial network that allows microcontrollers to communicate with one another over short distances without the need for central control units. It is designed to multiplex electrical wiring in vehicles, which saves on copper. It offers many advantages including low cost and easy use.

The CAN protocol is utilized in the majority of modern automobiles to connect with the engine management system, steering control module and air conditioning controls and many more. It also carries sensor data like inputs and speed sensors, to control the various functions of the car. The CAN bus is able to monitor the status of these different components. It can prevent the vehicle from starting if it's in danger of failure.

While the CAN bus can be employed for a variety reasons, it's essential to know how it functions and how it's secured. It is possible to add additional features to vehicles using CAN bus, however it's important to secure it against attacks from hackers and other dangers. The best method to accomplish this is to install a firewall and monitoring your CAN bus through software.

Ghost2' ghost immobiliser car is hidden inside the car's wiring harness or dashboard, which eliminates the possibility of a burglar physically altering it. It is also impossible to reset the PIN code or emergency code without access to the vehicle.

You can turn on Transport Mode If you need to give your vehicle away for valet parking, service or any other reason. This feature will disable both the keyfob and the ignition functions of the Ghost immobiliser. It will only be activated after the car has reached 31 mph over a period of 15 minutes.

Creating PIN codes

The Ghost immobiliser protects your car from theft. The innovative technology uses the PIN to shut down the engine of the vehicle and stop it starting without the correct code, or a valid fob/mobile. The system's sleek design makes it virtually invisible and also provides unbeatable protection against theft. Furthermore, the system is TASSA verified and can lead to significant savings on insurance premiums for cars.

During the installation during installation, the Ghost system goes into the learning mode to record the sequence of buttons that are pressed to create your unique pin code. Once the pin code has been created, the installer will then guide you through the steps to activate the system. Once activated the Ghost system shuts down your vehicle's starting motor until you enter a valid pin or switch the vehicle to transport mode. This makes it extremely difficult for thieves to clone or hack your vehicle's starting system.

It is simple to install an easy-to-install Ghost immobiliser, but you must follow the specific instructions provided in the user's manual to ensure the proper operation. Basic hand tools can assist in making the perfect connections and a multimeter can assist in determining the electrical value. Insulation tape and heat shrink tubing are a great way to protect the exposed wiring and cable tie is essential to keep everything neat and secure. Also, make sure to check the system on a regular basis to find any potential issues and errors.

It is crucial to check the system one final time prior to turning on the ignition. The Ghost immobiliser will re-arm itself after 3 to 30 seconds, based on your vehicle model. It also has an option for Service/Valet that allows you to temporarily remove the system for servicing your vehicle or parking valet.

The immobiliser can be hidden beneath the dashboard or the steering wheel. It is recommended to use a small amount of paint or duct tape to mark the CAN H and CAN L wires, so that you can easily identify them when you are testing. In addition the CAN H and CAN L wires must be connected to a power source that is able to provide constant 12V. It is also important to check the connections following testing, as misidentifying these wires could cause the system to fail.

The system must be activated

A ghost immobiliser prevents your car from starting when you press a number of buttons on the vehicle, typically on the steering wheel or door panel, or the central console. The sequence is determined by the user and can be altered if necessary. Once activated, the system cannot be deactivated. This is a fantastic option for anyone who wants to secure their vehicle against theft.

The system is designed to be undetectable, which means it isn't detected by modern diagnostic tools or code-grabbing technology. It doesn't emit radio frequencies which makes it harder for thieves to find.

If the device is identified, it will stop the engine from starting and will sound an alarm with a loud sound to scare off thieves. The device can be used to monitor the location of the vehicle and assist police locate it in the event of theft.

Contact Car Specalist Customs for a quote or to discuss your options if you're interested in Ghost immobiliser. We are fully trained to install a ghost immobiliser to your vehicle, and will make sure that it is tucked away in a hard-to-reach area. We can also provide additional security measures such as an ignition lock for your wheel and a kill switch to help protect your vehicle from thieves.

Disarming the System

If you have a Ghost immobiliser fitted to your vehicle, it's important to know how to disarm it. This will help you in the event that you lock your keys in the car or if your battery goes out of. The system uses a unique PIN code that only you know, so the immobiliser will not be able to start your vehicle unless you enter this code. The simplest method to enter the code is to press a combination of buttons on your dashboard or the steering wheel. This is much easier than using a key fob. It also keeps others from copying the remote.

Unlike some aftermarket immobilisers that require cutting wires for installation, Ghost2 is non-invasive and works with your vehicle's CAN bus network to function. Its most notable feature is its ability to bypass the engine without affecting the normal functions, making it impossible for thieves to use signal boosters to clone your car key. Moreover, it does not emit radio frequencies, which means thieves aren't able to detect the system.


The Ghost system comes with the option of a Transport Mode which allows you to temporarily disable security for certain situations such as service or transportation. This feature is ideal if you are lending your vehicle to someone else without sharing your PIN number, or if your vehicle requires to be protected even while you drive it. Press the button five times within 2 seconds to activate Transport Mode. The Ghost system will confirm activation with 5 indication signals.

When you're done, remember to save the emergency code in a secure place outside of your vehicle. If you happen to encounter a situation where you are locked out of your vehicle, call the technician or company who installed the system and they will provide you with the code. If you are unable to get in touch with them, you can call an authorized dealer. However, this may involve verification procedures, and you may be charged additional fees.

This system isn't just convenient, but it can also protect your vehicle from theft and reduce cost of insurance. Many insurance companies offer reduced monthly premiums, or even financial incentives for installing this anti-theft device.