Autowatch Ghost Installation

Autowatch Ghost is an immobiliser that guards you against key-cloning and hacking. It also stops vehicle theft. It can lower your insurance premiums and you may even be eligible for incentives.

The Ghost immobiliser, which is discreet and simple to use is built into the ECU of the vehicle. This means that it is impossible to start the engine without the secret PIN code.

TASSA Approved

If you wish to stop your vehicle from being taken with key cloning then you should purchase the TASSA certified Autowatch Ghost immobiliser system. This is the most recent in car security technology and thwarts thieves in two ways. It can stop your car from starting if your keys are duplicated, and it will stop you from driving away if they've taken your key fobs.

The Ghost is the newest generation and is connected to the CAN data network of your vehicle. A personalised PIN code can be entered by using the standard buttons on the dashboard or the steering wheel. The Ghost will then stop the engine from beginning and can be programmed to a variety of different settings such as Gear Change Blocking, Stall on Start or Lock Gearbox (vehicle dependent). It is completely undetectable as it does not utilize radio frequencies.

The Ghost is a small weatherproof device that's completely sealed. It can be installed on the dashboard or hidden inside the vehicle. This is not an Thatcham Category Approved product, but it is recognized by insurance companies as an efficient anti-theft device. It also comes with a 5 years of warranty.

The TASSA procedure ensures that any installation work on the Ghost is completed by a certified installer. This gives the customer, insurers and police confidence in the quality of any installation that is completed. It also ensures that the installers follow the product manufacturer's instructions and set up the product in a safe and correct manner. Installers who are TASSA members are committed to excellence, and they desire to make a difference in the fight against crime.

Compatible with a wide range of vehicles

The Autowatch Ghost 2 is a modern immobiliser designed to safeguard your vehicle against modern day key cloning. Its PIN code system is integrated into your car's ECU which makes it much more difficult for thieves to duplicate keys or hack into the vehicle's system. Additionally it is a discreet device and can be easily fitted in a variety of vehicles, from minivans to sports automobiles. It's also weatherproof, and small enough to be hidden away from view, making it even harder for thieves to spot.

The installation process for the Ghost is easy and does not require any additional wiring. It is compatible with a range of vehicles and relies on the CAN data network of the vehicle to communicate with the vehicle. It is also able to be deactivated or shut off from the main screen of the vehicle. The device is also compatible with a variety of mobile applications, making it simple for you to manage your vehicle's security remotely.

The Ghost could have issues following installation, despite its many advantages. These issues can be caused by a variety of reasons, such as faulty wiring or a mobile app that isn't compatible. In these instances, the best solution is to call a professional installer to resolve the issue.

Another issue that users face is the difficulty entering the Ghost's disarm sequence. This is usually due users forgetting or not practising the proper sequence. The manual for the device includes an emergency code that can be used in the event that such problems arise.


Discreet

Autowatch Ghost is an advanced and discreet security system that guards against vehicle theft. It uses the vehicle's CAN data network to function and is inaccessible to thieves, making it an extremely effective deterrent. It also has the ability to be activated by other security systems, such as car alarms, and also provides real-time alerts to the owner. These features can aid the police in finding your vehicle in the event that it is stolen.

This system can be installed in just a few minutes and is compatible with a majority of vehicles. It's an aftermarket device TASSA-approved that works with vehicle trackers and is even recognized by a number of insurance companies. It's also tamperproof and quiet, so criminals will not be able to hear the operation. The Ghost immobiliser can also be programmed to require a PIN of up to twenty numbers. This makes it almost impossible to guess the number.

Ghost is only available only in the Service/Valet Mode. This will prevent you from giving your PIN code to someone who requires access to the computer system of your vehicle, for example a mechanic. The Ghost is backed by a five-year warranty.

The Autowatch Ghost is an innovative immobiliser that is able to stop key cloning as well as ECU hacking and car theft. It's an aftermarket CAN bus device that's a fantastic alternative for older and new vehicles. It's simple to install, and it works quietly. This makes it possible to be used in any car without cutting wires. It also lets you change your pin number quickly so that only you know it. The system doesn't also use codes-grabbing or RF scanning technology which means it's virtually unnoticeable.

Easy to use

Autowatch Ghost is an innovative and efficient security system that was designed to stop vehicle theft by disabling the engine. It operates by using the personalization of a code by the vehicle owner. The code must be entered to allow the car to begin. This cutting-edge technology enhances the overall safety measures of your vehicle, making it a top option for many motorists. However, executing this installation procedure requires careful preparation and attention to detail. This involves ensuring compatibility, relying on expert advice in compliance with legal regulations, and comprehensively understanding the Ghost II's operational processes. Prioritising these factors will ensure a successful installation and optimum functionality.

Unlike conventional systems, the Ghost II is silent and is not able to be detected by thieves. It is also weatherproof and small, which makes it difficult to steal your car. It is compatible with CAN Lenastark, CAN, and other vehicles. It can even be used in vehicles where the battery needs to be isolated to ensure maintenance. The Ghost 2 has a Transport Mode that disables the device while your car is being rented out or loaned.

Before starting the Ghost 2, you will be required to enter a pin code that is unique to you. Installers will create an initial code, however it is best that you change it as soon a possible to ensure your safety. The device can enter sleep mode in order to conserve battery power, however, it will wake up when it detects an engine management signal. This feature can be disabled in the Settings menu. It is best to utilize the Ghost immobiliser only when your vehicle is in motion and to lock it whenever you leave it unattended.

Easy to install

The Autowatch Ghost II is an advanced security system that deters car theft by disabling the engine of the vehicle. It operates by using a number that is unique to the owner of the vehicle, which makes it a potent deterrent. Installing this device requires attention to detail and careful preparation. By following the law, adhering strictly to the law, and relying on the expertise of experts, you can ensure that the installation goes smoothly and you get the most benefit of this security device.

This unique CANbus immobiliser from Autowatch is easy to install, and works in a quiet manner, so that criminals are unable to hear it working. It utilizes CAN bus communication to communicate with the vehicle. It is compatible with a large range of vehicles. It is a true revolution in the field of vehicle security. It also protects your car from key cloning, hacking and theft of your car, since it will not start without the correct pin code. ghost immobiliser tracker Links to an external site. and small and therefore it is difficult for criminals to find it or alter it.

You'll need to locate the CAN High (CAN H) & CAN Low (CAN L) Wires in the wiring schematic of your vehicle before you can start installing the Ghost Immobiliser. Then connect the high wire of the CAN to the low and the CAN low to the ECU. The wires are located under the dashboard, or close to the engine.

It is recommended to employ a certified and trusted installer for the installation of your Ghost immobiliser. This way, you will be certain that the system has been installed correctly and that it won't interfere with your vehicle's functionality. Additionally the installer will be able to guide you on how to use your new device efficiently.