UPVC Door Lock Replacement

UPVC doors are a fantastic protection against burglaries. They do have their limitations, which can be overcome by installing a deadlock.

It's time to replace the barrel lock if you feel that your uPVC door lock feels loose. This simple DIY project can increase the security of your home and boost its appearance.

Removing the old lock cylinder

If you're finding that your front door is fragile when you lock it or the key struggle to turn, you might have a damaged lock cylinder. It will improve security and assure smooth operation by replacing it. The process is simple and should take around 30 minutes. You'll need an electric screwdriver. To begin, open your door and take a look at the edge of the lock cylinder. You should see an unintentional screw that is approximately in line with bottom of the cylinder. Remove it using a screwdriver, and store it safely.

You'll need to know the exact dimensions of the cylinder you have in order to find an appropriate replacement. The sizes generally range from 60mm up to 110mm. To determine the size of the lock, you will need to remove the screw from the faceplate. You can also turn the lock handle with the key while the cylinder remains in place to see how much it moves in each position.

The next step is to determine the cylinder cam's diameter and cylinder diameter. These measurements are essential to ensuring that your new lock will fit the existing door. Based on the type of uPVC door, these measurements may differ. You'll need to select one that is similar or slightly bigger than the cylinder you have.

Once you've got your measurements, it is time to remove the old door cylinder. This is a relatively easy task, but it's important to do it properly to avoid damaging the door or frame. Make sure the door is properly propped up or secured so it does not close between steps.

If you don't have the time to do it yourself, hiring a professional locksmith is a good option. They can provide expert guidance, flawless execution and peace of mind. They can also assist you to choose a safe and secure locking system. DIY can be a good option to save money as well as acquire new skills. All you need is patience and the right tools like a Phillips screwdriver. Changing your uPVC lock isn't as difficult as it appears.

Installing a new lock cylinder

It is crucial to follow the right steps and make sure you use the correct measurements when replacing a lock at your front door. This will not only help you avoid issues in the future but it will keep your home safe and permit you to use keys for both sides of the door. It is important to measure the uPVC lock's overall length as well as its backset and cylinder dimensions before replacing it. These measurements will ensure that the lock cylinder can fit inside the uPVC and operate effectively without gaps.

The first step is to take the handle from the door by loosening it using an screwdriver. Next, you need to locate the barrel screw that holds the lock in place and remove it. Next, you can remove the lock cylinder that was previously in place by inserting a key in the cylinder and turning it both to the left and the right. It is possible to remove the cylinder when the key is in one of these positions.

Installing the new cylinder on the front door is straightforward. You can follow the same procedure to remove your old one. However, you should note that the new cylinder won't fit in the same space that the previous one was. The cylinder must be aligned properly so that it can be locked and closed with keys. You should make sure that the cylinder is centered and has an elongated keyway.

Installing the latest uPVC lock in your front door is not difficult, but you should be cautious not to damage the handles or the door frames. If you are unsure about your capability to complete the task then you should seek out an expert locksmith who is Checkatrade approved and has experience working with these kinds of doors. Locksmiths can save you time and money by completing the task quickly.

Reattaching the door handle

There are many reasons you may want to change the lock on your front door. You may have lost a key, or your previous tenant hasn't returned your keys, or you'd like to upgrade to more secure locks. The barrel of the lock on the uPVC door is a straightforward job that can be done within five minutes. You'll need a Phillips head screwdriver, a new cylinder for the lock, and an extra key (if you plan to make use of one). Make sure that the door is propped up or secured so that it does not close during the process.

It's not as hard as you may think to replace the lock mechanism on the uPVC door. It is important to begin by identifying the type of lock you have installed on your front door, and then determine the size you need for the replacement. Most modern uPVC doors come with single euro-cylinder locks, but there are also strip locks and multipoint locks for older doors. Once you know the brand and type of lock on your uPVC front door, it's a lot easier to find a replacement that is similar.

After you've replaced the cylinder, you'll need connect the door handle back to it. To begin, you'll need to loosen a set screw on the spindle shaft of the handle using the aid of a screwdriver. This will allow you to remove the handle and expose the spindle shaft. If the shaft is threaded, you'll need to loosen it a bit and back it up using a screwdriver in order to ensure proper fit.


Test the lock after you have tightened the screws and the lock cylinder. Check that the key fits and turns easily and that the handle's locking mechanism is working properly. Locksmiths can assist you if you're not confident making it your own.

It is also important to remember that uPVC door handles and lock mechanisms require regular oiling to keep their function. This is especially true in areas that experience high wear and tears like those that are frequently used or closed and locked. double glazed door lock replacement kensington of lubricant goes a long ways towards ensuring that they function correctly and will extend their lifespan.

Testing the new lock

A door lock made of upvc is an essential element of your home's security. Like any other device, it can wear out over time or become compromised. The key to a functioning uPVC lock is regular maintenance. This will prevent problems from happening and could compromise the security of your home. This can be accomplished by lubricating internal mechanisms once every six months with a dependable fluid. This will keep the lock working smoothly and prevent it from rusting or becoming damaged.

You can apply a silicon spray in addition to regular lubricant to loosen up the keyway. This will make it easier to insert keys. This is a simple DIY fix that will help you save money over time. Be sure to not use WD-40because it can leave oil residue behind which could cause damage to the lock.

After you have installed the new cylinder, it's essential to test it before you decide if it functions correctly. You can do this by testing the handle both from inside and outside the door. You can now put the handles back in place and re-insert spindle screws if everything is in order. Replace all the screws that secured the handles. Give yourself a pat on the back for a job well done!

If you're seeking to increase the security of your home, a locksmith can install additional features, such as door chains or sash jammers. They can help you choose the best locks for your house. A professional can also assist you in choosing the right size cylinder for your doors, which is crucial because a wrong lock can compromise security.

The cost of replacing the uPVC door lock can differ depending on the type of lock you choose and the number of doors in need of replacement. The cost for a professional locksmith will vary from PS75 to PS100 per hour, however this cost will vary based on the location you live in and the type of lock you require. It is also important to compare locksmith prices before selecting a locksmith.