Tips For Replacing a Window Handle

It is easy to replace your window handle from the convenience of your own home. Use these helpful tips to ensure smooth operation and a stunning appearance.

Remove the screw covers from your uPVC handle to expose the screws. Then, measure the length of the spindle to ensure that you get the right size replacement.

1. Take a measurement of the Spindle Length

When replacing a window handle it's important to determine the dimensions of the spindle right. This is because it could determine how tight or loose the handle is, and whether it locks correctly inside the window frame. The spindle is a metal shaft that connects to the handle as well as the lock in the window frame. The spindle is either a standard industry 8mm cross-section or the earlier 9mm versions. The modern industry standard is 8mm but this wasn't always the case so when buying a new handle it is important to check the dimensions.

Remove the handle. This is done by turning the handle to the open position, and unwinding two screws that hold the handle in place (which are usually hidden behind plastic caps which will need to removed). Once the handle has been removed, take a measurement from the base to the end. This will provide you with the measurements you need to purchase a replacement.


There are a lot of options when it comes to choosing a new window handle, from sleek chrome that can fit into modern homes to traditional brass that looks stunning in restored Georgian rooms, or even the more classic Tudor cottages with curled monkey tail latches! There are many options to choose from, but the most important thing is to select the style that is appropriate to your home.

Espag handles are usually fitted to uPVC windows and are always identical in size, with 43mm centers (2 fixings). Cockspur handles are available in a range of sizes, starting at 58mm to 62mm. Cadenza window handles have a different size because they have an angle blade that operates an interlocking mechanism that is multi-point inside the window.

Another factor when choosing the right window handle is knowing which hand you will need to use, which is defined by the hand you use to open the door. Inline Espag window handles aren't handed and can be used on right or left handed windows. Cranked window handles can only be used with windows that are open in one direction.

2. Remove the Handle

A window handle that falls out can be a hassle, regardless of whether the handle is damaged or worn out. But the good news is that replacing a uPVC window handle is a straightforward job that you can do yourself. All you require is the most basic tools and a bit of time to complete the process.

You will need to first open the window, and ensure that it is not locked. Then, remove the screw caps that hold the handle in place. Once these caps are removed, you can begin to work on removing the handle itself.

The handle is attached to a spindle within the window frame. upvc door handle replacement willenhall is fixed by a pin or a screw according to the type of handle. The most commonly used handles are the inline Espagnolette and cockspur handles. Both of these types of handles are utilized on casement windows, as well as aluminum windows. You can lock the handles with a key to block access by unauthorised persons from outside. You can also lock the handles by turning them clockwise.

To remove the handle, you will require a flat-bladed screwdriver. Once the clip is released, the handle will be able to slide off the spindle. Once the handle that was previously used has been removed, you'll have to determine the length of the spindle and make sure that your new handle will fit.

Once you've determined the proper size for the handle, screw it in place. It is important to ensure that the handle is securely attached and that it rotates in the correct direction (clockwise if the handle is open or counterclockwise if the handle is closed). It is also important to check that it is not fitted upside down.

Replace the cap screws. After you've done this you can test the handle to ensure that it is working properly. Also, you should test the locking mechanism by moving the handle to the locked position, and then back to the locked position.

3. Remove the Screws

A uPVC window handle is an essential element of any home and is often the first item to begin to show signs of wear and tear or damage. This could be due to natural elements, regular use, or even damage caused by criminals trying to gain access to your home. However, a simple repair can easily solve the problem and stop the issue from happening again.

uPVC handles may also be difficult to remove if the locking mechanisms aren't working properly. It's often possible to solve the problem by replacing the multipoint locking mechanism instead of the entire handle. This can save you money.

After you have removed the handle, you will need to take off the screws that secured it. They're usually on the inside face of the base. You may need to use an screwdriver to do this, and it's important that you don't over tighten as this can cause the handle to loosen.

Then, you'll need to find the pins or screws that secure the handle. These are usually located on the inside of the base of the handle. You'll need a screwdriver to remove them. If you want to, you can replace the caps on the screws and check the handle to ensure it is working properly.

Install the handle by adjusting the spindle to the window's cutout mechanism. Then screw it in. Make sure that the handle is in the open position and that any screws are secured before replacing the screw covers if you wished to do this. After this is done, you're done and can enjoy your newly replaced window handle. This should allow you to avoid costly door and window replacements in the future. Contact us if you need more information about this or any other aspect of your uPVC window.

4. Install the new handle

The replacement of a damaged window handle or updating it is simple and can be completed within just a few steps. The key is to identify the type of handle, measure its spindle and identify the tools you'll require to complete the task. Always prioritise the safety of your windows and tools. Be sure to follow the steps and make sure that you have a handle that is safe for use.

To begin, find the screws that hold your window handle in place. Take them off while holding the handle firmly to prevent it from falling and causing injury. After the screws have been removed and repositioned, they can be put in a secure location to be replaced in the future.

After removing the old handle, you can begin installing your new handle. It is essential that the handle fits perfectly to ensure it is functional and secures the window in place. Next move the square metal bar on the handle into the window mechanism hole.

Once the new handle is installed, the final step is to replace the caps on the screws and check to see if it functions. If you are not satisfied with the results or if your window does not open or close correctly Contact our experts for assistance.

The majority of homes in the UK have uPVC windows, and as they are, a lot of them will require to be replaced in the near future due to wear or breakage. Anyone with a bit of DIY experience can easily carry out the process. The most crucial aspect to the success of this procedure is to ensure that you're using a handle that matches the window's dimensions and style. Contact us if are unsure of the type of handle that you need. They will be able assist you with all of the possibilities.