Replacing uPVC Window Handles

Changing upvc window handles is a simple task. It is important to ensure that the new handle fits into the spindle cutouts in the window mechanism.

If the steps listed below are followed properly If you follow the steps correctly, any cockspur handle can fit most windows. The height of the step of the handle is key.

What to Look for

As time passes, uPVC handles on many windows in the UK may begin to show signs of wear and tear. The handle of the window may become shaky or difficult to operate when this happens. This is a simple task that can be completed by anyone who is comfortable using basic hand tools.

The first thing to do is ensure that the handle is firmly connected to the window frame and in a position that is open. The next step is to find the fixing pins or screws that hold the handle in the position it is in. These are typically located on the inside face of the handle. They can be removed with a screwdriver or pliers.

Once the handle has become loose It is best to gently pull it away from its hinges. solihull upvc door handle repairs is then necessary to find a replacement handle with the same design and size. This can be done online or at a local DIY store, and should take around five minutes using an screwdriver.

When replacing the handle of a uPVC handle It is crucial to take into consideration the step height. This is the distance from the base of the handle until it sits on the window frame. This is usually a standard measurement, and it is essential that you check the step height of your current handle prior to ordering the new one.

Depending on the type of handle you have there are various sizes to choose from. Inline handles are available for uPVC windows with lug centres of 31mm, while cockspur handles have lug centres of 43 millimetres. Tilt and turn handles are often found on uPVC windows, and they come with a unique design that allows windows to be tilted to allow for ventilation, and then turned to fully open the window.

The most common cause of breakage in uPVC handles is that they crack inside rather than breaking off from the base section. This can make them hard to open, and it is therefore crucial to ensure that any replacement handle you buy has the same length of spindle as your existing one.

Remove the Old Handle

A poorly installed or damaged window handles can cause double-glazed windows to close or open incorrectly, and can cause them to become stuck. This can be caused by a number of factors, including general wear and tear on the handle or corrosion. In these situations it is essential to replace the window handle as promptly as you can to prevent further damage or loss of function.

When replacing the handles of windows made of upvc and handles, it is important to remove the handles that were previously installed from the window. Start by removing the screw by the handle while it is in the closed position. This should reveal another screw that once removed, you can begin to take off the handle itself. It is a good idea to use an electric screwdriver for this as it will make the task easier and quicker.

It is also important to note that the screws on the handle could be hidden behind plastic caps, therefore it is a good idea to take the Stanley knife to the screw covers and take them off. After you have removed the old handle, you'll be required to inspect the square cutout on the base to make sure that the new handle you choose for the window lock is compatible. It is important to measure the spindle length on the old handle and then compare it with the size of the window mechanism spindle cutout.


The different types of upvc window handles are: Espag handles, which are equipped with a central screw and can turn left or right; Cranked handles that have two screws and are found on tilt and turn windows made of upvc as well as Spade handles, that have an arm that is flat and can be used on either side of the window. It is simple to replace the handle when you've found one that is suitable. Simply screw it into the frame, and ensure that the spindle is correctly inserted in the lock mechanism. After you have done this you can tighten the handle onto the window frame. The replacement upvc handle should now be secured.

Take a measurement of the Spindle

If you need to replace a upvc handle that has fallen, it's likely that the spindle that holds it in place is damaged or is loose. In some instances, it can be fixed using pins or screws to secure it. In some instances it is necessary to replace the handle. There are several kinds of window handles made from upvc. They include espagnolette handles inline as well as cockspur handles. tilt and turn handles. Each type of handle is mounted and replaced in a different fashion.

It is important to measure the current handle before purchasing an alternative. This will ensure that the new handle is of the correct size and fits into the window. Luckily, all handles conform to industry standards of sizing making it relatively easy to identify the correct size.

To measure the size of your handle, first, take it out of the window by turning it to the open position. Then, you should be able to see the size of the screw or pin that holds it. Then take a ruler or tape measure to determine the length of the spindle. Once you know the length of the spindle, you can purchase a replacement one that is exactly the same size.

The step height of a window handle is also a factor to take into consideration when you are buying a replacement. The step height is measured from the base to the point where the handle is positioned on the frame. Typically, this will be approximately 21mm for uPVC windows, and 9mm for aluminium. Dropping something in the gap will allow you to determine how far the handle extends before it comes into contact with an obstruction.

Cockspur handles come with different backsets depending on what type of window you put them in. Inline the espag handle heights range from 43mm from the centre to the centre (two fixing points). Cockspur handles have different backsets based on which window design they are placed in. This is because they have a spur that extends from the handle and then locks over the cockspur wedge striker plate.

Fit the New Handle

After you've chosen the new handle, align it carefully with the holes for screws on the door. Secure it using the screws provided. Install the latch lever the same manner as the main handle if you are also replacing the door handle. Then, you can reattach the door trim to conceal the mounting screws and close the job.

Tips: To take the head of the metal from the wedge of wood Hold the handle so that its longer end is resting on the floor and use a hammer to tap the thin end of the handle. Be careful not to damage the handle or the spindle.