Replacing Window Handles

Replacing your window handles is a great method to enhance the appearance of your home as well as increase its security. It is essential to choose the correct lock and handle for a successful install.

Start by measuring the width of your window three times before recording the smallest measurement.

How to replace the handle on the window

It is possible to change your window handle in a few steps. Using the appropriate tools, you can put the new handle in place quickly and securely. The most important thing is to determine the issue and ensure that the replacement handle is the proper size for your window. Once the handle has been installed, it is important to test it and ensure that it functions as it was intended.

The first step in replacing the window handle is to remove the old one from your windows. This can be done by making sure that the window is in the unlocked position, then removing the screws on the opposite side of the handle. After removing the screws, you can take the handle off to gain access to the two screws that secure it.

Take a measurement of the spindle on the handle, then buy a replacement with the same length. This measurement relates to how far the spindle extends out from the handle base and the amount of spindle that is inserted into the window frame. Consult a professional if you are unsure of how to determine the length of a spindle. They can provide you with an exact measurement.

Installing the new handle is simple after you have measured and replaced the spindle. To do this, you'll have to make sure that the window is in the unlocked position, and then line up the handle with the screw holes. Once the handle is placed, you will need to insert the screws and then tighten them securely.

It is essential to follow the instructions even though it's an easy process. Otherwise, you may end up with an unsecure handle secure or isn't functioning as it should. Additionally, it's also a good idea to check for other problems with the window and its mechanism of operation before replacing the handle. For example, a common reason for broken window handles is that the mechanism for operating is damaged by years of usage. In this situation it is not necessary to replace the handle, but the operator.

Identifying the issue

There are a few factors that can prevent the window handle from functioning. It could be that the handle has fallen out of the window. This is easily repaired by following a few easy steps. It could also be that the gears in the handle are worn out and need to be replaced. This can usually be done by taking the handle off and inspecting it for signs of wear.

This is a much more serious problem, as the locking mechanism, and not the handle, is the culprit. This is a much more serious problem as it prevents you from opening your window from the inside. It also makes it harder for someone to break in through the window.

Another common reason for windows that don't open is that the splines of your crank operator shaft are stripped. You can test this by turning the handle to determine if there are signs of wear on the teeth of the crank operator shaft. If they do, you'll need to replace the crank operator. You can purchase these online or at your local hardware store or home center.

The window that doesn't open is often caused by the crank handle not being properly "nested" in the cover of the operator. This is usually due to rust and dirt that has built up over time, or may be due to the handles not being lubricated. This is usually a straightforward solution, which requires an extended set screw (available at home centers and hardware stores).

It is also important to know that the handles used on uPVC window types may differ. The handles are produced differently by different manufacturers, which can result in slight variations in size. You must ensure that the replacement handle is the right size for your window and you can do this by measuring the distance between screw holes on the handle base.

Identifying the new handle

It's important that you select the correct handle for your window before you install the new handle. This will not only make sure that your windows are safe however, it will ensure that the handle fits correctly and is operating smoothly. There are a number of things to take into consideration when choosing your new handle, such as the size, style and the lock mechanism. It is also important to take into consideration the longevity of the handle as it's not unusual for handles to become damaged in time.

The cockspur handle is a common handle that is found on older uPVC Windows. The handles are equipped with a spindle that goes through the handle base into the gearbox in the frame of the window. The handle rotates the internal mechanism and opens the window when you turn it. door handle repair can be locked using keys and are easy to use.

Another type of handle is the espagnolette handle which is commonly found on the latest uPVC windows. These handles are used on tilt and turn windows, and when you open the window you can move it either by expanding the operating arm, or by using an incline crank to rotate the mechanism that opens the window. Espagnolet handles are typically secured by a multipoint locking system that provides additional security.

It is important to ensure that the new handle you select has the proper step height in case you are replacing an espagnolette handle. This is the measurement that runs from the top of the nose to the back of the frame or base where the screw sits. Over the years, different steps were used. However 21mm is the standard for uPVC and 9mm for aluminum.

It's time to get started. Remove the old handle by unscrewing the window using the aid of a screwdriver. Make sure you're working in a well-lit area, as some screws can be difficult to see. If you are having trouble taking the screws out, turn the handle 90° and look for small caps or stickers that cover the screws. Once you've removed your old handle, take note of the measurements of the spindle at its base so that you can purchase a replacement with the same spindle length.

Getting started

There are several options when replacing the window handle. The first step is to identify the type of handle you need. This will let you select the correct replacement and ensure the new handle fits properly.

After you've decided on the type of window handle is suitable for you, it's now time to look around. There are many different types and finishes, so make sure you find one that's perfect for your home. The right handle choice will ensure that your windows are as secure as they can be, and it will also give a stylish touch to your home.

Once you have found the ideal handle, it's time to put it in place. It's the same process as removing the handle you had previously. Be sure to adhere to the directions to avoid any problems. Installing the new handle requires the spindle is aligned with the existing screwholes. Once the handle is in place you can screw it into place, and then screw the screws back in (be sure to use screw caps if they are included with the new handle).


If you have an older uPVC windows, you might need cut the spindle to size prior to installing it. This can be done with either a handsaw or angle grinder. Wear safety glasses and gloves.

You can test the handle after installation to make sure that it works exactly as it should. When you're confident that it's working correctly then put the screw caps back on and enjoy your new uPVC window handle.

Replacing the window handle is a fairly simple task that can be completed by most homeowners. With a bit of planning and careful execution, you will get your window handles looking and functioning like new in no time! If your uPVC window handles are damaged, make sure to replace them as soon as possible to ensure your windows are protected and ensure that your home is safe.