Replacing uPVC Window Handles

Switching the handles of windows made of upvc is a simple task. The important thing is to ensure that the new handle is a good fit for the spindle carved out in the window mechanism.

If the steps below are followed the cockspur handle will fit most windows. The key is the step size of the handle.

What to Look for

As time passes, uPVC handles on many windows in the UK begin to show signs of wear and wear and tear. The handle of the window may become shaky or difficult to operate when this happens. Anyone who is comfortable using a basic hand tool can complete this relatively simple job.

The first step is to make sure that the handle is securely attached to the frame of the window in its open position. The next step is to locate the fixing pins or screws that keep the handle in position. They are usually located on the inside face of the handle and can be removed with a screwdriver or pliers.

When the handle is loose and sagging, gently pull it back from its hinges. The next step is to find a replacement handle of the same style and size. This can be accomplished in a DIY store or online. The procedure should take just five minutes and requires a screwdriver is all you need.

When replacing the handle on a uPVC handle it is essential to take into consideration the step height. This is the distance from the base of the handle to the point at which it is placed on the frame of the window. This is a common measurement and you should confirm the height of the step prior to ordering a replacement handle.

There are several sizes depending on the kind of handle. Inline handles for uPVC windows typically have 31mm lug centres, and there are also varieties of cockspur handles that have 43mm centres. mouse click the next article and turn handles are commonly used on windows made of uPVC, and they have a special design that allows the window to be tilted in to allow for ventilation, and then turned to open the window completely.

The most common uPVC handle breakage is internal cracking, rather than a fracture from the base. This makes it difficult to open. It is important to ensure that any replacement handle has the same spindle as the original one.

Remove the handle that was previously used

If your window handles are damaged or improperly fitted, they can cause double-glazed windows to close and open incorrectly. They could even become stuck. There are many reasons for this like general wear and tear or the corrosion of the handle made of metal. In these instances, it is important to locate replacement upvc window handles as soon as possible in order to avoid further damage and loss of function.

One of the first steps to do when replacing the handles on your windows made of upvc is to remove the old handle from the window. Begin by removing the screw covered with the handle when it is in a closed position. Once you have removed that screw, you are able to remove the handle. It is a good idea to use an electric screwdriver for this, as it makes the task much easier and quicker.

You should also be aware that screws could be hidden in caps made of plastic. It is best to remove the covers using a Stanley knife. Once the old handle is removed, take a look at the square cut out at the handle's base to ensure that the new window lock handles are compatible with it. It is important to measure the spindle length on the old handle and then compare it with the size of the window mechanism spindle cutout.

There are three kinds of upvc handles: Espag handles with a central screw that can be turned left or right and Cranked handles that have two screws and Spade handles that have arms that are flat and can be used either side of the windows made of upvc. It is easy to replace the handle once you've located one that is suitable. Simply screw it into place, and ensure that the spindle is properly inserted into the lock mechanism. After you have done this, tighten the handle to the window frame. The new upvc handles should now be secure.

Take a look at the Spindle


If you have to replace a Upvc handle that has collapsed, it's likely the spindle that holds it in place is damaged or loose. In certain situations, you can tighten the spindle using pins or screws. In certain situations it is necessary to replace the handle. There are several kinds of window handles made of upvc. There are three kinds of handles: inline espagnolette, tilt-and-turn, and cockspur. Each kind has a distinct procedure for installing and replacing the handle.

Before buying a replacement handle it's important to know the dimensions of the one you have. This will ensure that the handle fits the window in a proper manner and will be the right size. Luckily, all handles conform to industry standards of sizing making it relatively easy to identify the correct size.

To determine the size of the handle move the window to the open position. You should then be able see the size of the screw or pin that is holding it. Make use of a ruler or tape measure to determine the length the spindle is. Once you have determined the length of the spindle, you can purchase a new spindle that is the same length.

The step height of a upvc window handle is also important to take into consideration when purchasing replacements. The step height is measured from the base to the point at which the handle is placed on the frame. This is usually about 21mm or 9mm for aluminium and uPVC. To ensure that the new handle will work the gap, drop something into the space to determine how far it extends before meeting an obstruction.

Cockspur handles can have different backsets, based on the style of window you install them in. Inline the espag handle heights range from 43mm from centre to center (two fixing points). Cockspur handles however have different backset heights according to the style of the window they're in. This is because they have a spur which extends from the handle and locks onto a cockspur wedge-striking plate.

Fit the New Handle

Once you've selected the new handle, align it carefully with the holes for screws on the door. Then, secure it with the screws provided. Install the latch lever in similar fashion to the handle on the main handle when you're replacing the door handle. Finally, reattach the door trim to conceal the mounting screws and finish the job.

Tips: To remove a metal head from a wooden wedge, place the handle on the floor so that its wide end is on the ground. Then, you can use an hammer and tap the narrow end. Be careful not to damage the handle or the handle spindle.