UPVC Door Handles Replacement Guide

Once you have the right measurements, replacing upvc door handle is a simple DIY project. These measurements include the distance between the backplate's fixing centres (sometimes called PZ) and the center of the key hole.

The most popular kind of uPVC door handle has two levers inline one internal and one external, connected by spindles. They operate the multi-point lock which is used in uPVC aluminum, uPVC and a few wooden doors.

Brands & finishes

A damaged uPVC door handle could be more than an inconvenience. It could also make your home vulnerable to burglars who may be able to force open the lock and escape into your property. This is the reason it's essential to recognise when your uPVC door handles are beginning to fall apart and take action as soon as possible.

Fortunately, it is an easy task to replace your uPVC door handles. You'll require just a few tools and few precise measurements. In most cases, you can simply screw in the new uPVC handle and you're good to go. It's always best to choose locks and handles that meet the highest standards of security.

There are many different types of uPVC handles on the market that you can choose from. There are many different kinds that include lever handles, pad handles, offset handles and snib handles. Lever/lever handles are very popular with homeowners and consist of two movable inline handles. Pad uPVC handles are smaller and have an offset design. This lets you secure the outside of your home following entry.

A uPVC offset handle is made up of two pads, one fixed and the second one movable. This kind handle is generally used on sliding patio doors. Snib handles look similar to offset handles, but they can also be utilized on uPVC French doors.

When choosing your replacement uPVC door handle, you should take into consideration the style of your existing windows and doors. The handle should match the colour and finish of your doors. Certain handles are available with a variety of finishes that include black and white, while others are available in more stylish choices like gold or chrome.


It is crucial to make sure that you get your screw-to-screw as well as PZ measurements correct when taking your measurements. The PZ measurement is the distance from the center of the hole in the spindle to the centre of the keyhole. The screw-to-screw measurement is the distance between the screw hole on the existing handle and the nearest screw on your door frame, and it's crucial to accurately measure this in order to find an appropriate replacement.

Measurement & Fitting

The uPVC handle is fitted with two levers - one on either side of the lock mechanism which make it easy to operate from both inside and outside. Handles are an important element of the security mechanism on the door. They provide a comfortable grip, and they work without strain. With the correct uPVC handles, you can keep your door secure and look stunning at the same.

Choosing the correct uPVC handle can be difficult and confusing since there are numerous sizes, shapes and styles on offer. When choosing a replacement handle for your uPVC door, you should be aware of three crucial dimensions. These are the backplate fixing centers as well as the key hole and lever size and the spindle size. Taking these into account will make sure that your new handle is a good fit for your uPVC door and provides an excellent fit.

It's easy to measure these points but you need to be as accurate as you can. If you're not careful you could end with the wrong handle to fit the existing one and could cause issues when opening your uPVC door. The most important measurement is the top screw on the backplate fixing centre, often known as the PZ size. This measures from the pivot point of the keyhole or handle lever to the centre of the screw. This is usually 92mm, however it is possible to vary.

Verify that the uPVC handles on your doors are fitted with the correct number of keyspindles for your multi-point locking. The ideal scenario is that they should be in line with the number of keys you use to lock or unlock your uPVC door. Some older doors use a single spindle for the lock. More modern doors have two spindles that allow independent operation both indoors and outdoors.

It is not advisable to have a sliding uPVC handle, as this can put an excessive strain on the locking mechanism. This could result in broken parts. Look for uPVC handles equipped with spring cassettes to avoid this. They are not only visually appealing, but they could provide your door locking mechanism a longer life time by removing a portion of the force that operates it.

Broken Spring Cassettes

If a door handle gets stiff it can often be caused by a problem in the tubular latch itself. It is usually a straightforward solution that can be solved by repositioning the replacement handle's fixing plates that are inside it. First open the door and check that there are no obvious obstructions to the latch plate, such as loose screws or signs of internal parts peeking through. If this isn't the situation, one of the springs in your uPVC handles might require a change.

The simplest way to do this is to buy an repair kit for door handles. It will include all the tools needed to take the handles off and then reposition their cassettes. Follow the steps and you'll soon have a sagging / drooping uPVC handle that is fully operable.

A floppy uPVC handle could be caused by thermal contraction but it's more likely to indicate that the gearbox has broken. This isn't a problem that you can fix at home. You'll require the assistance of a locksmith.

If you need to replace the gearbox on your uPVC door, make sure you use an authentic replacement that will ensure that everything is fitted properly. Using an aftermarket replacement that is cheaper may cause problems, like an insecure lock or lower security for your home.

Another option is to replace the entire uPVC handle mechanism and lock. This will not only resolve the sagging problem but will also ensure that your door handle is fully operational and secure. It is important to remember that this isn't a simple or cheap solution. It will involve the removal of your existing uPVC handle and replacing it with a brand new handle. It's important to note that this option is only suitable for those who have a sprung handled double glazing door since the door will need be repaired. For a more cost-effective and quicker option, you can purchase handles that come with built-in springs, which will remove drilling holes in the doors.

Can I Fit a uPVC Door Handle onto an Aluminium or Timber Door?

There are My Source to take into consideration when choosing the right doors for your home. uPVC doors provide durability, security and energy efficiency whilst aluminium doors are modern and visually pleasing. When it comes to the design of the door you're planning to install the correct handle is crucial. It is crucial to select the appropriate handles for your home regardless of whether you're replacing your old ones or adding new ones. Our uPVC replacement door handle guide will assist you to make the right choice and install it with confidence.

The process of changing the handle of an uPVC handle is relatively simple and only requires basic tools. First, you'll need to take off the handle that was previously in use. You can take out the screws holding it in place with the help of a screwdriver. After the screws have been removed, it is possible to pull the handle away from the door.

You will then need to measure the door handle. You'll need to determine the middle of the fixing holes on the backplate. This is typically referred to as the PZ measurement. It will determine the size of the handle spindle. Once you know this information, you can purchase an alternative handle that is of the correct size for your door.

There are many kinds of uPVC handles that can be found to meet your requirements. Some of these handles are designed with extra security features like anti-drilling security as well as cylinder guards and mole grips. These uPVC handles can be fitted to uPVC, aluminium and wooden doors, and are perfect for those looking for increased security for their home.

If you are seeking a more traditional uPVC handle There are other options that will suit your needs. They are available in a variety of finishes including black, chrome and gold. They're generally more expensive than standard handles but will provide an attractive finish to your door.

It is important to check the dimensions of the uPVC handle prior to ordering. You'll need to consider the measurements listed above, the key hole and lever dimensions, as well as the backplate fixing centres to ensure that the new handle is a perfect fit for your door.