Why is My Skoda Kodiaq Key Fob Not Working?

Georgina Cianci had been driving her Skoda Kodiaq car for more than a year before it began to do odd things. It would lock itself and she would often find her son locked inside.

A lot of the issues with key fobs are minor and can be resolved with a simple fix or replacement. There could be a more serious issue.

Dead Battery

The most frequent reason for the car not responding to the button is a dead battery inside the key fob. You may need to replace the battery or reprogram the remote keyless receiver module. If this is the case, use a battery that matches both the voltage and the size of the original.

The transmitter portion of a key fob is home to a flat disc battery that is simple to replace. To remove the old battery, simply fold the front of the device inwards and insert a screwdriver in the area marked. Install the new battery, ensuring that the positive side is upwards.

After the battery dies it will decrease in capacity. This reduces the range of your device and forces you to move closer to the car to unlock it or to start it. The battery's lifespan can vary from two to four years based on how it is used. If the battery has been exposed to water, you can try to activate it by cleaning it with isopropyl alcohol and let it dry.

Sometimes your key fob may stop working due to a hardware or software problem. In this instance, it is best to seek out a reputable lock repair service. They will have all the tools and equipment needed to complete the work quickly and efficiently. They will also provide you with an estimate upfront and won't harm your vehicle.

Another issue that can cause the key fob for your skoda kodiaq key fob to not function is the presence of metal objects close to it. These objects could interfere with radio transmission, and even stop your vehicle from getting started. In some instances, you can fix this issue by removing your key from the ignition. You can also buy a faraday cage that will shield the key from electromagnetic interference.

If you have a skoda kodiaq key that isn't working, it could be due to the battery not being charged or a weak connection in the transmitter module. You can test the batteries using a multimeter, voltage meter or modify the remote keyless receiver module using an OBDII scanner tool. skoda kodiaq key fob not working can also test for looseness or corrosion in the connectors of the transmitter module.

Loose Clips

The key fob for the skoda Kodiaq is equipped with metal clips to hold the battery in place and complete the circuit. If these clips are loose they can cause poor contact, which prevents the remote from responding to commands. This is the reason it's essential to test the clip's connections using a multimeter or a voltage meter. You can tighten the contacts when they're loose to improve the connection. If the issue persists then you might need to replace the transmitter module or electronic chip.

The best source to locate genuine parts for your skoda is the Skoda dealership. The experts will examine the car with the correct diagnostic equipment to pinpoint the root of the problem and provide you a replacement. They will also offer an assurance on the part.

It doesn't matter if you're to a family vacation or sending your children to school, you need to be prepared. KODA Karoq is ready for anything. This seven-seater or five-seater SUV has powerful engine options and a large boot. The vehicle also comes with a range of Simply Clever solutions that will make your travels easier and more enjoyable.

For instance, a tablet holder in the head restraints on the front will make sure that your children stay entertained throughout long trips. The VarioFlex system allows you to fold, move, or remove the rear seat. The KODA Karoq is able to be set up to meet your needs precisely. There's a sleep kit that includes a blanket for the rear seats.

Simply Clever also offers a handy umbrella storage area on the driver's side door, a storage area for small objects within the center console, and an holder that can hold a drink bottle inside all doors. You can also connect your smartphone via SmartLink to the infotainment system to answer calls and messages, listen to music, or access online navigation and information services.

The rear backrests can be folded down in a single step to transport larger items that would not fit into the large boot. If you require a helping hand opening the tailgate, the electric tailgate opener with Tip-To Close function is at your disposal.

Water Damage


A key fob can be used to lock and unlock your vehicle and activate a number of comfort features. The remote key fob may not function for many reasons. These include a dead battery, worn buttons and water damage. Fortunately they can be resolved without a lot of hassle and save you the expense of a new car key.

If your skoda kodiaq key fob has been exposed to water damage, then the first thing you should do is to remove and replace the battery. This is a simple step that anyone who is a DIY enthusiast can perform. You can easily purchase a flat CR2032 and then insert it into the tiny slot on the key fob. It is a good idea to clean the electronic component using isopropyl ethanol, and then let it dry completely prior to replacing the battery.

After the battery has been replaced, it's important to check that the buttons are working properly. If the button needs pressing repeatedly to work this means that the transmitter module or electronic chip is faulty and requires replacement. The best place to find this replacement is a trusted dealer who will be competent to reprogram the key fob and supply you with a fully functional remote.

Another possibility is that the issue is not with the key fob itself but rather the car's battery. A battery that is weak or dead can stop the key fob from communicating with the vehicle, so be sure to have your car's battery examined by a professional. Schindler's Garage will perform a quick battery diagnostic test to determine if the issue is with your car, or the key fob.

If your key fob has been exposed to a significant amount of water, it's likely ruined and will cease to function. It's helpful to take it apart and inspect the circuit board for any indications of corrosion or green materials. These components aren't fond of water and are susceptible to fail when they are wet. If it's been in an wash cycle or some short exposure to clean rainwater, it might be salvageable and simply need an upgrade to the battery.

Electronic Chip

The key fob contains an electronic chip that sends the signals generated by your remote to unlock the car and start it. When the chip is faulty the remote won't transmit any signals and the car will not respond to the key. There are a variety of factors that could cause this to happen, for example:

A dead battery is the main reason for the Skoda kodiaq remote not working. The transmitter part of the key fob holds an adipose disc battery, typically CR2025 or CR2032. To replace it, you need to open the fob with the help of a screwdriver, and then carefully pull off the front cover to reveal the transmitter. Then remove the old battery and replace it with a brand new one, ensuring that it is the same type as the previous one.

You can also check the battery's contact points to determine if they are loose or damaged, which may prevent the transmitter from receiving signals from the remote. Use a voltage meter or multimeter to examine the contacts. If they are damaged, you may have to replace the entire key fob.

The key fob can also stop working if the device isn't properly programmed. This is a delicate procedure that should be left to a skilled technician who has access the necessary diagnostic equipment. They will first need a diagnosis to determine the cause of the problem and then decide if it is fixable with programming or if they'll require replacing the antenna or chip.

When the key fob is within a few metres or that of the vehicle, the anti-theft feature in your Kodiaq will be activated. The immobilizer will confirm that the signal comes from the correct key. If not, the vehicle will shut down various components like the ignition coil fuel pump, injectors and fuel pump to stop it from being started. To avoid any issues it is recommended to keep your keyfob clear from objects made of metal like a Faraday Cage. It is also possible to reprogramme the receiver module using an OBDII scanner to see if it solves the problem.