UPVC Window Hinge Replacement

uPVC windows are susceptible to damage and damaged over time and cracked. This can lead to gaps and drafts which let cold air in and increase your electricity bills.

Fortunately, window hinge replacement is simple and doesn't need to break the bank. Learn how to do it by reading this article.

Fixing the Hinges

Hinges are an essential component of any uPVC windows and have a big impact on how the window functions. They're an intricately engineered arrangement of parts that connect the frame hinge to a counterpart hinge on the window sash. These hinges are adjustable, allowing for fine-tuning of the window's operation and durability. This guide will help you unravel the mystery of UPVC window hinges, equipping you with the knowledge to improve your understanding of window functionality.

Verify that you have the correct hinges for your uPVC windows. There are two types of hinges that are typically used for uPVC window frames - top hanging and side hanging. Top hung windows open from the top, while side hung ones open to the sides of the frame. You can determine the type of window you have by the arrow on the hinges - the arrow should point in the direction that the window opens.

The hinges could cause issues with the window's opening if they're not fitted correctly. This could also lead to a draft, which is cold air coming into your home. If the hinges of your uPVC windows are not aligned, it may be difficult to reach the handles and open the windows.

After you've verified that the hinges are in good shape, it's now time to put them in place. This is a simple job that can be completed in just 10 minutes. However, careful planning is needed as you'll need to remove the handle from the window and ensure that the hinges are in the correct position.

You'll need a couple of tools, including a drill and screwdriver. Take a photo of the hinges you want to replace before you begin. You'll need a screw set as the original screws are too big to fit. You can purchase a screw pack in most DIY stores, as well as on the internet.

Greasing the Hinges

Grease can get stuck on the moving parts of a hinge, causing it to make a noise. Regularly lubricating the hinges can help to prevent this. You can use a white lithium grease or spray lubricant for this. If you choose to use a spray, make sure to get it into the corners of the hinge and around the pin as well. Then, close and open the door several times in order to let the lubricant work its way into all the moving surfaces.

If you notice that the squeaking isn't stopping then you might want to consider using a penetrating oil instead of a normal grease. This oil is designed to get into crevices, dissolving rust and dirt to allow the hinge to move easily. To use it, spray a liberal amount onto the hinge and allow it to soak into.

Then, clean off any excess with a cloth or paper towel. You can also cover the hinges with petroleum jelly to keep them in good condition and lubricated. It is important to avoid getting any on the window frame or the sash. This can cause damage.

Melted wax is a different and effective fluid. You can purchase this from a local hardware store or use candles. Simply light the candle and let it melt. Once the wax is melting it is possible to drip it onto the hinges, and then wipe it off using a cloth.

You can also try taking out the hinge pin and then re-lubricating it. Depending on how stuck the pin is, you may require a tool to get it out. Try a the hammer, however in the event that it is rusted, this could cause damage to the wood or damage the hinge. If this happens, try to tap the end of the pin using the screwdriver. Then, re-lubricate the hinge and put the pin back in.

There are many window hinges that you can choose from. You can use restrictors hinges to prevent children from opening windows too wide, or egress hinges which are only suitable for windows with fire exits. Alternately, you can opt for slimline hinges to reduce space.

Fixing the Sash Frame

The frame could have sagged when your window doesn't open properly or close. This can lead to draughts or other problems. The most common cause of sagging is the application of excessive force when opening and closing the window. This can damage the internal tracks and result in broken pulleys and stoppers and lopsidedness to the frame.

In this instance, it is best to contact a professional who specializes in replacement windows made of Upvc. A professional can make sure that the hinges are installed correctly and that the window is secured without cracks or gaps. It is also possible to replace the rubber gasket which is essential for keeping draughts out.

The first step is removing the sash. You will need remove the screws that hold the sash, as as the screws that secure it to window casing. Once you have removed your sash, it is important to wash the inside of the frame and the window sash using soapy water. This will prevent dirt from causing the sash to get stuck in the frame and allow it to move and close correctly.

The eight screws that secure the sash to the window casement need to be removed following. They should be on the left and right hand sides of the casement. To loosen them, you will require a screwdriver as well as an Allen key. Once you've loosened the screws, you'll need to adjust them to ensure that they are in the right position. Once you are satisfied with the alignment, you can tighten the screws.

Lubricate your hinges regularly. This will allow the sash move easily, and stop the hinges from becoming loud or cracking. It is recommended to lubricate the hinges with light engineering oils that contain corrosion inhibitors. At least once a year and you should do this. Also, you should clean your hinges and sash regularly to keep them in good working order and functioning efficiently.

Verifying the Screws


The screws that secure the hinges in place may be loosen over time. This can affect how the window shuts and opens. This issue can be fixed by re-tightening the screw. This can be accomplished using the screwdriver. It's important to use the correct screwdriver because the wrong type could damage the screw thread.

Make sure that all screws holding the frame to hinge and frame to window are tight. They can come loose as time passes. This will stop the hinges from coming loose or becoming wrongly aligned, causing the window to slide or rest above the frame when it is closed.

This is a very common issue with upvc windows and it's often caused by the hinges being too long for the window. This can be fixed by replacing the hinges. If you know what kind of hinges you have it's simple to replace them. It is essential to have the correct hinges for your windows. There are many different kinds. If you have a narrow top-opening window, you'll require Egress hinges instead of regular hinges.

If you are replacing the hinges in your upvc window, be sure to be attentive to the handing diagram that is on the packaging. This will let you know whether the hinges have a left- or right-handed style. Also, be sure to adhere to the guidelines from the manufacturer when installing the new hinges.

In RepairMyWindowsAndDoors to lubricating the hinges, it's also a good idea to periodically check and adjust them so that they're working properly. This will help prevent any issues with the operation of your window made of upvc and help it to last longer.

UPVC hinges are crucial for the operation of double-glazed windows. By knowing their anatomy, types, and importance, you can enhance your repair and maintenance skills. This will ensure that your windows open and close with ease and efficiency for years to come.