Tips For Replacing a Window Handle

Switching your window handle is an easy project that can be completed in the convenience of your own home. Follow these tips to ensure a smooth and beautiful finish.

Begin by removing the screw covers to expose the screws within the uPVC window handle. Then measure the spindle length to ensure you get the correct size replacement.

1. Take a measurement of the length of the Spindle.

When you're replacing a window handle it's important to determine the dimensions of the spindle correct. It could influence the tightness or looseness of the handle as well as whether the handle locks correctly into the window frame. The spindle is a metal shaft that connects the handle and the lock within the window frame. The spindle is available in either the standard 8mm industry cross-section or the older versions that measure 9mm. Modern industry standards are 8mm but it wasn't always this way. It is essential to check the measurements when buying the handle you want to purchase.

Remove the handle. This is done by turning the handle to the open position, and unwinding two screws that secure the handle (which are usually concealed behind plastic caps that must be removed). Once removed take a measurement from the base of the handle until the end of the spindle. This will give you the measurements needed to purchase a replacement.

There are many options available when you're looking to select the right window handle. From sleek chrome that can fit into modern homes to traditional bronze with a burnished finish that looks stunning in restored Georgian rooms, or the more traditional Tudor Cottages with curled mongoose-tail latches. There are a lot of options, but the most important thing is to pick one that complements your home.

Espag handles are commonly used to uPVC window frames and are always the exact same size, with a 43mm centre. Cockspur handles can vary between 58mm and 62mm however luckily there are replacements available for both sizes. Window handles made of Cadenza are a different size again since they have an angled blade which operates an interlocking mechanism that is multi-point inside the window.

When selecting a window handle, you should also consider the hand you use to open your door. Inline espag handles are compatible for left or right-handed windows. Cranked window handles are hand-operated and are only used on windows that open in only one direction.

2. Take the handle off

A window handle that falls out can be a hassle, regardless of whether the handle is damaged or worn out. But the good news is that replacing a uPVC window handle is a very easy job that you can do yourself. All you need is some basic tools and some time to complete the task.

You must first open the window, and then ensure that it's not locked. The next step is to remove the screws that are holding the handle in place. Once these are removed, you can start working on removing the handle itself.

The handle itself is attached to a spindle in the window frame. This is either held in place by a pin or a screw according to the type of handle. The most common handle types are inline Espagnolette handles and the cockspur handles. Both kinds of handles are found on casement windows, including aluminium ones. You can lock the handles with a key in order to prevent unauthorised access from the outside. Or you can lock the handles by turning them clockwise.

To remove the handle you will require a flat-bladed screwdriver. Once the clip is released, the handle should slide off the spindle. Once the handle that was previously used is removed, you'll need take a measurement of the length of the spindle to ensure that the new handle will fit.

Once you have the right size, you are able to put the new handle in the correct position. It is essential to make sure that the handle is securely fastened and that it is rotating in the proper direction (clockwise when the handle is open and counterclockwise if handle closes). It is crucial to ensure that the handle hasn't been placed upside down.

Then, you must replace the screw cover caps. After you've completed this step, you should test the handle to make sure it's functioning properly. upvc door handle repairs dagenham Repair My Windows And Doors can also test the locking system by moving the handle from an unlocked position to the locked position and back.


3. Take off the Screws

A uPVC handle is a crucial component of any house and is the first thing that shows signs of wear or damage. This could be due to natural elements or by regular use, or malicious damage caused by opportunistic criminals who might seek to open a closed window and gain entry to your home. A simple repair can fix the issue and stop it from happening again.

UPVC handles can be difficult to open if the locking mechanism isn't functioning properly. In most cases, the issue can be resolved by replacing the multipoint lock instead of the entire handle and it's worthwhile to check this out as it can save you money.

After you've removed the old handle, you will need to take off any screws that held it in place. These are typically located on the inside face of the base. You may need to use an screwdriver to do this, and it's important to not over tighten the screw as this could cause the handle to become loose.

Then you will need to find the screws or pins that keep the handle in place. They will likely be located on the inside face of the handle base and you will need to use either a screwdriver or pair of pliers in order to remove the screws. After they've been removed, you'll need to replace the caps on screws in the event that you want to do so, and then test the new handle to ensure it's working properly.

When you're ready for installing the new handle, simply align the spindle with the cut-out in the window mechanism and screw it into the right position. Make sure that the handle is in the open position and that any screws are securely secured prior to replacing the screw covers if you wished to do this. Once you've completed this, you're all done and you are able to enjoy your new window handle. This should help you avoid costly door and window replacements in the future. If you would like more help with this or any other aspect of your uPVC windows don't hesitate to get in touch with us.

4. Fit the New Handle

If you're replacing a damaged handle or simply changing it the procedure is easy and can be accomplished in just a few steps. The most important thing is to identify the type of handle, determine its spindle and know what tools you'll need to complete the job. Always prioritise the safety of your windows and tools. Take your time to follow the steps and make sure that you have an appropriate handle for use.

To begin, find the screws that hold the window handle in place. Remove them while holding the handle firmly to prevent it from falling and causing injury. Once the screws are removed, you can put them in a safe location to be replaced in the future.

Once the old handle has been removed, you can now begin to install your new handle. It is crucial that the handle fits perfectly to ensure it works properly and locks the window in its place. Then you need to slide the square metal bar on the handle into the hole for the window mechanism.

The final step is to replace the screws caps and then test the handle to ensure that it is working. If you are not satisfied with the result or the window doesn't open or close correctly, call our experts for assistance.

The majority of UK homes are equipped with uPVC Windows. Therefore, a large number of windows will need to be changed at some point due to wear and tear or breakage. Anyone with some DIY expertise can complete the task. It is important that the handle you use matches the size and style of the window. If you're not sure what type of handle you require, don't hesitate to reach out to our team, who will be able to provide you with the possibilities available.