Replacing Window Handles

The replacement of window handles can improve the look of your home while also increasing the security. It's important that you use the correct handle and lock for a successful installation.

Begin by measuring the width of your window three times and note the smallest measurement.

How to replace the window handle

It is possible to alter your window handle with a few simple steps. Using the right tools, you can install your new handle installed quickly and securely. The most important thing is to determine the issue and ensure that the replacement handle is the proper size for the window you have. After the handle is installed, it is crucial to test it and make sure it functions as intended.

The first step in replacing the window handle is to take the old handle from your windows. This can be done by ensuring that the window is in an unlocked position, and then removing the screws on the opposite side of the handle. Once the screws are removed you can remove the handle and access the two screw holes that hold it in place.

Find the spindle of the handle, then buy a replacement that is the same size. This measurement is the distance between the handle base and where the spindle will be within the window frame. If you are unsure how to measure the length of the spindle seek out a professional because they will be able to provide you with an accurate measurement.

After you have taken measurements of the length of the spindle, and have obtained the replacement, you are now able to install the new handle. To do this, you'll be required to ensure that the window is in the unlocked position. Then, align the handle with the screw holes. Once the handle has been installed you'll need to tighten and insert the screws.

It is crucial to follow the directions regardless of whether it's a simple process. You could end having a handle that is not secure, or isn't functioning as it should. Additionally, it's recommended to identify any other issues with the window and its operation mechanism before replacing the handle. A common cause for broken window handles is the wearing down of the mechanism that operates them over time. In this scenario, it is not required to replace a handle, but rather the operator.

Identifying the problem

There are several things that can stop a window handle from working. It is possible that the handle has fallen out of the window. This can be fixed by following a few easy steps. It could also be that the gears in the handle have worn out and require to be replaced. This can be accomplished by taking the handle off and examining it for signs of wear.

This is a much more serious issue, because the locking mechanism, and not the handle, is the culprit. This is a more serious issue because it prevents you from opening your windows from the inside and could make it difficult to break into your home through the window.

It could be that the splines on your crank's shaft have been stripped, and this is another common cause of a window not opening. The most effective way to test for this is to turn the handle and checking if there are any indications of the teeth on the crank operator shaft becoming worn. If they do then you'll need to replace the crank operator. You can purchase these online or at your local hardware store or home center.

A window that isn't opening is usually due to the crank handle not being "nested" inside the operator cover. This is typically caused by rust and dirt that has built up over time, or it may be a result of the handles not being lubricated. It is usually a simple fix, which involves using a longer set screw (available in home centers and hardware stores).

You should also be aware that the handles you use on uPVC window types may differ. This is due to the fact that handles are manufactured in various ways by different manufacturers and this can result in them being slightly different in size. You will need to ensure that the replacement handle is the right size for your window and you can do this by measuring the distance between the screw holes on the base of the handle.

Identifying the new handle

It's important that you select the right handle for your window before you install the new handle. Not only will this help make sure that your windows are secure however, it will ensure that the handle fits correctly and is operating smoothly. There are a number of things to consider when selecting the handle you want to purchase, including the size, style and lock mechanism. It's important to consider the durability of the handle. Handles are susceptible to damage in time.

A common handle is the cockspur handle, which is commonly found on older windows made of uPVC. These handles have a spindle that goes through the handle's base and into the gearbox of the lock inside the window frame. When you turn the handle it turns the mechanism inside and opens the window. Cockspur handles can be locked with keys and are extremely simple to use.

Another type of handle is the espagnolette handle, which is found on modern uPVC windows. These handles are found on tilt and turn windows and when you open the window you can move it either by stretching the operating arm or by using an incline crank to rotate the mechanism that opens the window. Espagnolet handles often have a multipoint locking mechanism that gives additional security.

You must check that the new handle you choose has the proper step height in case you are replacing an espagnolette handle. This is the measurement from the bottom of the nose to the back of the frame or base where the screw sits. Over time, various step heights were used. However, 21mm is typical of uPVC and 9mm for aluminum.

It's time to begin. Remove the old handle from the window by removing it with a screwdriver. Make sure you're working in a well-lit space, as some screws can be tricky to see. If you're having difficulty taking the screws out, turn the handle 90degrees and look for small stickers or caps covering the screws. Once you've removed the old handle, make a note of the measurement of the spindle at its base to allow you to buy a replacement that has the same spindle length.

Getting started

When upvc door handle repairs chesham repairmywindowsanddoors comes to replacing the window handle there are several alternatives to choose from. The first thing you should decide on the type of handle that you need. This will let you choose the right replacement and ensure the new handle is properly fitted.


Once you've identified the kind of window handle you require, it's time to start shopping. There are a variety of styles and finishes available, so take your time to find the one that is perfect for your home. The right handle will ensure that your windows are as secure as they can be while also adding a a touch of elegance to your home.

Installing the handle is simple after you've found it. The process is similar to the removal of the handle that was previously used, but ensure that you follow the directions carefully to avoid any problems. When installing the new handle, make sure that it is in an unlocked position and line up the spindle hole with the existing screw holes. Once the handle has been installed, screw it into place, and then replace the screws.

You may need to trim the spindle of an older uPVC window prior to installing them. This can be accomplished with either a handsaw or angle grinder. Be sure to wear goggles and gloves for security.

After you have installed the new handle, you can test it to make sure that it works just as it should. When you're confident that everything is working properly then put the screw caps back on and enjoy your new uPVC window handle.

The majority of homeowners can change the handle on their windows. With a little planning and careful execution, you will get your window handles looking and functioning like new in no time! If you find that your uPVC handles are damaged Replace them as quickly as possible to ensure the safety of your windows and to prevent further damage.