Replacing Window Handles

The replacement of window handles can improve the look of your home while also increasing security. It's important that you use the right handle and lock for a successful installation.

Start by measuring your window's width three times, then note the smallest measurement.

How do you replace the window handle

Switching the handle on your window is a simple task that can be completed in a matter of minutes. With the right tools, you can install your new handle up and running quickly and safely. The trick is to pinpoint the issue and ensure that the new handle is the correct size for your window. After the handle is installed, it is crucial to test it and make sure it works as you it was intended.

The first step to replace the window handle is to take the old handle from your windows. This can be accomplished by making sure that the window is in an unlocked position, then removing the screw caps on the opposite side of the handle. After removing the screws, you can pull the handle away to get access to the two screws which hold it in place.

You'll need to determine the length of the spindle of the handle, and then purchase a replacement with the same length. This measurement relates to how much the spindle sticks out from the base of the handle and the amount of the spindle that fits into the window frame. Consult a professional if you are unsure of how to measure spindle length. They will be able give you a precise measurement.

Once you've measured the length of the spindle and obtained the replacement, you are now able to put in the new handle. To do this, you will have to make sure that the window is in an unlocked position. Then, line up the handle with the screw holes. Once the handle is installed then you'll have to install and tighten the screws.

While this is a straightforward process, it's important to follow the instructions carefully. If you don't, you could end having an unsecure handle secured or functions as it should. Before replacing the handle, you should be sure to determine whether there are any other problems with your window or its operation mechanism. A common cause of broken window handles is the wearing down of the mechanism that operates them over time. In this case, it is usually not necessary to replace the handle instead, it is the operator.

Identifying the issue

There are many factors that can cause a window handle to stop working. It could be that the handle has fallen off of the window and can be repaired by simple steps. Alternatively, it could be that the gears in the handle have worn out and need to be replaced. This can be done by removing the handle to check for indications of wear.

This is a serious problem, as the locking mechanism, not the handle, is the reason. This is a more serious issue because it blocks the window from opening from the inside. It can also make it difficult for someone to gain entry through the window.

Another common reason for windows that don't open is that the splines of your crank operator shaft have been stripped. You can test this by turning the handle to determine whether there are any signs of wear on the the crank operator shaft. If they are, then you'll need to replace the crank operator. You can purchase them from the internet or in your local hardware store or home center.


A window that won't open is often caused by the crank handle not being "nested" inside the cover of the operator. This is usually caused by dust, dirt and rust that have accumulated over time. It may also be due to the handles not having been lubricated. In most cases, this is a relatively simple fix that involves an extended setscrew (available at home centers and hardware stores).

It is also important to know that the handles used on uPVC window types can differ. This is because the handles are made in different ways by different manufacturers and this can result in them being slightly different in terms of size. This means that you must ensure that the replacement handle is the right size for your window and lock, and this can be accomplished by taking measurements of the distance between the screw holes in the handle base.

Identifying the new handle

Before you put your new handle into place, you must ensure that you choose the right kind of handle for your window. Not only will this make sure that your windows are safe and safe, but it will also ensure that the handle fits correctly and operates smoothly. When selecting the right handle, you should take into consideration the design size, the lock mechanism and the size. It is also important to take into consideration the long-term durability of the handle as it's not unusual for handles to become damaged over time.

The cockspur handle is a common handle on older uPVC windows. They have spindles that pass through the handle's base and into the gearbox within the window frame. When you turn the handle it turns the mechanism inside and opens the window. Cockspur handles are simple to use and are a great option for security because they can be locked with keys.

The espagnolette handle is another type of handle that is employed on modern uPVC Windows. These handles are found on tilt-and-turn windows. When you open the windows, you can either extend the operating arm to move it or turn it with a crank. Espagnolet handles are usually secured by a multipoint locking system that offers additional security.

You must check that the handle you choose has the correct height for step if you are replacing a handle made of espagnolette. This is the distance from the nose's base up to the screw. Various step heights have been employed over the years, but 21mm is typical for uPVC windows and 9mm is the standard for windows made of aluminum.

It's time to begin. Remove the handle that was previously used by removing the window using the help of a screwdriver. You'll have to work in a well-lit space since some screws are difficult to see. If you're having difficulty getting the screws out, try turning the handle 90 degrees, and then looking for little stickers or caps that cover the screws. Once Repair My Windows And Doors 've removed the old handle, make note of the length of the spindle at its base to allow you to buy a new one with the same spindle length.

Getting started

When it comes to replacing a window handle there are a number of different options to choose from. The first step is to determine the type of handle you need. This will help you select the correct replacement and ensure that the new handle fits properly.

After you've decided on the type of window handle is best for you, it's now time to look around. There are many different types and finishes, so make sure you find the one that is perfect for your home. The correct handle will make your windows as secure as they can be while also adding a an elegant touch to your home.

Installing the handle is straightforward after you've found it. The process is similar to taking out the handle that was previously used, but make sure you follow the steps carefully to avoid any problems. When you are installing the new handle, ensure that it is in the unlocked position and align the spindle hole to the holes for screws already in place. Once the handle has been installed, screw it into place, and then replace the screws.

If you have an older uPVC window you may have cut the spindle to size prior to installing it. You can use a handsaw or an angle grinder, to do this. Wear safety glasses and gloves.

You can test the handle following installation to ensure that it operates just as it should. If you're certain that everything is working properly then put the caps back on and enjoy your brand new uPVC window handle.

Most homeowners can replace the handle on their windows. With a little planning and careful execution, you will make your window handles look and functioning like new in a matter of minutes! If you discover that your uPVC handles are damaged Replace them as quickly as possible to keep your windows safe and to prevent further damage.