How to Repair Broken Car Keys

If your car keys break you'll need a solution quickly. You can wait for a replacement from the dealership, but that is difficult to do. Or, you can locate a different method of getting around.

You may try some DIY fixes however, only if have the right tools. These include needle-nose pliers and penetrating oil.

Assessing the Damage

It's a nightmare to drive off and discover that your ignition key is damaged. It's a problem that can occur to anyone, and can be a stressful experience if you're in the rush to get to your destination.

Take a deep breath and don't panic. Being calm will allow you to make rational decisions and avoid further damage.

Examine the broken key again to determine which components are still intact and how much of it is inside the lock or ignition cylinder. Spray WD-40 or other oil on the area in the event that the broken piece is in the lock. This will loosen the piece and make it easier to remove it. If the damaged part is in the ignition it is necessary to remove it with an instrument that is specifically designed for this purpose, known as a key extractor.

If the key is in the key ring, try to bend it back into place by using pliers. This is a challenging task, especially when you have a crack near the connector. If you're unable to bend it back into position, use a paperclip and pull straight outward.

If you try to force the key in the ignition, it will cause more damage. It may become impossible to remove. If you're not able to remove the broken key, it's recommended to seek out a professional locksmith, or visit your local car dealership.

There are a variety of hacks online that claim to fix a damaged car key, but some of them can actually make the situation worse. For example, trying to remove a damaged or broken key with a screwdriver can force it into the ignition and even cause damage to the lock. To avoid this, you should never insert anything else into the keyhole other than a specific tool designed for removing keys from cars.

Remove the broken piece

A car key is delicate and may break inside the ignition with the slightest bump or over use. This kind of issue could be difficult to fix without the assistance of a professional locksmith. You could cause more damage by attempting to fix the broken key. Super glue or other hacks should not be used as they are difficult to remove and could cause further damage to the ignition cylinder.

It is also a bad thing to use a magnet to remove the broken key. Magnets can damage the electrical components of the ignition cylinder and make it more difficult to get the damaged key piece out. Another mistake that is common could result in a damaged key. This is when you apply too much force or make abrupt movements to turn the car key.

If the key fragment remains exposed and visible the pliers or tweezers could be used to grasp it and pull it out. If the key is stuck in the ignition but not visible, a tiny hacksaw blade or other tools with a thin profile can be inserted into the ignition to catch the edges of the broken car key and then pull it out.

Another option is to use penetrating oil to help lubricate the keyhole and decrease friction. If you apply the oil and allow it to sit for a few minutes, it can aid in the removal of the broken key fragment. If car key remote repair does not work, you can employ a key extractor to remove the broken key fragment from the ignition.

If the key has completely broken in the ignition, a locksmith is required to cut a replacement. A locksmith will reassemble all components and employ the template to make a key that is as close to the original as is possible. This assures that the key works correctly and reduces the risk of misalignment within the lock or ignition. This could cause further issues that require costly and lengthy repairs. It is recommended to regularly inspect and replace the keys on your car to prevent them from getting worn or damaged to the point of breaking.

Removal of the Broken Blade from the Ignition

If you're fortunate enough to still have the key piece Don't force it into the ignition, or you could cause further damage. You can use any tool you own to remove it safely.

In this situation, tweezers are a lifesaver. They can grasp onto the broken piece of car key and help pull it out. You can also find dental picks, which are thin pointed tools that could be useful. You could also try a coat hanger made of wire that fits into the lock. You might try tapping the metal against the surface to loosen the key that is broken.

Another option is to use a mini hacksaw blade, that you will typically find in hardware stores. This is thinner than a screwdriver, and can be inserted into the lock to hold to the broken car key. This might suffice to get it out without damaging the ignition. remote key fob repair can also try using thin needle-nosed pliers that will connect to the broken car key. If you're considering an instrument such as this, be sure you keep acetone and cotton swabs handy to get any glue from the tip of the pliers after you've removed it.

It's not a great idea to use magnets to take out a damaged car key. Magnets aren't designed to be used near the ignition, and could cause further damage to the electrical components within. They can also push broken key fragments further into the ignition, making it harder to remove them.


After you have removed the key, you should check the ignition for visible signs of damage. If remote key fob repair do notice any cracks or bending you should contact an expert locksmith. They can replace the keys with no damage to the ignition of your car. They can also offer suggestions on how to prevent further damage. The two pieces of your damaged car key will help them understand the original form of the key, and also help them make a precise copy for you.

The process of getting a new key

There are a few things you can do when your car key breaks. It is important to remember to never force a broken key into an ignition or lock. This could cause more damage and lead to costly repairs. It is recommended to call a locksmith for a professional repair.

If your plastic top isn't completely broken, you can try wrapping it in clear tape to provide support and prevent further breakage. Super glue is another alternative. To achieve this, you'll have to clean the broken pieces before applying the smallest amount of super glue. After the glue is dry, you can try to press the pieces together and hopefully your key will work.

Alternatively, you can call the dealership for a replacement key. This is a great alternative because it's a way to ensure that you get an exact match to your vehicle and that the key is linked to the vehicle. Usually this will cost you more than a locksmith service, but it may be the most efficient and most efficient solution to your issue.

A professional locksmith will also be able to supply you with a spare key, which is useful in the event of an emergency. You can also lower the possibility of your key breaking down in the future by taking care of it with an appropriate key protector, and having a plan for emergencies.

A broken car key can be very frustrating, especially when you attempt to start the car and discover that it isn't turning over. DIY fixes could backfire, and lead to misalignments that could damage ignition systems as well as locks. If you put your key in the ignition, it can cause damage to the battery of the keyfob or cause issues that require expensive repairs. For these reasons, it is best to seek a professional solution. A professional automotive locksmith will quickly and easily solve the issue without causing damage to your vehicle or causing further problems.