How to Repair Broken Car Keys

You'll need a quick solution when your car key breaks. You can either wait for the dealer to give you a new key, which is inconvenient, or you can find other options to get around, like using public transportation or asking friends to take you around.

If you have the proper tools, you can do some DIY fixes. You can apply penetrating oil and needle-nosed pliers.

Assessing the damage

It's frustrating to be about to get into your car and discover that your ignition key is damaged. It's a common problem that can strike anyone, and can be extremely stressful when you're in a rush to get to where you need to be.

Take a deep breath, and don't panic. If you're calm, you'll be able to make more informed choices and avoid further damage.

Examine the key that was damaged to determine which parts are still intact and how much is inside the ignition cylinder or lock. If the damaged part is in the lock, you can spray a lubricant such as WD-40 on the area to loosen it up and make it easier to take it off. If the damaged part is in the ignition you'll need to take it out by using a special tool called a key extractor.

If the key is still in the ring, you may try to bend the key back by using pliers. This isn't easy, especially if the break is near one of the connectors. If how to repair car key fob are unable to bend it back into place then you can use a paperclip to grab the end of the key and pull it straight outward.

If you try to force the key into the ignition will cause more damage and make it impossible to remove. If you are unable to get rid of the damaged key, it's best to call a professional locksmith or visit your local car dealership.

Many different hacks are available online which claim to fix broken car keys, but certain methods can make the situation worse. For example, trying to remove a broken key with a screwdriver may push it deeper into the ignition and can even cause damage to the lock. To avoid this, you should not put anything else in the keyhole besides a special tool that is designed for removing keys from cars.

Removal of the damaged part


A car key is fragile and can break inside the ignition after a the slightest bump or over use. This kind of issue could be difficult to fix without the help of an expert locksmith. Attempting to repair the broken key on your own could cause more damage. Super glue or other hacks should not be used because they are difficult to remove and may cause further damage to your ignition cylinder.

It's also a dangerous option to use a magnetic to remove the broken key. Magnets can harm the electrical components of the ignition cylinder, making it more difficult to get the damaged key out. Another common error could result in breaking the key. This is when you apply too much force or perform sudden movements to turn the key of your car.

If the key fragment remains visible and exposed, pliers or even tongs can be used. If the key is stuck in the ignition and is not visible, a small hacksaw blade or other small-profile tool can be inserted into the ignition to catch the edge of the broken car key and then pull it out.

You can also apply penetrating oils to reduce friction and lubricate friction in the keyhole. If you apply the oil and allow it to sit for a few minutes, it will help in the removal of the broken piece of key. If the oil does not work, you can try using an extractor for keys to remove the broken key fragment from the ignition.

A locksmith will need to replace the key if it is completely broken in the ignition. A professional locksmith will reassemble all the parts and use them as a template to create the new key which is as close as possible to the original. This guarantees that the key works correctly and reduces the risk of misalignment in the lock or ignition. This could lead to more issues that require costly and costly repairs. It is recommended to regularly check and replace keys for cars is recommended to stop them from becoming worn out or damaged.

Removing the Broken Blade from the Ignition

You could cause more damage if you force the key into the ignition. You can use any tool you have at home to take it out it in a safe manner.

Tweezers can save the day in this scenario. They can grasp onto the broken key from a car and help pull it out. You can also find dental picks, which are thin pointed tools that could be used. You could also try coat hangers made of wire, that is flexible enough to fit into the lock. You can try tapping the metal against the surface to loosen a broken key.

Another alternative is to make use of a mini hacksaw blade, which you can usually find in hardware stores. This is thinner than a screwdriver and it is able to slip into the lock to latch onto the damaged car key piece. This could suffice to get it out without damaging the ignition. You can also use thin needle-nosed pliers to attach to the damaged car key. If you're trying a tool such as this, be sure to keep acetone and cotton swabs available to take any glue that is on the tip of the pliers once you've pulled it out.

It is not a good idea to use magnets to take out a damaged car key. They shouldn't be used close to an ignition as they could damage electrical components. They can also push the broken pieces of the key deeper into the ignition, making it more difficult to remove them.

After you've taken the key out and you're ready to inspect the ignition to determine whether there are any visible signs of damage. If you find cracks or bends it is recommended to contact a professional locksmith. They can provide key replacement services that don't damage your car's ignition. They can also provide advice on how to avoid further damage. Keep both pieces of the broken car key. This will help them to comprehend the original shape, and also create duplicate keys for you.

How do I get a new key

There are a few things you can do when your car key is broken. It is crucial to remember to not force a damaged key into the ignition or lock. This could cause further damage and could result in costly repairs. It is best to call an expert locksmith to make a repair.

If the plastic top of your key isn't completely broken You can wrap it with clear tape to provide support and stop further damage. Super glue is another alternative. To do this, clean the broken pieces and apply a tiny dab of super glue to each. After the glue has dried you can attempt to press the pieces together to try again and hopefully you will be able to get your key working.

Alternatively, you can call the dealership for a replacement key. This could be a good option because it will ensure that you have an exact match to your car and that the key is paired to the vehicle. Typically this will cost you more than using a locksmith service, but it may be the most efficient and most efficient solution to your problem.

A professional locksmith can provide you with an extra key that could come in handy if you encounter an emergency. You can reduce the chances of your key breaking by taking care of it, by using key protectors, and having an emergency plan.

A damaged car key can be frustrating, especially when you are trying to start your car only to find that it won't turn over. DIY fixes could backfire, and cause misalignments that can damage ignition systems as well as locks. If you put your key in the ignition, it could cause damage to the battery of the keyfob or cause problems that require costly repairs. It is recommended to speak with a professional for these reasons. remote car key repair near me for automotive can quickly and easily solve the issue without causing damage to your vehicle or causing any further issues.