Double Glazing Repair Near Me

Double-glazed windows and doors enhance the value of a house but over time they may be affected by issues that require fixing. These include problems such as condensation, mist, or draughts.

Double glazing that is distorted is not difficult to fix. A technician will first remove the window pane, then pipe hot air into the gap, and then seal the gap.

1. Broken Panes

A window that's cracked can pose a risk to your safety that allows in shards glass that could injure you if you're not careful. It's also a vulnerability in your home, allowing air escape and defeating the purpose of double-pane windows to provide energy-efficient barriers for heat and cold. It could also increase your heating and electric bills, especially if it's in an upper-level window.

A double-paned window is fixed by a rubber gasket and metal or plastic mouldings. It's simple to replace one or both of these parts, which will ensure that the remainder of the window in good condition. However, if the glass itself is damaged it can be more difficult to fix because you may be unable to find replacement panes that match your frame exactly.

The first step is to take away what remains of the old glass and re-glaze it. Wear gloves that are thick and move slowly to prevent cuts. You'll need to scrape up hardened glazing compound, and then take out the glazier's facets that hold the glass to. These can be removed with a utility blade, scraper, or chisel. After you've removed the old glass as well as the points of the glazier, measure the opening to fit the new pane. To ensure a snug fit you should subtract 1/8" from both the height and width. You can cut the new pane yourself with glass cutters or ask for it to be cut at an hardware store. Clean the wood that is bare around the frame and coat it with primer before you apply the new glass.

If you're looking for a permanent solution, masking tape will hold most superficial cracks in place for a little while. But it will not stop a damaged window from developing deeper cracks, or even breaking down completely as time passes. To get the best results, use a heavy-duty masking tape and extend it beyond the cracks on both sides the window.

If both panes of glass are broken, the only way to repair them is to replace the entire window. Based on the type of break, this can be done either inside or from outside, but it's safer to remove the sash and work from there.

2. Seals

The double glazing's insulating benefits are enhanced by windows sealed with. It seals off the airspace that is filled with inert gases as well as the uPVC frame that sits between the multiple panes of glass. If the seal fails or develops issues your windows will begin to get smudged and will cease to function.

Window seals aren't too expensive to replace and can be done quickly and efficiently by a professional installer, avoiding the need to remove and replace the entire window. In reality, it's cheaper to have a double-glazing repair near me specialist reseal your windows than to replace them.

Re-sealing your windows can also reduce condensation on the panes. This isn't just unattractive, but it could cause damp problems within your home. Moisture can rot floors and walls, and it's known to cause health issues, such as asthma. It can also damage furniture and carpets, so it's crucial to take care of the problem promptly.

It is possible to prevent the buildup of moisture by cleaning your windows regularly with household cleaner. However this isn't always enough. The best solution is having your seals repaired or changed when they are deemed to be defective. The good news is that many reliable companies will provide this service at no cost or at the cost of a small fee.

The most commonly used method of resealing is to use silicone caulking. This will fill any gaps between the panes and restore their integrity of the window. This is an easy and quick way to repair double-glazed window, so you will soon be able to benefit from your windows once more.

3. Mist

Mist is a typical problem that can affect windows with double glazing and older frames made of aluminium. It is caused by the difference in temperature between the outside and inside of a window and causes condensation to form. The good thing is that mist can be removed easily. Many companies offer to drill holes in the windows and then inject a special drying agent. This can cost up to PS45 plus VAT but is only a temporary fix because the moisture will return within six months.

Another option is to make use of a hairdryer to evaporate the droplets of water that are trapped in the gaps between the double glazing. This technique can also work however it must be carried out from an appropriate distance to avoid melting the seals. A dehumidifier is a good option to resolve this issue. Opening your windows regularly and ensuring that your trickle vents are open can also help to prevent condensation from developing.


It is important to remember that if you do have newer double glazed windows, they'll likely still be under guarantee and the company that installed them should rectify any problems at no extra charge. Make sure to check this before undertaking any DIY repairs. Any modification or alteration of the sealed units may cause a warranty to be void.

In some cases the best option is to replace the entire window unit. This is usually cheaper than replacing the frame and comes with a 10-year warranty. It is also worth checking the costs of multiple glaziers and the prices they charge for their services, as some may be offering discounts for multiple windows.

If you're having trouble finding an expert to complete the repair of your double glazing near me, then why not make use of the online services provided by HouseholdQuotes. Our system will connect you with verified and registered professionals in your locality who will provide quotes for the work that is required. window and door repairs near me can select the glazier that's best for you.

4. Draughts

The most common problem reported by owners of double glazing after installation is that windows become difficult to open and close. This could be caused by various issues that range from hinges that aren't fitting properly (which can be fixed by using WD-40), to the interlocks not fitting together when the windows are closed. Most often, this is due to wear and tear, dirt or dust, but when the hinges aren't aligned correctly then this can be a sign that it's time for an upgrade.

Draughts could be caused by faulty or damaged seals that allow air to enter the house and heat to escape through an opening. Weatherstripping, which is purchased from most home improvement stores is a foam strip which is used to seal around the windows' frames. It will stop heat and air from escaping. But, this is only an interim fix and must be replaced every year or so since it doesn't provide any real insulation.

Double glazed windows can be professionally protected from draughts. The sash is removed from the frame and the glass unit is removed. The frame is then replaced with the new IGU purchased from the manufacturer and the window is reassembled. This will not only stop draughts, but will also increase the energy efficiency of your house.

Whether your windows need a quick fix or require repairs that are more extensive and replacement, finding the right person to complete the task will be easy if choose a reliable online portal such as Checkatrade. You can search for local traders who have been assessed by experts in the industry. This will ensure that the work is carried out to the highest standards.

In certain situations, it might be possible for you to replace your windows with energy-efficient designs. This can reduce your heating expenses and boost your property's value. If this isn't possible, draught-proofing your double glazing can help keep your home warm and quiet while saving money on energy costs.