Choosing Replacement UPVC Window Handles

It is essential to select the right replacement if your uPVC handle is damaged or worn. This will increase the security of your home.

There are a variety of things to consider when choosing a replacement handle for your double-glazed windows. The first step is to determine the kind of handle you have.

Cockspur handle

It is easy to replace the handle of your uPVC windows if they are damaged. It is crucial to identify the type of lock and handle you have so you can find the correct replacement for it. Also, you should test the spindle of your old handle, which will aid in determining the size of the new one you require.

The most popular type of uPVC handles are Espag handles, which have an internal spindle that slots into the locking mechanism in the window. The handle can be found on both modern and older uPVC windows. To install a new handle, you'll need to remove your current handle. This requires removing pins and grub screws based on the type of handle you have.

Another type of uPVC window handle is the Cockspur handle that has a nose that closes onto the wedge-shaped block of the window frame. This type of handle is usually used on older uPVC windows and is not as secure as the Espag handle. If you are replacing the Cockspur handle it is crucial to take the step height into consideration to ensure that the replacement is the right size.

The next one is the inline Espagnolette that has straight lines and is suitable for windows that are tilt and turn. The most common type of handle that is in this design is the "Espag" handle that has a 38mm gap between the centres and can be used on windows with tilt and turns or as an inner door handle. The Espag handle comes with a wide range of height and nib options for various applications. Some Espag handles have an internal locking mechanism that can add security to your home. RepairMyWindowsAndDoors is an excellent option for homeowners who want to increase the security of their windows but don't want to invest in multi-point locks. The mechanism for locking the Espag handle operates through a shoot-bolt rod that is attached to a locking box, that provides the ultimate security.

Espag handle

The Espag handle, also referred as the espagnolette window handle, is an important component of your double-glazing system that can help you secure your home. It is a multipoint locking system which includes shoot bolt rods as well as a lock gearbox to provide absolute security. The handle is operated by a spindle located at the rear of the handle. It can be installed on uPVC, aluminium and timber windows. It is available in different styles and can be non-locking or locked, based on your preferences.


The handle is usually secured to the frame using screws or pins. Find them and remove them with the help of pliers or a screwdriver. Next, slide the spindle at the back of handle into the lock mechanism on the window. Once you have the handle in place, you can screw it into the frame and replace any screws or pins that were removed from the previous handle.

When replacing your handle, it is crucial to determine the type of handle you have and determine the spindle's length accurately. This will enable you to choose the right replacement handle. If your new handle is tilt and turn, you'll need to make sure that the spindle of the handle is long enough to control your window's tilt and turning mechanisms.

You can easily replace uPVC window handle yourself once you have the right tools and a good knowledge of the kind. Make sure you take your time and take care to be safe when working with windows and tools. You should also test the window handle to make sure it functions correctly before you secure it in the correct position. This can be done by opening and shutting the window over and over. If it is difficult to open and close the window, it could indicate that it needs additional tightening. Also, you should look for signs of wear that could cause the handle to snap. These tips can assist you in replacing your uPVC handles and improve the security of your home.

Tilt and Turn Handle

If a uPVC window handle is broken or is not functioning properly the handle can be replaced in a few easy steps. It is important to identify the type of handle and measure the spindle size. Different handles are available in a variety of sizes. Using the correct tools and taking your time can help you complete this task much more easily. It is important to always ensure safety when working with windows and tools.

The base of the handle can be used to determine the type of handle. In most cases, the handle's base is fixed to the frame using a screw or pin. If this is missing, then it could indicate that the handle is separated from the base and should be replaced. The handle should be crafted to fit the type of window it will be fitted to. This is especially crucial as various handles are designed for casement or awning windows, and there are usually variations within the different types of handles.

To replace a uPVC window handle, first take out the old handle from the window. Then look for screws above or below the handle. Then, make use of a screwdriver for taking them out. If there aren't any screws, just use your fingers to remove the handle from the window. Verify whether the screws or pins are secure and tightened after removal of the handle. Then, you can replace the handle and screw it into place. It is a good practice to replace the caps on screws and then test the handle after it has been repaired.

It is essential to select the correct replacement upvc handle for your window. It's also a good idea to choose the right handle to match your window's colour. This will give the room a more modern appearance and will help to improve its overall appearance. It's also a good idea to buy an item with a lock, so that you can lock it once the window is closed.

Crank handle

uPVC Windows can wear out over time. They provide insulation and security for your home. The handle mechanism that is used to open and close the window may break and require replacement. Fortunately, replacing the old uPVC window handles is a fairly easy job that can be done by anyone who has the right tools. It is crucial to identify the type of window handle and lock before attempting a replacement, because various models require different methods.

Make sure that the new UPVC window handle is the right spindle length. This is the part of the handle that connects the locking mechanism to the frame of the window. This can be determined by taking the handle out and measuring it from its base to the tip. The handle's spindle should be exactly the same length as the screw that secures the handle to the window.

Take the handle off by removing its plastic oval. Then, take off the square metal bar from the window that is inserted into the handle's internal square drive. The screws that attach the handle to the frame of the window will be revealed. They can be removed using a flat-head screwdriver. Once these have been removed, you will need to replace the cockspur block and grub screws. Then, reinstall the handle.

It could be that the handle is loose because of the handle not being aligned properly. The window handle is held by a pin or screw that is inserted into the handle. The handle is then secured using a screw or pin on the front. The screw is hidden when the window in closed position and can be accessed only by opening the handle.

It is essential to tighten all screws prior to installing the new UPVC handle to stop them from loosening with time. Check the window handle regularly for signs of wear and lubricate it regularly. Keep your windows and window handles in good shape to ensure they function smoothly and look beautiful for many years.