Upvc Door Handle Repair

Door handles made of upvc are notoriously tough, but even the strongest materials will succumb to wear and tear over the course of time. If your door handle made of upvc feels floppy and loose, you may need to tighten the screws or grease the mechanism within it.

You may want to hire a professional door handle repair service if are concerned about security or lack the necessary equipment.

Tightening Screws

If your upvc handle comes loose the first thing you should do is tighten the screws that hold it in place. It is crucial that the screws are tightened so that the handle is able to support the weight of the door and prevent it from being pulled by an intruder.

Over time, the screws that hold your door handle made of upvc may be loose because of wear and tear. This can cause the handle to fall off the spindle, creating a security risk for your home. Regular inspection and maintenance is essential to ensure the handles are secured properly to ensure they continue to perform as they should.

Depending on the type of uPVC door handle you have There are various screw configurations. Top Screw Above and Bottom Screw handles have a screw at the bottom and top of the handle plates respectively. Lever Pads and Level Pads tend to be shorter, and have one screw located under the handle. If you are considering changing your uPVC handle, it might be beneficial to switch to a higher security set of handles since these are Sold Secure SS301 or 2* Kitemark approved to enhance the security of your home.

Your uPVC door handles are exposed to elements and harsh environmental conditions that could cause damage over time. Be sure to check them for signs of wear and tear, if you notice physical damage it is best to act quickly because this could affect the function of your uPVC doors and windows.

Rust and corrosion may also cause damage to your uPVC at unexpected times. If you notice any corrosion or rust, it is recommended to get your uPVC handles replaced as soon as you can to maintain the safety and security of your property.

If you find that your uPVC handle is loose or sloppy, it's best to get an expert locksmith to fix it. This will ensure that the handle does not cause further damage or compromise your property's security. Locksmiths will employ special tools to open the door without causing additional damage to the mechanisms of the handle. They will then remove the spindle and handle and replace them with the new ones.

Inspecting the Spindle

If you are replacing the handle, it is a good idea to inspect the spindle that holds it. The spindle can come loose which causes the handle to shift or become loose. This can be prevented by checking the screw on the top of the handle.

If the handle seems to be sloppy, this could be a sign of a problem with the internal mechanism in the lock case. This can happen when the mechanism has worn out over time or if it's not properly installed. It is typically repaired by lubricating the handle and door however in some instances it may be necessary to replace the gearbox.

It is also essential to ensure that the transfer of movement from the handle onto the latch follower is working as it should. If this is not the situation, it could mean that the screws have been overtightened or the handle backplate isn't positioned correctly against the door face. It could also be that the hole used to mount the spindle is misaligned with the latch follower, and it can be fixed by altering the hole.

These small tasks of maintenance will help keep your uPVC doors in good condition and avoid any further damage. Leaky handles could cause damage to the handle, and cause security issues. This can be prevented by regularly checking and tightening the screws. It should form part of your routine maintenance schedule. This will ensure that your uPVC doors function properly and efficiently for a number of years. A well-maintained uPVC door is a major benefit to your home. Therefore, be sure to take a few moments out of your day to perform these simple check-ups! You'll be grateful you did.

Replace the Spindle

As time passes, the grip of a door handle on the door may become loose. This can be caused by various reasons. Extreme weather may cause the door to expand and contract, putting pressure on the internal mechanism and making the handle loose. Handle springs can also lose tension, limiting movement. A broken lock cylinder may hinder the handle from functioning. Regular inspections and lubrication can keep these components working smoothly.

If the door handle of your upvc has become floppy and won't hold, it may be necessary to replace the spindle. This is an easy task that will require only a screwdriver as well as some common tools. However, if your door handle isn't easily accessible or the job is more complicated it is possible that professional assistance is needed.

To replace Repair My Windows And Doors Links to an external site. must remove the handle levers from the backplate and unscrew the screws (be cautious not to lose any). The spindle should then be removed. The spindle is then fitted with a shim to fit the hole in the plate and a circlip which holds it. The handle is then put back on the plate using washers.

Conducting a regular check and maintenance of your upvc doors and handles is essential to ensure that they are operating properly. Maintaining the uPVC handles and doors in good shape not only improves the appearance of your home but also improves its functionality and security.

It's crucial to fix the issue quickly in the event that your uPVC handle isn't working as it should. If you don't take care of it and it's not taken care of, it could cause damage or even loss of function, and make it difficult to secure your home. For more information on repairing or replacing your uPVC door handle, get in touch with a professional locksmith. They can give you expert advice on which door handle is ideal for your home and the best way to install it. They can also provide a guarantee for your new handle, which gives you peace of mind.

Replacing the Handle

Over time the uPVC handle of your door can be loose. This is normal, especially if your doors have a tendency to open and closing. It is possible to fix the problem by tightening the screws that secure it. In some instances it is necessary to replace the handle if it's broken or no longer fits correctly. This is best handled by an experienced locksmith.

Making changes to a uPVC door handle does not have to be difficult. A few easy steps will enable you to finish the task in a short time.

Make sure that the handle is the right size for your uPVC doors prior to starting. This can be accomplished by measuring the distances between screw-hole centres and the lever and keyhole dimensions. Once you have the measurements, you can order replacement uPVC handles that are precisely the proper dimensions.

When replacing your uPVC door handles, make sure to select high-quality products. This will ensure that the handles last and provide you with the security you require. It's also important to wash the area around the handle frequently to prevent dirt or debris from causing damage.

One common cause of a loose uPVC door handle is the misalignment between the lock mechanism and the handle. If the lock mechanism is not in alignment with the handle, it may result in the handle becoming stiff or difficult to operate.

Another common cause of a damaged uPVC door handle is lack of lubrication. If not lubricated properly, internal springs and mechanisms can become sticky, making it difficult for the handle to operate smoothly. Apply lubricant made of silicone to the handles and locks of your door to help them lubricate.


Even for beginners, repairing doors with handles made of uPVC can be an easy and quick job. With a few simple steps, you can spare yourself the expense and hassle of replacing your uPVC handles. If the issue is too significant to solve by yourself or if your safety may be at risk it is recommended to contact a professional to handle the task.