Double Glazing Window Repairs

Getting your double glazing window repairs carried out will ensure that they function properly and save you money on heating costs. A professional will make use of specific tools and will know how to complete the task properly.

They can also provide advice on the latest energy-saving technology. The majority of windows with double glazing are covered by a guarantee of 10 or 20 years, but some offer lifetime warranties.

Broken Panes

Cracks in double-glazing are not only unsightly, they also create a barrier that allows cold and heat to enter or leave your home. The good news is that most broken panes are repairable without replacing the entire window. To stop the crack from spreading, tape the area with masking or packing tape. Extend the tape past the edges of the glass on both sides. You can also cover the area using plastic, like garbage bags, tarps or tarp, to block bugs, rain and other animals.

Then, remove the glass from its frame using an utility knife and a pair of gloves. Make sure to take the glass out in one go, rather than breaking it into small pieces. It's also important to be cautious in case any pieces that break could fall and break more. It is essential to recycle old glass in a proper manner.

After removing the old window, you will be required to take measurements of the opening of the new window. Be sure to measure carefully and remember that wood expands or contracts over time. It's usually best to subtract 1/16 to 1/8 inches each way from the measurement to ensure that the new glass is fitted snugly. Then, you'll need a piece of double-strength glass cut to these exact dimensions, and then purchase enough glazier's clips or glazier's points to be installed every 6 inches around the edges of the windowpane.

repairmywindowsanddoors.co.uk will drill a series of holes in the window to expel any moisture, and then apply a specific liquid sealant to the gap. This creates a waterproof barrier, keeping your home warm and dry. The process can take anywhere from just a few hours to a few days, and it's important to let the sealant completely dry before proceeding.

While some double-pane windows can be repaired using this method however, it's generally recommended you replace the window if you're experiencing condensation, draughts or any other problems that can't be solved by drilling or taping. Additionally, since special tools are required to perform the repair properly, it's not always a good idea to attempt the repair yourself unless you're an experienced DIYer.

Condensation

Condensation can be a problem when the humidity or temperature of a room changes. It forms water droplets on cold surfaces. It can become trapped between double-glazing if the seal fails. The good thing is that it's not usually an issue, but there are some options to try before calling in professional window repair specialists.

Make use of a hairdryer with low temperature and at an appropriate distance to evaporate any moisture that's trapped between your windows. But, this is only a short-term solution and will not stop condensation from occurring in the future, unless you address the cause of the issue. The best solution is to ensure you have enough ventilation in your home and that you balance humidity levels. This will help you save money and decrease the risk of damp and mould developing around your window.

A defogger is another way to combat condensation. A small hole is made in the double glazing and then a cleaner solution sprayed into it. This is a way to remove moisture from the air. This is only a temporary fix and won't guarantee the elimination of condensation over the long run but it could be an economical alternative until you can get your window repaired professionally.

Visible condensation could be an indication that the sealant between the double paned windows has failed. If you notice this it's essential to call your double glazing provider immediately and get any issues addressed in writing. It will be easier to claim your warranty if it becomes necessary later on.

You could also try lubricating any hinges, mechanisms or handles on your double-glazing to see whether this aids. You could also try using a dry, clean cloth to wipe off any haze that could be present, but keep in mind that this won't solve the root issue - the lack of a dry and clean space between your windows. If you're not able to resolve this issue, then replacing your window might be required.

Draughts

There's nothing more annoying than a cold breeze coming through your double-glazed windows and can make your entire home feel cold, even though the rest of the house is warm. Luckily, most draughts are easy to fix and could save you a lot of money on your energy bills.

A draught usually comes from gaps around doors and windows. These are usually caused by poor fitting and loose plaster around the frames, rotting wood and even a lack of paintwork. Draught-proofing is an inexpensive method to lower your energy bills. It prevents warm air from leaving your home during winter and cold, cold air from entering your home during summer.

Installing draught-proofing strips is the most effective way to prevent drafts. These strips are available in a variety of materials, including brush, foam, or rubber. They can be put around the sides or bottom of the door. You can also get draughtproofing for sash and casement windows. You can add brushes to sliding windows and rubber strips to casement windows.

You can also use a draught-excluder between your floorboards. This will stop warm air from rising and creating drafts. But, this is only effective if the flooring isn't carpeted. You can also put the cover for vents to an open fire even if it's not being used and seal the gaps under sinks, around extractor fans in chimneys, and in any other unused vents in your home.

Misted double glazing is a typical issue that can be fixed quite easily by constructing an entirely new seal. Many double glazing companies offer to drill misted glass units and install a plug, but this is often a short-term solution. It is best to contact the company that installed and sold your double glazing and request that they repair the glass unit. It may cost a little more but it's less expensive than replacing the entire window.

Mist

The mist is caused by condensation between the panes of a double glazed window. The sealant that holds the glass together prevents moisture from getting out, but it can be damaged or worn down by accidental collisions or as a result of weathering and aging. This should be repaired as quickly as possible as it can cause homeowners to experience a variety of issues, including damp and mould and excessive energy bills.

There is a simple and quick solution to the problem without having to replace the entire window. Just drilling a few holes through the window unit will allow you to put in desiccant bags, which will take any condensation between the glass panes. This will solve the problem and keep your windows sparkling clean.

There are companies who will drill holes into your double-glazed units on your behalf. However, this option will be costly and requires a degree of expertise and experience to successfully complete.


In some cases it may be necessary for the window to be replaced when it has suffered serious damage, such as massive rot, or even severe cracks. This is especially the case if you wish to upgrade to Low E A-rated glass in order to improve insulation and save on heating expenses.

It is best to call the company that installed your double glazing. They should be able to repair the misting or offer you a discount on a replacement unit based on whether the unit is under warranty. For general maintenance and upkeep of your double glazed windows, it's worth periodically checking the mechanisms as well as the hinges, handles and the places where windows or doors pass through the frame for signs of wear and wear and tear. Cleaning your double glazing will also help to minimise any issues related to condensation and moisture in between the panes. If you find it difficult to shut or open your windows, try lubricating the hinges and mechanisms using grease or oil.