Double Glazing Repairs

Double glazing can keep your home warm, but it may also develop some irritating issues as time passes. This includes broken hinges locks, handles or locks and foggy glass.

The mist that forms between the glass panes of your double glazed window is usually an indication that the seal has broken down. Fortunately, this can be fixed fairly easily, without having to replace the entire window.

Frames

It is usually ideal to use frames that are already in place for double glazing. This will save you money as well as minimize disruptions in your home. However, if your frames have suffered significant damage or are at the end of their lifespan, you may benefit from replacing them with newer frames. This can be done simultaneously with fixing your windows, making it less of a hassle for you.

The condition of your frames will affect how well your double-glazing performs, since it is the part that creates an airtight barrier between your home and the outside elements. Some of the most common issues with double glazing are frames that are difficult to open, or have dropped or sagged over time. Depending on the severity of the damage, you may be able to fix this by wiping down mechanisms hinges, handles and hinges with cold water, or by adjusting screws.

You can also improve insulation by replacing your window glass and enhancing the seals between the panes. This is a relatively quick process that can be completed on-site, and will provide a permanent solution to condensation, draughts or leaks.

If your period-style windows have thin single-glazed glass (annealed glass) replace them with energy efficient glass is a good investment. It will help you save energy in your home, and aid in reducing your heating bills.

Glass


Double glazing is made up of two glass panes that have an interspersed bar of spacer between and gas or air is then trapped in the gap to create an insulating layer to stop heat loss. The system is designed to last, but the seals could break as time passes. This is often the cause of fog or moisture between the glass panes which obstructs visibility and may also cause draughts.

The good news is that a lot of these issues can be fixed easily by an expert repair service for double glazing. However, you should bear in mind that the price of repairing your double glazing will vary depending on the problem. Here are a few of the most common repairs to double-glazing:

Moisture or mist between the window panes is usually caused by the seal binding the two glass panes breaking down. In the case of double glazing repairs , the damaged pane is removed and hot air will be piped into the area to eliminate any moisture before applying the new sealant. The windows are then reinstalled with the new sealant to ensure the air is retained and your window performs exactly as it should.

The majority of repairs to double glazing are completed in under an hour, and will make your windows look as they did when they were put in your home. It's important to fix any problems with your double glazing as quickly as you can. This will prevent further damage and will help you save money. Comparing quotes from a range of double glazing companies is a great method to determine the most affordable price for your repair. You can compare several glaziers by using an online tool like HouseholdQuotes.

Locks

If your uPVC windows aren't closing properly, they can cause drafts and allow warm air to escape from your home. This could cause energy loss and weaken your home's security barrier by making it easier for burglars to gain access. This can also cause water damage if the window is not fixed immediately.

Regularly check your windows, especially the locks. Often they can get stiff and difficult to open or close and this could be due dirt or even temperature changes in your area. The best way to deal with this is to get a regular window health check by a local specialist who can find the issue and provide cost-effective, quick solutions.

Taskers first determine the kind of window they are looking for and then assess the damaged areas. They might tighten loose screws, repair crooked parts or re-mount the lock. In some instances the lock may have to be completely replaced.

Owen can replace most makes of uPVC window and door mechanisms. This includes hinges, handles, or striker plates. It could also be gearboxes, locks or hinges. He can also provide and install additional locks like jammers for sash windows that are used on older uPVC casement windows. These locks are a low-cost solution to bring older uPVC casement windows to the modern multi-point locking systems that are found on newer uPVC windows.

You can also put in key-locking uPVC window restraints to increase security and safety for children. This is helpful if your window is located in a high-risk area of the house. This will prevent windows from opening, and will require special tools to take it off and replace.

Handles

While you might think that your double glazed doors and windows are indestructible they aren't, and like any aspect of your home, they are prone to faults and damage. It's important that you get your double glazing repaired as quickly as you can, to stop it becoming worse.

Many issues can be addressed when you install the glass, saving both money and valuable time. Misting can be caused by condensation or water in the space between the two panes.

If your uPVC window handles are spongy or difficult to turn, it's an indication that they require attention. Inflexible and loose uPVC window handles can let draughts into your home, causing damage to the frames and reducing the life of the sealed unit.

The Window Wizard can upgrade your UPVC handles for doors and windows to new stainless steel handles manufactured in the UK which will give your home a chic and modern look. They are available in a variety of finishes and colours and you can pick the style that best suits your property.

Replacement UPVC window handle options are available in three different types: Cockspur, Spaded and Espag handles. Espag handles have spindles that control the lock mechanism that is built into the frame. They are typically found on the latest uPVC windows. Cockspur handles have a "spur" that hooks onto a wedge-shaped striker plate on the frame. They are commonly used on older UPVC Windows. Spaded handles are specifically designed for tilt and turn windows, and include a key operation for additional security to comply with the requirements of home insurance.

If your UPVC handles are squeaking or difficult to turn, it could be due to heat build-up or dirt in the handle. Try applying lubricant on the inside of the handle or cleaning it with warm soapy water. If that doesn't work, you can contact an individual company in your area to replace it for you.

Hinges

Window hinges and locking mechanisms are often neglected when it comes to double glazed repairs but they could cause major problems if they become loose or break. They can also cause draughts to be introduced into your home, which is why it's important to maintain them in a timely manner. In most cases, a simple oiling of the mechanism can bring them back to their original state.

Condensation between the glass panes is another common issue with double-glazed windows. Again this can cause significant problems, and in certain cases it is even possible that it can cause damage to the insulation of your property. A professional can help resolve this issue by removing the affected panel and replacing it with a replacement window that is an A-rated energy efficient window.

This kind of repair is a lot more straightforward than it may seem. It is best to leave this task to professionals who have the necessary tools and experience to do it efficiently.

Be aware that, even though it may cost more to replace your old double-glazing with modern windows however, you'll save money in the long term as modern windows that are energy efficient won't require repairs for decades. They will also save you money each day on your electricity bill. In most cases, it is a sensible choice to make when you have the funds. It is recommended to speak with an expert double-glazing business that is specialized in this type of work. They can provide you with advice and give you an estimate of the work that you need. They can even help you determine if it is more cost-effective to make repairs or replacements for your double glazing units.