How to Prevent Condensation Between Double Glazing Windows

Condensation between the window panes is one of the common problems that can cause double glazing to not perform as it should. However, a little amount of maintenance can help prevent this.

This is not something you can do by yourself, as specialized tools are required. This is a job that is best left to professionals.

Broken Panes

Double paned windows are a standard feature in modern homes. They are a great way to lower energy bills because they keep warmth inside and the cold outside. They insulate much better than single pane windows and also help to control the humidity in a home. They can be damaged and broken, and a broken window pane will need to repaired.

Repairing a double pane that is broken yourself however, it is recommended to leave the work to the professionals. To disassemble the frame and remove the broken pane, you will need special tools. Broken glass can cause serious injury when handled improperly. It's a good idea, if your window is damaged, to call an expert to fix it safely.

If a double pane is damaged the seal between the two glass panes could fail, resulting in condensation within the window. If the condensation is so intense that it leaves visible marks on the exterior of the window, then the window should be replaced to avoid further moisture or draughts.

To replace a broken double pane, the original window must be removed from the sash, and then disassembled. This is a job that is best handled by professionals who understand how the window comes apart so that they can quickly remove the sash and take out the IGU (insulated glazing unit). The IGU (insulated glazing unit) can be purchased and fitted by a specialist glass company.

Once a new pane is installed, it must be fixed with a silicone caulk around the edges of the window. This will stop water from seeping behind the putty and causing damage to your home. Once the caulk has dried, it is recommended for you to paint the putty with an oil-based primer. After that you should wait until it is dry again before applying a coat of exterior paint. By following these steps, you will make sure that your double-pane window is waterproof and secure for the years to come.

Leaking Seals


If water gets into your home via windows that are double-glazed, it can cause damage to the wall and the plaster behind it. This is an indication that the window seals are starting to fail and you should contact a professional to repair them as soon as possible.

One of the most common causes of double glazing leaking is condensation that develops between the glass panes. This can be a huge problem, especially during the winter months. However, it is generally an easy solution. A technician will clean your frame and glass before installing a gasket in order to prevent air from entering.

The window's weather seal might also be failing. This issue is common in older homes and can lead to leaks around the frame. Weather seals are typically replaced by a polyurethane solution in order to help prevent water ingress.

If you think that this is the case with your windows take a look at the warranty to determine if they're still covered by warranty. If they are, you should contact the manufacturer for replacement costs.

It is also important to ensure that the drainage section of your window isn't blocked. This could cause problems with leaks and may require clearing of debris.

Sometimes, it's not possible to repair the seals of your double glazing. In this case, you'll need to replace them instead. The IGU (insulated unit) will need to be removed and replaced with an entirely new IGU. This will ensure that the gas used to insulate stays in place and prevents warm air from exiting your home in the summer and cold air from entering in the winter.

double glazing windows repair Links to an external site. 's also worth noting that even if you need to replace your double glazing it's less expensive than getting a whole new window. It is possible to locate a local business that can install IGUs into your existing frame, saving you the expense of purchasing and fitting a new window.

Frames damaged

Double glazing windows are renowned for their energy efficiency, however they can lose integrity with time due to age and other causes. The frames will begin to weaken and can cause issues such as condensation or draughts. If the frames do not stand up to the test, it is usually a sign that you need to replace them.

UPVC frames are durable however, they may fade with time. This is mostly due to dirt and grime which has built up over time. Make use of a specific cleaning product for UPVC to eliminate any buildup and prevent it from returning. If you notice that your UPVC frames have become discolored and aren't able to be cleaned, it could be a sign that the seals breaking.

Moisture build-up can also be a common problem and occurs when the seal binding the glass panes together breaks down. This can cause an un-dry patch appearing on your wall or ceiling and can even cause damage to your fabrics and furniture in your home. Some homeowners attempt to solve this problem themselves by drilling holes in the window to let air in but this is only a temporary solution that doesn't address the problem with the seal in the first place and could make the issue worse.

It's also important to know that dripping water through the frame indicates that the wood within the frame is beginning to begin to rot. This can be a serious health risk since it could allow insects to enter your home and damage furniture and walls. It is imperative to contact a double glazing repair expert as soon as you notice this issue as it is likely that your windows will require replacing in the near future.

Broken handles and hinges, and the absence of locks are also indicators that your double-glazed windows no longer function properly. These are all problems which can be resolved quickly by a double glazing repair specialist. Ineffective windows that are easy to break into is not just a hassle but will result in higher insurance costs.

Draughts

Double-glazed windows are made to provide your home with an effective thermal barrier, reducing the amount of cold air let in. However, as with most things, they do not last forever and if your double glazing starts to fail, it is crucial to get any issues fixed as soon as you can. You may end up with an expensive and less warm home.

Many double-glazed homeowners have issues with drafts. This can be due to a variety of reasons, such as a problem with the window seal, locks, hinges or a dropped sash. Whatever the reason, if there is an unnatural draught inside your home it is crucial to make the necessary changes as it will not only be uncomfortable, but it could be harmful to your health.

Draughts are usually caused by the gaps in your double glazed window which allow cold air be able to enter your home. You can find a range of solutions for this problem such as closing the gaps using putty or window insulation films that will help to keep your home warmer and quieter for a longer period of time.

If you are experiencing issues with draughts, it is important to replace your gasket seals. This will not only enhance the efficiency of your double-glazing, but will save you money on your energy bills too. Gaskets are usually secured by plastic, metal or wooden carriers which aid in maintaining their memory and give the seals the flexibility they require to perform effectively.

If you aren't sure how to handle your draughts, it might be worthwhile contacting an experienced double glazing repair business who can provide advice and assistance. They can also carry out an inspection of your double glazing to determine the cause of the draught and recommend the best solution.

Verify if your double-glazed unit is covered by warranty and what it will cover. Many companies provide a warranty that runs for 10 or 20 years or sometimes, a lifetime guarantee which is worth checking prior to you make any repairs on your double-glazed windows.