Peugeot 308 Key Fob Problems and How to Fix Them

If your Peugeot key fob suddenly stopped working, it could be due to an inoperative battery for the coin-cell, water damage, receiver modules issues, or even a defective chip. These are all easy solutions and you'll be able to restore your car to speed in no time!

Car keys can also fail because the blade of the key gets worn. This is an easy fix to fix the problem if you go to your local Car Key Man Auto Locksmith and let them put in the new blade for you.

Battery

The key fob in your Peugeot 308 may die or become weak enough to not send a powerful signal. The key fob might be inoperable and prevent you from locking or unlocking your doors or even starting your engine. You'll require a new battery for your key fob to repair this.

peugeot key G28 Car Keys 'll need to buy the replacement battery from an auto parts shop or your local hardware store. Make sure the battery is brand new and has not on the shelf for too long. A fresh new battery will have more capacity and will also be able to send a more powerful signal to the car.

After replacing the battery, try unlocking the doors and locking them using the key fob. If the doors aren't unlocking, it's likely that the receiver module inside the car is the cause. Your local Peugeot dealer can reprogram the receiver module.

The internal chip of the key fob could also be damaged. It is possible to harm your key fob if you drop it on the ground or expose it to moisture. The rubber seals that shield the chip from moisture might wear down over time, especially if your key ring is exposed to water for lengthy periods of time like submerging it in the ocean at the beach. To avoid this from happening, it's essential to keep your key fob safe from moisture and to never let it come in contact with water.

Water Damage

If your key fob gets soaked and soaked, whether you tossed it into the pool or threw it into a puddle, don't assume it's a lost cause. Although the key fob is equipped with rubber seals that should protect it from water, long-term exposure to water may cause damage to its electronic chip. Water is a great conductor and any water that is absorbed into the key fob could cause a series short circuits that eventually destroy the electronic chip. After removing the battery, clean the contacts with isopropyl alcohol and dry it completely before putting it back in.

A dead battery could be the reason your Peugeot 308 won't start. Jumper cables are a fantastic option to restart the engine when you have an additional car. If the battery is faulty, it must be replaced.

Another possibility is a defective receiver inside the vehicle, which could stop it from receiving a signal from the key fob. The key fob might be damaged or there may be an issue with the antenna, wiring, or the key fob itself. It is possible to program a new keyfob to your vehicle if you are using one. If you are unable fix the issue on your own call a professional technician. A trained technician will be able determine the issue quickly and fix it promptly.


Radio Interference

For example, a key fob not being recognized or having a limited range often mean that there is a problem with the system. The interference could be transmitted or radiated the latter resulting from power cables and speaker cables being too close to electrical components. Generally, rerouting the cables or moving them further away from these components could solve the issue.

It's unlikely that someone is listening in on the signals from your key fob to take your car away, but it is possible that the signal has been masked by radio frequency interference. Fortunately, this is not a problem to repair.

If your key fob is not being recognized by the system, you can try a new battery. Make sure the battery is of the correct size and type. Batteries that aren't the correct size can damage your fob.

These devices may interfere with the key signal if they use the same radio frequency. Do not connect these devices to your key fob.

Pairing Issues

The remote keyless entry system that is used in a car has an antenna that receives radio signals from the key fob. If the receiver has developed a problem, you won't be able to start your car regardless of whether the key fob is functional and is reset. This issue can be caused in a number of ways, including by an inoperative battery on the coin-cell or water damage. The receiver may also be malfunctioning as a result of an internal or software issue or damage to the key itself.

The battery that powers your Peugeot 308 keyfob has probably died. You can replace it by a new battery however, it is essential to choose the right battery for your key fob. It is best to use batteries that are the same size, voltage, and specification as the original.

Your Peugeot 308 keyfob may not function if it was paired with another vehicle. It is possible that you have accidentally given your key fob someone else, or the key was used to unlock other vehicles. It is possible to fix this issue by reprogramming the key fob using an OBDII scanner. This tool will request information about your car, for example, its VIN or engine type. It is vital to enter the correct details.