Mitsubishi Key Fob Battery Replacement

The Mitsubishi key fob is a handy piece of technology that lets you unlock and start your car with pressing a button. However, as with any other battery, it eventually needs to be replaced.

Fortunately, replacing the battery in your key fob is a simple job you can do yourself. This article will explain the tools and supplies you'll need, as well as the steps involved in the process.

The Process

Mitsubishi cars are equipped with a variety of convenient features that make driving enjoyable. Key fobs are one of the most convenient features, allowing you to lock and unlock the car from a distance. If, however, you notice your key fob appears to be failing or not working at all, the problem may be a dead battery. It's a quick and easy fix.

Gather your materials. Included in this is a brand new battery, as well as a small screwdriver. Using the screwdriver, carefully open the door of your Mitsubishi key fob. Two tiny seams should be visible at the bottom of your fob. Use a screwdriver to remove the door from the battery.

After you have opened the fob, remove the battery you have used and replace it with a brand new one. Make sure you dispose of the old battery properly. After you've replaced the battery, close the door and reconnect the key-chain to your vehicle. You can test your Mitsubishi key fob to make sure it's functioning properly.

Key Fob Battery Replacement

If you own a new or used Mitsubishi SUV, you will have the key fob which allows you to control the car's features with the push of a single button. If your key fob has issues connecting to your Mitsubishi vehicle it could be because your battery is dying. If you are experiencing issues with a dead or malfunctioning key fob replacing the battery is an easy and quick fix that will get you back on the road in a short time.

The first step in replacing your Mitsubishi key fob battery is to locate the battery. The key fob contains a small battery that is held in place by two tabs of plastic. By inserting a screwdriver between the tabs (shown in the image by the yellow arrows) will allow you to easily remove the battery. To avoid losing the buttons to avoid losing them, place the key fob on a flat surface while you're using a screwdriver to open it. This will prevent you from losing the buttons by accident and tearing up the circuit board.

The Tools

Modern Mitsubishi automobiles are equipped with a range of technological features that make driving more comfortable. Key fobs are one of the most useful features. It lets drivers lock their vehicle, unlock it, and even start the motor remotely. If your key fob begins to act up or isn't connecting to your vehicle The team at Fort Myers Mitsubishi can help.

A dead battery is the primary reason for a keyfob that is disconnected. You can fix this by replacing the battery on your Mitsubishi keyfob. All you need is an original CR2032 battery and a few basic tools to complete the job.

To begin, remove the Mitsubishi keyfob from your keychain. Look for a small indentation on the top of the device. Use a flat screwdriver to enter this indentation and unlock the key fob. Replace the old battery with a new one, making sure that it is on the positive (+) or upward-facing side of the new battery is facing upwards. Once you have the new battery in place Reassemble the key fob.

Once the key fob is put back together, reattach it to your keychain and try out the functions. You can now drive with confidence in your Mitsubishi if everything works correctly. You can also test out the key fob's remote start and power liftgate open and close functions to check if they're working properly.

If you're interested to learn more about your Mitsubishi key fob and the other convenience features that it offers we invite you to contact us at Fort Myers Mitsubishi. We're here to help you get the most out of your vehicle and are looking to answer any questions you might have.

The Materials

If your Mitsubishi key fob isn't responding, it may be due to a programming issue or an inoperative battery. If the former is the case, you may be able to resolve the issue by replacing the battery yourself. It's a simple procedure that takes only a few moments. You'll need a few CR2032 batteries as well as a small flathead screwdriver to remove the key fob and replace the battery.

Start by removing your metal key from the fob. Find the indentation at the top and twist it using the flat end of the screwdriver. The old battery will be visible inside. Simply remove it and replace it with a brand new one. When you take out the old batteries, make sure not to damage the circuit board or buttons. It's easy to remove the circuit board or move the buttons while trying to pry the battery out.

Make sure to use a screwdriver with an extremely thin tip, not a big head. This can damage your fob. It's also a good idea, prior to starting taking a photo of the interior of the fob so that you have a reference point before you insert the battery back in. This will prevent confusion when reassembling your key fob.

mitsubishi keyless entry remote enables you to control a number of your vehicle's features including remote start, power liftgates that open and close. If your key fob isn't functioning or has trouble connecting to your vehicle, you may have to reset it. This can be done easily and quickly at the dealership or specific Interstate All Battery Centers. Follow these steps to get your Mitsubishi remote working in no time. You'll be able to utilize the features that make your car more convenient again. For more information, visit Fort Myers Mitsubishi.

The Time

The fob for the key plays a crucial part in the Mitsubishi vehicle's experience. From locking and unlocking the car, to using it to start the engine, or open the trunk and liftgate The fob offers numerous convenience features that make driving your Mitsubishi more enjoyable and comfortable than ever before. Like all electronic devices the fob could stop working due to a dead batteries.

In the event that this happens, it's important to know how to replace the battery in order to get your key fob back functioning. If you follow the steps in this guide from Fort Myers Mitsubishi, you can replace the battery in your key fob and ensure that it continues to function as it was intended to.


In the beginning, you'll need to obtain a few essential items. Included in this are a flathead driver as well as a brand new battery. Some cases for key fobs have a cutout that makes it easier to pull them apart however, it is recommended that you don't apply too much pressure. If you do, the fob may pop open and scatter parts all over your living space. It is best to cautiously wedge the screwdriver along the edges of case.

After you have opened the case, remove the old battery and replace it with a new one. The new battery is a calculator CR2032 battery, similar to the ones manufactured by Maxell or Panasonic. Once you have put in the new battery, press the components back together, then close the case, then test it to ensure it is working properly.

If not then you will need to reprogramme the remote. This will likely require you to take your vehicle to a dealer, but it is possible that you will be able to accomplish this at home using the right tools and a little amount of knowledge. This guide is meant to be helpful and we hope it will help you solve your Mitsubishi keyfob working once more. Please reach out to our service center at Sunset Mitsubishi of Auburn if you have any questions or need additional assistance.