Car Keys Repair - Common Problems With Car Keys

It can be a challenge to keep the track of keys to your car. They could be damaged, bent or even stolen.

Look through your bag and pockets for them. If you are unable to locate them Try jiggling the key. This may help to remove any minor damage to the lock wafers within the cylinder.

1. The key is bent

The most frequent issue with keys for cars is that they can be bent. This is a possibility when you use your key to open your trunk or load groceries into it.

A locksmith is the best choice for this problem, as they have the tools and know-how to remove the bent keys without causing damage to the lock ignition. They can also create a new car key on the spot. This is especially helpful in the event that the key you are using has a chip embedded in it.

Chip-embedded keys have a special electronic transponder integrated into them that transmits a unique signal to the system of your vehicle that then informs it whether the key is legal. A locksmith can make this type of key or you can buy one from your dealer. It is usually simpler to replace a key that is older at an establishment like a locksmith or hardware store in the event that you already have one.

Regardless of what kind of key you have it's an excellent idea to write down your vehicle identification number (VIN), so you can provide it to the person who makes or repairs your key. The VIN is typically located on the dashboard of your vehicle or in its owner's manual. If you do decide to buy an alternative key, it's a good idea to have the dealer program it to your car. It could take several days and can cost you upwards of $200.

2. The key is stuck


The car's key can get stuck for a variety of reasons. Some of these issues might be specific to a certain automobile type or manufacturer, however the majority are universal. Here are a few of the most commonly used ways your car key can get stuck in the ignition:

One of the most frequent reasons for a car key becoming stuck in the ignition is dirt and build-up. The more grit works its way into the ignition, the more friction there will be between the key's surfaces and the slots. This can make it difficult to turn the key or take it off.

Another possibility is that your key is damaged. With time, the frequent use of your key could cause it to wear out. You might even accidentally drop it on a hard surface and break or bend it in some way. Damaged keys may also get stuck in the ignition if they don't fit correctly.

Contacting a locksmith, or an auto service center is the best option when your key is damaged. They can either replace the key for you or help you find the most durable, newer key that is compatible with the lock cylinder in your vehicle. It is important to remember that it's very dangerous and risky to try to replace the broken or damaged key by yourself, particularly in the event that you've never dealt dealing with this kind of issue before.

4. The key is stuck on the gear selector.

A lot of modern cars come with features that lock the steering wheel whenever you attempt to move it after turning off the car. This feature is designed to prevent theft, but it can also prevent you removing the keys. To solve this issue, make sure that your vehicle is in Park and try shaking the gear selector. This will usually unlock your steering lock, which will allow you to remove the key.

It is important to be aware that using brute force could damage the ignition switch or the key. It's better to call an expert locksmith instead. They will have the tools and expertise necessary to solve the problem without causing further damage.

In addition to shaking the gear selector, you may also try using a spare key or tap the end of the key using a mallet. This can help to dislodge any obstructions that are preventing the key from being removed. If all of these methods are unsuccessful, you should contact a car locksmith serving Montgomery for assistance. They'll have the tools and expertise required to solve the issue quickly and safely. They'll also be able to suggest any other solutions that could aid in resolving the issue. Don't be worried if your ignition key becomes stuck! Just follow these simple steps to fix the issue.

5. remote car key repair is stuck in the battery

Sometimes keys get stuck in the car battery, and won't be released no matter how many times you try to jiggle it. If this is the case you should consult an expert who has dealt dealing with such issues. They'll have the proper tools to safely remove your key without causing additional damage.

The wear and tear on the ignition cylinder could cause your key to get stuck. The tiny tumbler pins inside the cylinder that match up with your car key can be bent or collapsed which makes it difficult to move the key and cause it to become stuck in its place. Spraying WD-40 or another type of light lubricant, on the key may help loosen the pins over a period of time.

If you can't remove the car key that is stuck in the ignition, do not use excessive force. remote car key repair could cause damage to the key as well as the ignition cylinder. If you are unable to get your car key out of the ignition, use a tack-hammer or attempt shifting the gears. If you're still not able to get your key out, contact a mobile mechanic or locksmith for help. They'll have the equipment and knowledge to solve the issue swiftly. They'll also be able diagnose any other underlying problems with your ignition.

6. The key is encased in the cylinder.

The key to your car is subject to a lot of abuse during driving. Locking it in a door, putting it in your pocket with loose change, or throwing it onto a hard surface all distort the key slightly each time. This wear makes it more difficult to insert or remove the key. This can also make it easier for the internal tumbler pins to stick against the key's surface and cause it to move around or become stuck.

If this is the issue then use a flashlight to look inside the cylinder and find any metal debris that could hinder it from turning smoothly. A quick clean with degreaser will make this go much faster. Then spray the lock the cylinder with a dry graphite lubricant like WD-40. This will help the pins and springs move freely so that the key can slide in and out easily.

If none of these things work try jiggling your steering wheel while turning the key a few times. If the issue continues, call a mechanic near you to get advice or take a closer look at the ignition cylinder. If this is the situation it could be the time to replace the ignition cylinder. It is always better to do this earlier rather than later, or else you might find yourself stranded without an option to start the vehicle.