How to Replace a Mazda Key

Mazda is a brand known for its innovative and intuitive technology. Certain systems boost safety or performance while others make driving around East Stroudsburg Easton and Brodheadsville easier.

The key fob is a great example of this. This device allows you to lock or unlock your Mazda by pressing a button. Its battery should be replaced on a regular basis.


Lost Keys

Keys that are lost or stolen can cause a lot of trouble. It is relatively easy to replace keys for a Mazda Key for older models with regular keys made of metal. However, newer cars require special computer chips that can be programmed that can only be made by a locksmith or dealer.

To start, you will need the VIN for your car. This information can be found on the dashboard of your car, on the insurance card, or in the documents for your vehicle. Be sure to record the information you need to give it to the locksmith or dealership.

You will require an extra key that works. Put the key in the slot and turn the ignition to ON. After five seconds, remove the key and turn the ignition off. Repeat the process with the second working key. Once both keys are inserted and the computer chip of your car is linked to the new key.

If you have lost your car keys and do not have spare keys, you'll need to take the vehicle to the dealer. Then, you'll have to prove ownership and pay for an exchange key. You may need to wait several days while the dealer is able to order and pair keys to your car. If you can, have an locksmith create a replacement key instead of the dealer for a lower cost and less hassle.

Repairing the ignition cylinder

The ignition cylinder is the part of your Mazda that allows you to start the car using the use of a key. If you are having trouble turning it on or you're unable to insert the key into the switch, the ignition cylinder may need be replaced.

The ignition cylinders fail more frequently than keys, which tend to last longer. There isn't a pre-planned maintenance schedule for them, but you can help them last by keeping your key clean and avoiding excessive shaking or jiggling of the key.

To replace the ignition coil, take off any trim or covers that are blocking the path. Depending on the model, you may need to take off the steering wheel cover. You may also need to remove the wiper and accessory switch. Use an socket wrench or screwdriver to press the release tab on cylinder. This will release the cylinder from its switch and let it slide out.

Install the new cylinder by connecting the wires to it, then tightening the two screws at the top and then replacing the switch. Reconnect the battery, and verify that the new cylinder can move keys in and out. Repeat this process three to five times, and then reconnect the battery and try to start the vehicle to make sure everything is working as it should.

Remote Control Replacement

If your Mazda key remote is not working, you'll have to contact a professional. While this isn't as prevalent as a problem with the cylinder of your ignition, it does happen, and it can leave you in some instances. A locksmith will be in a position to repair the car key remote and will also handle all the necessary programming that goes along with it.

The only thing you'll need from a locksmith in order for them to do this is the type and year of your Mazda vehicle. This will allow them to collect the right materials and also know if they need to do any additional programming of keys for your particular model of Mazda.

It could be that the battery of your key fob is low. In this case the best thing to try is to reset your receiver. This can often bring back the functionality. If that doesn't work you'll need to replace the battery. To do this you will need to remove the key and then use a flathead screwdriver wrapped in tape to pull the case open on one side. Once you've done that, you can insert an external battery into the keyfob. Close the case, and check it's compatible. The RF unit in your Mazda must be programmed to recognize the new key.

Transponder Chip Replacement

You might have an Mazda smart key or key fob. If that's the case you're driving a car, it's likely to have a transponder. This tiny piece of technology, which is basically an micro-motherboard, transmits an immobilizer signal in your car when it is placed in the ignition.

These kinds of keys are incredibly helpful for security reasons, because they stop other people from starting your car, by ensuring that the sole person who can actually start your car is you. This is why you need to be vigilant to make sure that your key does not become lost or stolen.

Luckily, transponder chips can be replaced by an experienced locksmith. To do this, you'll have to remove the cover from the key fob - usually it's a thin bit of plastic which can be removed using an pliers or screwdriver. The next step is to take out the chip, which will appear like a small black square or a tube that is transparent. Once replacement mazda 2 key 've completed this, simply put the chip on a piece of tape and then attach it to the ignition lock.

A reputable locksmith should be able to do this in no time at all and will be able to help you get your vehicle back in motion as fast as possible. If you're experiencing issues with your Mazda key, contact a reputable mobile locksmith right now.