Sliding Patio Doors Repair

It is possible for sliding patio doors to become difficult to open and close. This could be due to a range of issues, such as dirty tracks or improperly aligned rollers.


Start by cleaning patio door repairs and Lubricating the rollers. You can also use the adjustment holes on the bottom of the movable panel to re-align your rollers.

Dirty or Damaged Track

A sliding door that doesn't slide properly can result from a dirty or damaged track. Over time, dirt, grit and even corrosion can form and stop the track from moving smoothly. The solution is to clean the track thoroughly using a brush and mild detergent. It is recommended to complete this task regularly to ensure the smooth operation of your door and prevent the need for costly repairs down the road.

A leaking door can also be a common problem. It needs immediate attention to avoid water damage, structural deterioration and mold growth. The problem is usually caused by worn weather strips and a misaligned door. This can be fixed by replacing the old weather stripping and aligning the doors.

Rollers that bounce off the track are a problem that is often repaired with a simple DIY work. Recruit a friend to help you with this task, as the door can be heavy. Sit inside the house and then lean a panel towards you to shift the rollers. To stop the panel from falling, set it on sawhorses after it has been lifted off the bottom track. Then, loosen the roller's screws and remove them using the help of a screwdriver. You can now clean any dirt that is caught between the wheels and the tracks. Clean each wheel by rubbing denatured alcohol on a rag. patio door repairs to their tracks and then attach them again.

It's possible to straighten a bent section of track with a mallet made of rubber and a piece of wood. If the bent section is near hinges or has the potential to cause more damage, it's best to call in an expert.

Misaligned Rollers

If your sliding door is experiencing difficulty sliding, it's most likely that the rollers have been misaligned. The wheels may be dirty or rusted and their bearings wear down. This friction causes the door to become snagged and grind when it is opened or closed. This can also result in squeaking sounds.

Fortunately it's an easy fix. You don't need to remove the door to access the wheels, since they are mounted on a bracket which is adjustable. Find the holes for adjustment (usually on either side of the frame) and utilize a screwdriver for turning the screws that control the wheels. A clockwise rotation of the screw raises the wheel, while a counterclockwise rotation lowers it. Continue to adjust until the door moves effortlessly and quietly when it is opened or closed.

It is essential to adjust the wheel prior making adjustments to your latch. The latch hooks must line up with the strike plate (the opening through which the latch locks) in order for the lock to function properly. If you don't take this step the latch could open or close by accident even when you're not in the room.

The sliding patio doors are an investment. Making sure they are in good condition will ensure your family's safety. By fixing common issues such as damaged tracks, rollers or handles, you can avoid expensive repairs in the future. Contact us for more information on patio doors. We can help you maintain your sliding patio doors in top condition by evaluating the repair requirements. Our experts can also help with any replacement parts that you may need.

The door frame is damaged or damaged

Sliding patio doors are a wonderful addition to any home and provide a stylish and practical alternative to swing-open or hinged patio door options. Like other hardware items, sliding patio doors can become problematic with time. Fortunately, many of these issues are easy to fix with a bit of DIY expertise.

A common issue with sliding patio doors is gaps in the frame. This could be due to a number of reasons, including a misaligned track or rollers or a damaged track door, or a bent door frame. In most cases the root of the issue is easily remedied by removal of the door and reconnecting the track or rolling elements. It is essential to be very careful not to harm the frame or track.

In certain instances, it may be necessary to replace the entire track, which can be done easily with a universal replacement kit that is readily available at major hardware stores. These kits are simple to install and will get your door working properly in no time at all.

It is essential to inspect the frame of your sliding door and hardware for signs of wear and tear, such as loose screws or bolts. This is an easy and efficient DIY patio maintenance task that can be accomplished with a screwdriver. In addition, it is essential to oil your tracks and rollers to ensure smooth operation and avoid premature wear.

For many homeowners the patio doors are their primary entry point to their backyard as well as outdoor living space. Therefore, they have to be able to function properly in order to maintain the comfort of their home and provide security. If you follow these easy DIY maintenance tips, homeowners can extend the life of their sliding patio door and reduce costly repairs or replacements.

A faulty handle

The sliding patio doors are an excellent way to get into your home and gain access to your backyard, however they can become difficult to operate when they are not aligned properly. A damaged handle could cause the door to become stuck or difficult to open and close. Repairing a damaged handle can be accomplished at home.

In most cases the reason for a loose grip is the result of screws that have fallen out of the backplate. To fix this issue you can simply tighten the two screws that are on the inside of the handle using a screwdriver. If the handle remains loose, it could indicate that the threads have worn out and require replacement.

A damaged latch could be the cause. This is more likely to happen if the latch is made of plastic, not metal. You can try lubricating the latch if it is not engaging or turning. If this doesn't work, you may need to replace the lock.

In the end, the handle could become difficult to use in the event that it is broken or damaged. If this happens, you'll need to replace the handle with one that is in line with the style and design of your patio doors.

If your patio doors are old and dated or new, Feldco can help you get them back on track. We offer high-quality doors in various sizes and styles that can be installed to fit your home perfectly. Contact us today to find out more about our doors! We provide services to Southern California homeowners, including Ventura County and Orange County.

Poor weatherstripping

It's time to replace your weather stripping if you notice light coming from doors and windows or notice a draft pushing at the window or door. The strips form a tight seal that keeps unwanted air, pests, or water from getting into your home. This helps to keep your heated and conditioned air inside, saving money on energy bills.

Depending on the condition of your weather stripping it could have deflated and lost its buoyant, positive seal. This is easy to diagnose by taking a dollar note and running it under the seal on top of the door frame and below the jamb of the door where they overlap. If the dollar bill slides effortlessly between the seal and the door, it's time to replace the weather stripping.

If you replace only the worn-out part of the weather stripping, this may result in future issues with the seal. It's far more effective to replace the entire stripping so that you are able to rest knowing your door is properly sealed again.

Follow our DIY guide for weather stripping to install the right material on your sliding patio door, and frame to ensure a strong, lasting seal. It's a great option to fix your door and save on your energy bills Don't delay until it's too late. Your wallet as well as your home will thank you.