Double Glazing Window Locks Repairs

Double glazing window locks repairs are crucial to ensure your home is secure. Insecure hinges and handles could allow draughts into your home, leaving your windows vulnerable to burglars.

It is possible to repair the stiffness of uPVC handles or locks without replacing the door or window. Simply cooling or oiling mechanisms can often help solve any problems.

Broken Glass

Window locks made of double glazing can wear out over time. The handles may become difficult to open, or even lock shut. This can result in issues with ventilation in the home and can also be an security risk. It's important that you get the window repaired as soon as possible.

Double-glazed windows comprise two or more glass panes with gas in between to provide insulation. A seal also holds the panes together. If you notice condensation between the glass panes, it is likely that one of these seals must be replaced. It is usually only replacing one pane of glass which is much less costly than replacing the entire glass window.

Cloudiness and condensation are typically caused by a blowing seal on windows with double glazing. It can be caused by various reasons, including air leaks or an excess amount of humidity in the home. It's important to contact a double glazing specialist to replace the gas and seal your double-glazed window when you spot this problem.

It is possible to replace just one pan of double-glazed glass, but this is not recommended without the assistance of a professional. It is essential to have the proper tools and know-how to do the job safely. If you attempt to do it yourself, it could cause damage to the window's frame, or even to your health.

If a double-glazed window gets stuck, a lot of people use a crowbar in an attempt to open it. However, this typically causes the frame to be damaged and scratched. A specialist in window repair will be able to remove the handle and open your window without causing damage. They can also change old window mechanisms into modern ones.

Window hinges are prone to becoming stiff and difficult to open with time particularly if they're located in an area that is noisy. To stop this from happening it's recommended to keep the hinges lubricated on a regular basis with silicone spray. It's also important to avoid closing the window heavy or closing it using the handles, as this can cause damage to the hinges and lock mechanism.

Broken Sash

This is a frequent issue with older double-glazed windows. If the upper sash has been ripped out of its pocket, it could be difficult to secure it and open the window. This usually happens because the pins have disengaged, or a balance shoe has been disconnected. It is important to know the way your sash has been set up before attempting to repair it.

This can be resolved by removing the sash, and cleaning it thoroughly. This will let you know if it's still a good fit. If not, double glazing near me can add stoppers for sash to keep it in place. These can be purchased on the internet or at many hardware stores. After you've cleaned your sash you can put in the beads that are parting and grease the pulley axles using a Teflon or silicone spray. Label the weights prior to removing them to ensure that you are able to reinstall them correctly.

Another common issue is a damaged handle. It's difficult to tell if your window handle is broken however there are a few indicators. If the handle is stiff or clunky to operate or doesn't feel as if it's securely attached to the wall, then it's broken.


This could be due to an unintentional lack of use, but it's also possible that the handle has cracked or even become detached. In some cases the handle could be damaged internally and cannot be replaced. However, it is still worthwhile to attempt to fix the problem as soon as is possible.

To remove the window sash you might need to remove hinges that secure it to the frame. It's a challenging task, so you'll require someone to assist you in holding the sash in place. After removing the hinges it is important to wash the area around them. You should also try to attach the hinges again and check the handle to make sure it's functioning properly. If it's not, you may want to consider replacing it. This will make your window as secure as is possible.

Broken Handle

It's not unusual for window handles to break or deteriorate over time. Therefore, it's crucial that broken handles are repaired as fast as possible to avoid lack of functionality and security issues.

Fortunately window handles are relatively easy to replace. In contrast to a sash, which requires a number of bolts to secure, a window handle is secured using one or two screws making it a simple DIY job for anyone with a little of know-how. It's important to test the handle once it is installed to ensure that it works correctly. This includes locking the handle and looking for holes which could allow drafts enter your home or allow burglars to gain access.

The most frequent cause of the broken handle on a window is wear and tear resulting from repeated use. However, excessive stress or force can result in a broken handle. If you force a window to open, it could cause additional stress on the handle. This increases the risk of injury.

Other causes of a damaged hand could be due to poor maintenance, aging or design issues. The handle may break prematurely due to the absence of regular cleaning and oiling. This is usually caused by dirt or debris that have accumulated over time. Additionally the handle may be weakened by incorrect installation or alignment issues.

If the previously mentioned fixes aren't successful then the Tasker may need to gain access to and take out the lock mechanism itself. This may involve taking the frame off or 'breaking out' the existing window frame and the plastic bead (to give more wriggle room). A replacement lock may be installed that matches the shape of the existing uPVC handle. After that the new handle will be re-affixed and the process is completed. If this is the situation the Tasker will offer a quote for the repair costs.

Lock is faulty Lock

When window locks become damaged, it's crucial to repair the issue as soon as possible. A damaged window can lead to the door to open, causing draughts and make your home more vulnerable to burglary. Window lock repairs are usually minor, but it is better to call a professional before the problem gets worse and cost you more money.

UPVC window handles are available in two styles: cockspur handles and espagnolette handles. The first uses a central rod to operate mushroom-like locking cams, which are locked into window frame keeps. The lock's mushroom cams are activated by a handle connected to spindles. The latch of the lock is then clipped into the mortise of a window frame's catches.

Both kinds of UPVC window locks are susceptible to damage, particularly in older homes. This can happen when the sash is bent or misaligned, and it might even fall off. In these cases, the lock must be replaced to stop draughts and loss of energy efficiency. A Tasker will replace the faulty locks for you and provide you with peace of mind knowing your windows are safe from burglars.

The first thing a Tasker can do to fix your double glazing window lock is to look it over and identify the problem. Once they have the necessary details, they'll set up their tools before arriving at your home. They'll typically bring a Phillips-head screwdriver, needle-nose pliers, wood putty and fine-grit paper.

Tasker must loosen screws that hold both parts of the lock on the window frame if the sash isn't aligned properly. The Tasker will then take off the latch and then fill the mounting holes (if applicable) with wood putty, before sanding the area to ensure that it is identical to the rest of the frame.

If the lock is rusted, they'll clean it using a wire brush or oil and then lubricate it with grease to keep it functioning smoothly. They'll also inspect the condition of the latch before reinstalling it.