Why You Should Trust Your Double Glazing Repairs to Local Experts

It's impossible to replace double glazing on your own, but an expert glass installer will make the task easy and secure. It's also worth checking with the company you purchased it from to determine if it's still under warranty.

Drilling holes in misted windows will release the condensation but it's only a temporary solution. Double glazing that has blown must be replaced in order to restore the thermal efficiency.

Broken window panes

If a window pane is broken it leaves a noticeable gap in the double-glazing, which could result in draughts or moisture. They're not just annoying, but can also damage your home and your health. The damp conditions can lead to damaged frames, structural issues and other expensive repairs.

But, a damaged pane is often an easy fix when you know how to do it properly. First, take the appropriate precautions to prevent injury, such as wearing eye protection and gloves. Then, remove the glass shards that were left. After you have removed the shards employ a utility knife to cut through any glazing putty and metal glazing points. Once the glass is clear to be removed, gently remove it from the frame.

After you've cleaned and sanded the surface to remove any gunk or paint It's time to prepare the space to be ready for the glass. Make sure you take measurements of the opening from side to side and from top to bottom and subtract 1/8 inch from both measurements to allow for any expansion or contraction of the frame over the years. This will ensure the new glass is installed correctly.

Then, apply a string of glaziers compound to the outside edge of your glass-frame joint. Smooth it out with a putty blade, ensuring it matches the colour of the frame. After the compound has dried and dried, you can paint the new pane with the same color as the rest of your window.


To stop the crack from spreading, create a small arc using your utility knife, just beyond the area that's cracked. This will reduce the crack and stop it from spreading, which will save your window pane without the need to replace it.

It can be difficult to do your own repairs without the right tools. It's much safer and easier to contact a company that specializes in repairs to local double glazing. This will save you time and money, and make sure that your double-glazing is repaired to the highest standard.

Broken seals

A broken seal can cause windows to lose their insulating properties, leading to drafts and higher energy bills. This lets humidity and moisture to enter the window panes causing fogging and condensation. Foggy windows can be a hassle to live with and the issue will only worsen over time If it isn't addressed.

There are several ways to avoid window seal breakages by having your windows professionally installed and not power-washing your windows. Even if your windows look great, you should get the seals fixed as soon as you can should you spot any indications that the seal is broken for example, condensation on the glass or an increase in your energy bills.

The window seals are constructed of flexible materials that can be damaged as time passes. Older windows are more susceptible to this issue, as well as windows that have been exposed to excessive sunlight. Window seals can also fail if there's issues with the installation job, such as gaps or frames that are uneven.

While it is possible to fix a broken window seal at home, the process is complex and could damage other parts of the windows, such as the argon gas inside the windows. It is best to call an expert to examine your windows and fix any worn or damaged seals.

Once the window seal is replaced, your double-glazed will function just as it should, securing your home from heat loss and cold air infiltration. This will save you money on cooling and heating while ensuring your home is comfortable.

In most cases, to repair a broken seal on a window it is necessary to remove the window from the sash. The old sealant must be removed. Once the window has been cleaned and is now ready to be reinstalled it will be filled with argon before being sealed again. While it is possible to do this on your own, it is recommended to call an expert glazier to make sure the work is done correctly and safely.

Broken door handles

The handle on the front door of your house is an important part of your security. It allows you to open the door, and also attaches to a latch placed into a slot inside the frame of the door to keep your door shut. If the handle isn't secure, this can cause you to have trouble opening the door. It may be an indication that your locking mechanism isn't working properly.

The good news is that fixing a loose door handle is relatively easy. In most cases, you'll need to tighten the screw that holds it in place. If the issue is more extensive than that, you may need to install an entirely new handle.

First, you'll need to wedge the door open with a stop or wedge to ensure that it doesn't close when you are working on the knob or handle. This will prevent the paint from being damaged and will allow you to get access to all parts of the doorknob or handle without worrying about the latch.

The next step is to take off the coverplate that sits over the door handle. It could appear to be a round or rectangular piece of plastic designed to conceal the screws for a cleaner appearance. Some might have a small slot or detent that you could use a flathead screwdriver press down to open it. Then, you'll have to remove the handle's base off and expose the screws that secure it.

The cover plate conceals most of the screws that hold your door handle or knob in place. Once you've removed it, you can see each one and tighten them if needed. Don't over-tighten the screws, since it could cause damage to the knob or handle. Once all of the screws are tight, you can put the base back on and place the handle or knob on top, aligning it with either the screw holes (if there are visible ones) or the detent hole. Test the handle once you're done to make sure it functions properly.

double glazing repairs and Chips

Even the most well-maintained double glazing can be damaged. It's only just a few smacks from scattered footballs or a sudden blast of wind to cause chips, cracks and scratches. These damages can have a negative effect on the performance of your windows and doors and require replacement. It is important to spot the signs of damage and then contact your installer as quickly as you can. You can assist by providing details about the issue and pictures, if applicable.

It is possible to fix chips or scratches without much difficulty, depending on their severity. If the scratch is deep enough that you can feel it with your fingernail, it is recommended to call a glazier to take it off. They will be able make use of glass polish to remove it. They'll also be able to offer some tips for maintaining your windows and doors, to keep them in good condition.

Be on the lookout for signs of a gas leak in the space between your window panes. If you notice that condensation is forming between the panes, it could indicate that the gas inert has evaporated and warm air is making its way into your home. If you notice this problem it is crucial to communicate with your installer straight away because this could be covered under your guarantee.

If your double-glazed windows are under warranty and you are eligible to claim back any repair expenses. If not, you might want to consider switching to a different installer that can be relied on to provide superior windows and top customer service. Look up online reviews, verify the BBB or ask for references from past customers to make sure you choose a professional and quality company. You should also ask about the certifications of major manufacturers and the Fenestration and Glazing Industry Alliance. This will help you stay clear of companies that are not authorized to install your double glazing.