Start with the feet of the tub. Each foot is designed to fit in only one spot on the tub, so make sure you put them in their correct places. You may want to get a friend to help you with this. Install both feet on the plumbing end of the tub first, and then the feet on the opposite end.



bath tub restoration While waiting for your tub to dry, it's time to prepare the room for spraying. Floors can be adequately protected by drop cloths and tarps. You will need to mask off everything else using masking tape and either newspapers or plastic. Taking these precautions prior to spraying will save you a lot of time and grief in the long run.

Usually, hiring a professional is the last option. It is expensive but they do get the job done. Before you do anything, you have to determine first if you can fix the problem first especially if it is just a clog or a leak.

bathtub refinishing tampa Bathtub Reglazing. This is the mainly the frequent task of modernizing a bathtub. Perhaps it has the major impact compared the rest. It can totally turn an old bathtub into modernize and new again. When bathtub surface repair was made properly, a guarantee can be taken for a long time unlike for bathtub paint. The materials used and the process followed warranty you for a lengthy of time.

You can also use fabrics, in the form window treatments and shower curtains, to add splashes of color to contrast your new paint. If you want to create the illusion of more space, choose soft colors that reflect light, as well as some nice bathroom wall mirrors. To add splashes of color, opt for bath mats and accessories in warm or bold shades.

If your existing bathtub is pink or aqua, I can see your point. In that case, reglazing tub might be an option. This is not inexpensive, but will eliminate the struggle of getting the bathtub out of it's existing space.

5) You should allow the glaze to remain on the bathtub for up to forty eight hours. This allows the glaze time to dry and to soak into the surface of the tub. Many individuals who are engaging in bathroom remodeling projects will ensure that the product remains on the bathtub for long amounts of time because it seems that the longer it is not exposed to moisture, it settles more appropriately.

Next is to restore those tired and dull fiberglass tubs and showers with epoxy paint. This is a simple process and they can fill any chips, dents or cracks. You will have a wide selection of colors to choose from and the cost is very reasonable... around $150.00 per tub or shower. You will want to have a professional do your tub restoration as the product is highly toxic. Just look for tub restoration on-line or in the yellow pages.