Paintball guns come in many varieties. However, the largest differences are not in the guns just as much as they are in the hoppers or loaders. They are the the different parts of the guns, or "markers", which store and load ammo.

Anywhere from 40 to 300 paintballs could be held by different loaders. How big is the hopper will affect the weight of the gun. The speed and reliability of the marker is also greatly affected by the hopper type, particularly when it involves mechanized options.


Even though there are Article source of forms of these loaders available on the market today, they all mostly fall into a few primary categories. These categories are gravity-feed, agitating and force-feed. Stick feeds are another type of loader, though they are not commonly referred to as "hoppers."

Here is a brief summary of these different loader categories:

Stick feeds - Stick feeds 're normally applied to pump-operated guns. They contain simple tubes which are with the capacity of holding about two dozen paintballs. Most stick feeds are parallel to the barrel of the gun. The next paintball is always loaded by rocking the gun slightly forward. Even though some stick feeds are vertical to facilitate gravity feeding, these guns are not always reliable. The horizontal versions certainly are a common requirement of stock paintball play. The concept of stock paintball is to enforce limitations on game play, in order that it resembles the sport since it was originally born. This may be done for added challenge or just to save money.
Gravity feeds - Someone who is looking for a straightforward and an inexpensive hopper with regards to gun will usually choose a gravity feed. These hoppers consist of a large container as well as a feed tube that is placed at the bottom. Although these hoppers are able to feed a lot more than eight balls per second, they are unable to feed a lot more than eight paintballs per second reliably and on a consistent basis. They commonly jam up paintball guns and occasionally force paintballs to accumulate above the tube.
Agitating - Agitating hoppers for guns work with a propeller within the container. These small fan blades prevent the paintballs from jamming up the neck of the gun. This enables the gun to be fired at a far more accelerated pace than that of the gravity loaders.
Force-feed - These hoppers work with a device to fully capture paintballs and then force them into the marker. The device is often spring-loaded or powered by way of a belt system. These types of hoppers are frequently within guns of professional, tournament-playing paintballers because they are on the list of only guns that can match that type of accelerated play. Force-feed hoppers continue to be developed and have advanced in recent years. Many provide a digital readout of just how many paintballs remain within the loader. The most recent types use wireless communication to efficiently continue feeding the paintballs prior to the pneumatic system of the gun has even started the cycle for the next shot. A system like this is desirable as it near completely eliminates misfeeds. Needless to say, it also greatly increases the speed of the loader. Along with all this, it could even extend battery life by minimizing any extra work done by the gun. As companies continue steadily to receive feedback from users of paintball guns, it is likely that you will see continual advancements made on this style of marker in particular. Force-feed hoppers and agitating hoppers are created to fire paintballs more quickly than the other varieties. Still, you will find a chance these can fail at performing their function. The most typical circumstance under which these guns fail is when they touch moisture.

Anne Clarke writes numerous articles for Internet sites on parenting, fashion, and home decor. Her background also includes teaching, gardening, and recreation. For more of her useful articles on paintball equipment, please visit Paintball Gear [http://www.icupaintball.com/], supplier of information regarding paintball guns along with other gear.