Statistically, a surprisingly raised percentage of construction projects go over budget and/or over time upon completion. This is often a consequence to the fact that the drawings produced prior to the start of construction process end up significantly not the same as the As Fitted Drawings especially so far as the 3D M&E (MEP) Coordinated Drawings are concerned. Here is where a BIM approach can help during the construction phase. Some of the key points that stick out as answers to the title questions are:

? BIM is a form of iterative design, where atop the same model you can include more details, more information, phase out the project, produce countless drawings and schedules. When along with the architectural BIM Modeling you insert MEP (M&E) BIM information you've got a much clearer view of the project all together. This translates into a clearer view during the construction phase of the project.


? With BIM, producing 3D M&E (MEP) Coordinated Drawings is straightforward. These drawings permit the coordination of the multiple services involved with any building, HVAC, plumbing, electrical systems along with other public health systems with the structural and architectural (interior finishes, facades, partitions, etc.) elements.

? When working in a genuine 3D environment the engineering specialists can make sure that the proposed solution is viable in the real world and that those drawings will not be amended once they go into construction.

? BIM Modeling enables one to view the model in 3D, like the builders and installation workers. If at any point an inaccuracy is spotted, after the model is adjusted everyone sees the updates. This is even more possible with shared models so for instance when using a cloud based applications, such as for example Autodesk 360, all the documents and models are in one place.

? MEP (M&E) Prefabrication Models and Drawings can be produced much quicker and much more reliably from coordinated 3D models. After the models come in place they could be checked for interferences and spatially coordinated using Autodesk's Navisworks tool before being taken into specialised fabrication software.

? MEP installers know just what services will be accessed by which access hatched as that is all shown in the MEP (M&E) BIM model. Equally MEP installers can easily see what areas they should keep services out of, either to reduce fire risks, facilitate future access or to allow future construction phases to be implemented.

? At follow this link of the construction and installation phase, both architecture team and client could make direct comparisons between the original drawings and the As Fitted Drawings. If the circumstances on the webpage want it, any changes will certainly be implemented in the BIM model throughout the construction process meaning that the As Fitted Drawings have become likely to match very closely.

Finally, significant cost benefits can be achieved by the end of the project once the facility management departments get a comprehensive and exhaustive group of drawings and instructions. In effect using BIM Modeling, the exploitation and maintenance costs throughout the lifetime of the project are reduced, which is possibly the goal of any project.