Dual Fuel Range Cooker With 13amp Plug

Are you a home chef who enjoys the fast heat control of gas cooktops but wants an electric oven for baking? Discover a dual fuel range cooker that has the best of both worlds.

Gas cooktops are favored by many home chefs with experience in the kitchen because of their superior temperature control. They also permit the use of advanced cooking techniques such as charring. These powerful stoves can be costly particularly if they need an extra gas connection and an electrician for installation.

What is a 13amp plug?

If you have a dual-fuel range cooker (also known as a gas cooker and electric oven), you will need a 13 amp plug. The plug will also have to be hard-wired into the cooker circuit ring by a qualified electrician.

This assures that the current that flows through the plug is secure and not too high which could create an electrical fire risk. The current is controlled by a fuse in the plug. The fuse goes out when the current passes through it beyond its capacity. This protects the appliance from over-charge of electricity.

The fuse is rated at 13 amps as indicated on the top of the plug. this is the maximum amount of current that the plug can carry without causing damage to the appliance or overheating the socket. It is important to ensure that when replacing fuses, you always use the same rated amps as the original. If you replace the fuse with one of an alternative rating, you run the risk of overheating the socket, and potentially placing yourself and others at danger.

Ceramic 13 amp fuses are extremely robust and are able to withstand extreme temperatures generated by the range cooker. The ceramic element is also fire-proof, making it a more suitable option than other kinds of fuse.

There are several ways to install a 13 amp plug. It could be wired to an existing live socket, and the flex is then connected to it by a screw or plastic jaw type cord clamp. The clamp on the cord should be tightened after the plug has been firmly pushed into place.

Some plugs may have a diagram of wiring on cardboard over the pins and these should be removed before connecting the wires. It is vital that the wires be cut to the proper length since cutting them too long could cause them to be crushed when the plug cover is replaced. The earth wire should be the longest wire to ensure it is connected prior to the line and neutral pins.

How do I install a 13amp plug?

The vast majority of dual cookers that use fuel in the UK are wired with a 13 amp plug. This is important because ovens can draw substantial current, while standard plug sockets only have a 10-amp rating.

In general new appliances must have a plug installed at the point-of-sale. This is in order to be in compliance with the Plugs and Sockets etc. (Safety Regulations) 1994. However, older appliances might not have a plug and this is the reason why the problem occurs.

The first step to take when connecting a cooker with an existing plug socket is to make sure that the fuse rating of the fuse box is similar to that of the plug. This is very important as an incorrectly sized fuse could pose a risk.

It is also recommended to ensure that the fuse is seated within the cartridge and that there isn't any excessive movement within it. The next step is to prepare the flex that will be used. Remove the sheathing to expose the three insulated conductors. Use a utility blade to cut the sheathing beyond the cord grip at the point of entry into the plug. This won't penetrate the insulated conductors. The nick should be large enough to allow the cable and sheathing to separate as the sheathing is pulled back. Cut off the excess sheathing, leaving a little more than 40mm over the flex.

The flex is placed over the plug with the earth terminal on top and the neutral and live terminals at the bottom. Utilizing the colored conductors to guide you, the sheathing is then removed from each pin and the internal cable is then plugged into the appropriate terminal using the cord grip. If the plug is fitted with an screw-type clamp for cords loosen it and pull back the insulation to expose the copper conductors. Connect each wire insulated to the correct terminal using the plug's channel. Start with the earth conductor first, then the neutral and finally, the live.

What is the maximum draw of a 13 amp plug?

The maximum current draw for a 13amp plug at 300 volts is 3kw. This is a lot of power, but the standard fuse that is fitted in the UK plugtop will not fail until the cable has reached to a dangerous level. A defective plug or socket can cause fire, so it's important to be vigilant about how much you are using, especially in the kitchen.

The fuse inside the plugtops are made of ceramic, about 25mm in length and rated for 240V mains. The fuses are marked with the BS Kitemark or similar mark on their side, and they'll also contain sand. There are glass or plastic alternatives, but they shouldn't be used with a live plug, or else you could blow up the fuse and possibly get electrocuted!

In the UK, most dual fuel range cookers are wired. They are not able to plug directly into a wall outlet. They are usually connected to a separate cooker ring circuit, which is only suitable for appliances that consume up to 20 amps.

Check the ring circuit at your home with the fuse box, or call a local electrician. They should be able to tell you if the sockets within your home are on the same ring or separate and whether there is a dedicated circuit for your oven.

The size of your kitchen is one of the main factors when you are looking to buy a dual-fuel range cooker. Luckily, we have a wide selection of cookers to suit any space, from compact 50-60 cm dual fuel models as well as huge 90cm + double oven models from the top brands such as Rangemaster and StovesAreUs.

We also have a wide selection of multi-function gas and electric cookers. These multifunction cookers allow you to cook a variety of meals, such as pasta, casseroles, and curries.

Explore our full range of Cookers in Currys online or visit us in-store to browse. We offer free home delivery and installation on selected range cookers and we also offer flexible payment options. If you have any questions, our team are on hand to help send us an email or give us a phone call. Credit is subjected to status, and terms & condition apply.

What is the maximum draw of a switch for a cooker?

There is lots of confusion regarding what the maximum current draw of a cooker switch is. The reality is that the majority of cookers aren't made to plug into the standard socket, but instead are hard wired and fed into an oven ring circuit. This is because they will often draw more than 20 amps of power each time the gas and electric ovens are in use.

So, you won't find a dual fuel range cooker that can be connected to a standard socket, as it could pose a significant fire risk and be in violation of electrical regulations. A professional electrician should always install new electrics in the kitchen to a cooker. They should also ensure that the total load of the oven and hob does not exceed the circuit's power supply capacity.

The advantages of a dual-fuel range cooker are the responsive heating of a gas cooktop with the precision of an electric oven. This is why they are popular among cooks and chefs alike. If you're looking to test different cooking techniques, such as searing and charcoaling, a dual fuel range cooker is the best option.

When purchasing a new range cooker, you'll have to consider several factors like size, function and price. It is also necessary to have a gas connection in your home to connect the appliance. If you're not sure, it's best to have a Gas Safe engineer inspect your property prior to installation.

Currys' dual fuel range cookers come in a variety of models to suit all budgets. From budget-friendly models from Indesit and Zanussi to our own Essentials collection. If you are looking for something more advanced We have a range of top JennAir models, that come with a number innovative features.


It is crucial to read the instruction manual for the owner before purchasing a dual-fuel range cooker. This will provide specific information regarding the gas and electrical requirements. You will need a gas connection in your home. A plumber could be required to set it up for you. Depending on your home, you will also need to make sure that you have a dedicated cooker ring circuit in place and signed off by a licensed electrician.