Dual Fuel Range Cooker With 13amp Plug

Are you a home cook who loves the responsiveness of gas cooktops, but requires an oven to bake in? Find a dual-fuel range cooker that offers the best of both worlds.

Gas cooktops are preferred by many home chefs who have years of experience in the kitchen because of their superior temperature control. They also permit the use of advanced cooking techniques, such as grilling. These powerful stoves are expensive, especially if they require an additional gas connection and an electrician to install them.

What is a 13amp outlet?

If you own a dual-fuel range cooker (also known as a gas and an electric oven) you'll require a 13 amp plug. The plug should also be hard-wired by a certified electrician to the cooker ring.


This ensures that the current flowing through the plug doesn't exceed the limit of safety that could result in an electrical fire. The current is controlled by a fuse in the plug. The fuse goes out when the current passes through it over its capacity, which protects the appliance from an overcharge of electricity.

The fuse is classified at 13 amps, as shown on the top of the plug. it indicates the maximum current that the plug can carry without causing damage to the appliance or overheating the socket. When replacing dual fuel range cookers ireland , it's important to select the same amperage rating as the original. If you replace the fuse using one with the different ratings, you run the risk of overheating the socket and placing yourself and others at high risk.

Ceramic 13 amp fuse are extremely robust and can withstand the high temperatures generated by the range cooker. Ceramic elements are also resistant to fire and therefore a better choice than other types.

There are a few different ways that a 13 amp plug can be connected. The plug can be connected to a live socket by using a screw or plastic jaw cord clamp. The clamp must be tightened after the plug has been firmly pushed into place.

Before connecting the wires you may have to remove the wiring diagram printed on cardboard that is placed over the pins of some plugs. It is vital that the wires are cut to the right length, as leaving them too long can cause them to be crushed when the plug cover is replaced. The earth wire should be the longest in order to connect it prior to the neutral and line pins.

How do I connect a 13amp plug?

The vast majority of dual fuel range cookers sold in UK are powered by an amp rating of 13 amps. This is vital because ovens draw a significant current, and standard plug sockets only have a 10 amp rating.

Generally speaking new appliances should be equipped with plugs at the time of sale. This is all part of complying with the Plugs and Sockets etc (Safety) Regulations 1994. Older appliances might not have a plug connected and this is the problem.

When connecting the cooker to an existing plug socket, the first thing to do is to make sure that the rating of the fuse inside the fuse box is the same as that of the plug's. This is crucial because a fuse that is not properly sized could pose a risk.

It is also recommended that the fuse has been fully seated in the cartridge, and there isn't any excessive movement. The next step is to prepare the flex to be used. First remove the sheathing from the flex, exposing the three insulated conductors within. Utilize a utility knife to cut the sheathing beyond the grip of the cord at the point of entry into the plug. This will not penetrate the insulated conductors. This nick should be wide enough to allow the sheathing to split and enlarge the nick as it is pulled back revealing the cable underneath. Finally cut off the excess sheathing and leave about 40mm extending beyond the flexing end.

The flex is then positioned over the plug, with the earth terminal at the top and neutral and live terminals at the bottom. The sheathing of each pin is removed using colored conductors as a reference. The internal cable is then inserted to the terminal with the help of the cord grip. If the plug is fitted with an screw-type clamp for cords, loosen this and then pull back the insulation to reveal the copper conductors. Connect each conductor that is insulated to the proper terminal (starting with the earth first, then neutral and finally the live) by using the channel they run through the plug.

What is the maximum draw of a 13amp plug?

The maximum current draw for a 13amp plug at 3kw at 230 volts is. This is a lot of power, however the standard fuse fitted in a UK plugtop will not fail until the cable is heated to a risky temperature. A defective plug or socket could result in a fire, therefore it is important to keep an eye on how much power you use, especially in the kitchen.

The ceramic fuses used in plugtops measure around 25mm and are rated for mains voltages of 240V. They will be marked with a BS kitemark or similar mark on the side, and they contain sand. Alternatives to glass or plastic are available, but should not be used in combination with a live plug.

In the UK the majority of dual fuel range cookers are wired. They are not able to plug directly into an outlet on the wall. They are typically connected through a separate cooker circuit which is suitable only for appliances that can handle up to 20 amps.

Check the ring circuit of your home using the fuse box, or contact a local electrician. They will be able to inform you if the sockets in your home are connected to the same ring or are separate and whether there is a dedicated circuit for your oven.

The size of your kitchen is one of the main factors when you are looking to purchase a dual fuel range cooker. We have a wide selection of cookers to suit any space, including compact 50 - 60cm dual fuel models and vast 90cm+ double oven options from leading brands like Rangemaster and StovesAreUs.

We also have a wide variety of multifunction gas and electric cookers. These multifunction cookers can be used to cook a variety meals such as pasta, casseroles and curries!

Explore our full range of Cookers in Currys on our website or visit us in store to take a look. We provide free home delivery and installation on selected range cookers, as well as flexible payment options. If you have any questions, our team are available to assist - just drop us an email or give us a phone call. Credit is subject to status, and terms and conditions apply.

What is the maximum current draw of a cooker switch?

There is plenty of confusion over what the maximum current draw of a cooker switch is. The majority of cookers are hard-wired and connected to a dedicated oven-ring circuit and not a standard socket. This is due to the fact that they usually consume more than 20 amps when both the gas hob and electric oven are being used.

Therefore, you cannot find a dual fuel range cooker that can be fitted to a standard socket as this would present a very significant fire risk and be in violation of electrical regulations. A licensed electrician should install new electrical wiring in the kitchen to the cooker. They should also ensure that the total load of the oven and hob do not exceed the circuit's power supply capacity.

Dual fuel range cookers combine the flexibility of a gas stove and the precision and accuracy of an electric oven. This is the reason they are highly sought-after by chefs and cooks at home alike. If you're looking to test different cooking techniques such as searing and charring, a dual fuel range cooker is the perfect option.

When buying a new cooktop, you must take into consideration a variety of factors such as size, function and price. In addition, you will also need to make sure that your home is equipped with the right gas hook-up for the appliance. If you're unsure, it's best to get a Gas Safe engineer inspect your home prior to installing.

The Currys range of dual fuel range cookers has options that can be adapted to a range of budgets, ranging from low-cost models from Indesit and Zanussi to our exclusive Essentials collection. If you are looking for something more advanced, we stock a variety of top JennAir models, that come with several new features.

It is important to read the instruction manual for the owner before purchasing a dual fuel range cooker. This will provide specific information about the electrical and gas requirements. You will require gas connections in your home. A plumber might be required to set it up for you. You might also require a dedicated cooker-ring circuit, installed by an experienced electrical engineer.