Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser

The innovative Ghost immobiliser guards your car from key-long and relay theft. With a unique PIN sequence, unless you have the correct code, your vehicle won't start!

It also has Transport Mode that allows you to disable the device temporarily, ideal for vehicle transportation and servicing. It then reactivates by entering a PIN again.

No Key Fobs or Led Indications


The Ghost 2 immobiliser offers a strong defense against modern car theft techniques. Its invisibility and engine start blockage reduces the possibility of theft, providing peace of mind as well as saving money on insurance.

It cannot be detected by scanners, and it cannot be hacked using standard methods like key cloning or signal jamming. The device uses existing buttons on your vehicle such as those on the steering wheel, door panels, and the center console to generate a unique, changeable PIN code sequence that can be as long as 20 presses. Only the vehicle owner is capable of starting the engine when the right sequence or beacon or mobile application is employed. This adds an additional layer of security against thieves.

You can also turn on a convenient service mode for situations like valet parking or servicing that require you to temporarily disable the system. This can be accomplished quickly and easily via a mobile app, meaning your vehicle remains safe while being repaired. It is simple to switch to secure mode when the job is complete, ensuring your vehicle is protected throughout the day.

The Ghost 2 is far more practical than other systems that require fobs. The app also functions as a spare key in emergency situations, allowing you to drive with the security off without having to enter your PIN code.

No Radio Frequency Signals

The Ghost 2 immobiliser is not as traditional security systems which require an additional remote control. It is operated using the existing buttons on the console or steering wheel. It is also unnoticeable by thieves using RF scanning or code grabbing technology. This means that your car won't even start for it even if they get your keys.

The device locks the engine by using a unique sequence of buttons. This unique PIN code can be entered via the app or via the existing buttons on the steering wheel and on the centre console. You can also lock the gearbox so that your vehicle cannot be driven unless you have your key or pin code. The device can be set to transport mode, which allows you to drive your car without entering the PIN code and providing your vehicle with extra protection when it's used for service or valet parking.

The Ghost 2 immobiliser was designed to be as discreet as possible as a theft deterrent. This makes it a great option for those who spent many dollars on customizing their cars, or have expensive or rare vehicles. Many have reported that this device is a great way to prevent their cars from being stolen. Many have shared stories of attempted thefts of cars which were thwarted by the device. The Ghost 2 is also very versatile. Customers report that it can be used with their regular keys and with the emergency button on their car, giving them peace of mind when they're away from their car.

No Radio Frequency Scanners

Ghost immobilisers protect your vehicle against key theft and cloning. The system makes use of the buttons on your dashboard and steering wheel to create a unique button sequence that you can only recognize. Without this sequence, your vehicle will not start. This unique combination of a disarming sequence as well as the absence of radio frequency signals makes the device extremely difficult to penetrate or bypass.

The Ghost CAN Immobiliser is a better alternative to devices approved by Thatcham that rely on radio frequencies scanning. It operates completely silently, without external signals and doesn't rely on any external signals. It's a far more secure alternative and offers insurance approved status when installed by an TASSA approved installer (we're one of them! ).

It is highly recommended that you hire a professional installer install the Ghost immobiliser. This is due to the way it integrates with the vehicle. This ensures that it's integrated seamlessly with your vehicle systems, which results in optimal performance and a substantially lower chance of failure.

Additionally, professional installation often includes warranties and support which further enhances the value of your investment. This is a significant deterrent for would-be thieves, who are less likely to try any attempt to bypass the device because of its security features and professional installation.

In addition to being an effective deterrent to thieves, as well as a great deterrent to thieves, the Ghost is designed to be user-friendly too. It can be configured to automatically re-arm after a certain period of time, meaning you don't need to remember your PIN code every time you park your car. It also allows the option of Service/Valet Mode in the event that you need to hand your vehicle to a service or valet parking. This can be enabled or disabled depending on your preference. a simple indication sequence.

No Wire Cutting

The Ghost 2 does not require cutting any wires in your car in order to install it, ensuring a the non-invasive integration of your vehicle's original systems. It connects to your vehicle's CAN data network and is programmed with a unique PIN that prevents anyone else from starting your engine if they don't have a personal PIN sequence or app authorization.

It is also unnoticeable by the specialised scanners that thieves employ and is silent as it doesn't send out radio signals like other immobilisers. It is weatherproof, sealed and small enough to be hidden in the vehicle.

The Ghost II also has the ability to be switched into 'transport mode which enables it to be used for short periods of time without the need for a separate PIN. This is great in situations such as lending the vehicle to a friend or family member, or in a situation of emergency. You can start your vehicle quickly and safely.

It is important to work in a well-lit area when installing the Ghost II. You should wear safety equipment when working with electrical components and tools. A basic set of tools can help you to make precise connections. A multimeter will allow you to determine electrical values and make sure that your wiring is safe. Cable tie and insulation tape can be used to cover any wires that have been cut or exposed or to join them during installation.

It is also essential to disconnect the battery prior to attempting any wiring work on your vehicle. This will prevent any airbag deployments and electrical shocks in the event that the Ghost II is connected to the vehicle's system when the battery is disconnected.

Easy to Install

The Ghost immobiliser, an exclusive device that is the next generation, works by directly connecting to your vehicle's CAN Data Network. It uses a personalised pin code to stop it from getting started. This makes it more difficult to break than standard key fobs or alarm systems and offers greater protection against key cloning hacking, as well as relay attacks.

The unit can be hidden within your vehicle and utilises the buttons already on your dashboard and steering wheel to generate an sequence that only you are aware of. This prevents thieves using a fake car key to open it and also prevents them using an instrument for diagnosing that thrives on hacking OBD.

Installation is easy and does not require cutting wires. The unit is connected to the vehicle's CAN bus through a continuous 12V supply and a grounding connector. Hand tools of a basic nature are sufficient for the installation process and a multimeter will assist in locating the correct wires. Insulation tape or heat shrink tubing is suggested to protect the connections, and cable ties are a good option to keep the wiring neat and tidy.

Once it is installed, the device goes into a learning mode which captures your specific buttons or sequences to create your own unique pin code. This information is stored in the CAN network which makes it nearly impossible for anyone to duplicate your sequence and then start your vehicle.

If you ever forget your PIN Code, sell your car or an option becomes unavailable, there is an emergency override feature known as Transport Mode. This will disable the Ghost System completely, but it will automatically reactivate when you exceed 31mph for more than 15 minutes or enter your PIN Code. The Keylab is perfect for those who rent their vehicles regularly through services such as Turo or ZipCar.