How to Install a Ghost Immobiliser

Ghost immobilisers are hidden security system that shields your vehicle from key cloning and hacking. It works by stopping the engine from starting until a PIN number is entered. It can be as long as 20 characters.

This additional layer of security is not visible to thieves who may not expect it. Some systems have an app that allows the owner to disarm their immobiliser in the event of forgetting their PIN code or to use the service/valet mode.

Connecting the vehicle's CAN Bus

The Ghost 2 Immobiliser, a cutting edge security system, is able to be integrated directly into the ECU of your vehicle. It offers a discrete protection against thieves. It is highly effective and user-friendly and can be a valuable component of your vehicle's security arsenal. Like all anti-theft devices, it's not foolproof and requires regular maintenance to function properly. This guide will help you make the most of your Ghost 2 immobiliser.

CAN (Controller Area Network) is a robust serial network that allows microcontrollers to communicate with one another across short distances without the need for a central control unit. It is designed to multiply electrical wiring in vehicles, thereby saving on copper. It has numerous advantages, such as low cost and simple use.

The CAN protocol is utilized in a majority of modern automobiles to connect with the engine management system, transmission controller, steering control module and air conditioning controls and many more. It also carries sensor data including speed sensors and inputs to control various features of the car. The CAN bus is used to monitor these various components, and can prevent the car from starting if they are in a dangerous state.

It's crucial to understand how the CAN bus functions and how it's secured. It is possible to add additional features to a vehicle by using CAN bus, however it's important to secure it from threats from hackers and other types. The best way to accomplish this is to install firewalls and monitoring your CAN bus through software.

Ghost2's secluded control unit is hidden away in the wiring harness or dashboard, removing the possibility of a criminal physically tampering with it. It's also impossible to reset the PIN code or emergency code without access to the vehicle.

You can activate Transport Mode if you need to give your vehicle away for service, valet parking or any other reason. This feature disables the Ghost immobiliser's ignition and keyfob functions, and will only be activated when the vehicle reaches 31 mph for 15 minutes.

How do you create a PIN code

The Ghost immobiliser is a robust security system that guards your vehicle from thieves. The latest technology utilizes an PIN code to disable the engine and block it from starting if you do not have the proper code or an authorized fob or mobile device. The system's subtle design ensures the system is unnoticeable and offers unparalleled protection against theft. The system is TASSA-verified and can save you significant amounts on your car insurance.

During the installation when you install the Ghost system enters the learning mode to record the sequence of buttons pressed to generate your unique pin code. After the pin code is created, the installer will then guide you through the steps to activate the system. Once activated the Ghost system will disable the vehicle's start motor until you enter a valid PIN or switch the vehicle into transport mode. This makes it extremely difficult for thieves to duplicate or hack your vehicle's starter system.

It is easy to install a Ghost immobiliser, however, you must follow the detailed instructions in the user's manual to ensure the proper operation. Basic hand tools can assist in making precise connections, and a multimeter can aid in checking electrical values. Insulation tape and heat shrink tubing may protect exposed wiring, while cable tie is essential to keep everything neat and secure. Also, be sure to test the system regularly to identify any potential issues and mistakes.

Once the installation is complete it is crucial to perform a final check of the system prior to turning on the ignition in your vehicle. The Ghost immobiliser will re-arm itself after a period of 3-30 seconds, based on the vehicle model. The system is also equipped with a Service/Valet mode that lets you temporarily disable the system for servicing or valet parking.

Ideally, the immobiliser should be hidden beneath the dashboard or on the steering wheel. It is recommended to use a small piece of duct tape or paint to mark the CAN H and CAN L wires, so that you can easily find them during testing. In addition the CAN H and L wires must be connected to a source of power that is able to provide continuous 12V. It is also important to check the connections following testing, since misidentifying these wires can cause the system to malfunction.

Activating the system

A ghost immobiliser stops your car from starting until you press a number of buttons inside the vehicle, typically on the steering wheel or the door panel, or the central console. The sequence can be altered by the user in case it is needed. Once the system is activated, it is in no way able to be removed by thieves and is a great option for anyone looking to secure their vehicle from theft.

The system is designed to be undetectable. This means it isn't detected by modern diagnostic tools or code-grabbing technology. It does not emit radio frequencies either which makes it more difficult for thieves to find.

If the device is detected, it will prevent the engine from starting and will sound a loud alarm to deter thieves. The device can be used to monitor the location of a vehicle, which will assist in the recovery of the vehicle in the event that it has been taken.

If you are interested in a ghost immobiliser, contact the experts at Car Specalist Customs to get a quote and discuss your options. We are able to install ghost immobilisers for your vehicle. ghost ii immobiliser will make sure that it is concealed in a place that is difficult to access. We can also provide other security measures like an ignition lock for your wheel and a kill switch to help protect your vehicle from thieves.

Disarming the system

It is essential to know how to deactivate a Ghost immobiliser if it is installed in your vehicle. It can be used in the event you forget your keys or the battery in your car dies. The system utilizes a unique PIN code, which only you are aware of. It cannot start the car without this code. The simplest method to enter the code is to press a combination of buttons on your dashboard or steering wheel. This is much easier than using a key fob, and stops others from copying your remote.


Unlike some aftermarket immobilisers that require cutting wires to install, Ghost2 is non-invasive and integrates with your vehicle's CAN bus network to operate. Its most distinctive feature is that it bypasses the engine without affecting functions of the vehicle. This makes it difficult for thieves to use signal boosts or duplicate keys to car keys. It does not emit radio frequencies, which means thieves are unable to detect it.

The Ghost system comes with the option of a Transport Mode which allows you to temporarily disable security in situations such as transportation or service. This feature is ideal for when you're loaning your vehicle out to someone else, without sharing your PIN number, or if your vehicle needs to be secured while you drive it. Press the service button five times over two seconds to enable Transport Mode. The Ghost system will confirm activation using 5 signal indicators.

Keep the emergency code inside your vehicle in a safe place. In the event that you discover yourself locked out of your vehicle, you can contact the technician or company that installed the system and they will provide you with the code. If you are unable reach them, then you can seek out an authorized dealer. However, this might involve verification procedures, and you may be charged additional charges.

This system is not just convenient, but it can also safeguard your vehicle from theft and reduce cost of insurance. Many insurance companies offer reduced monthly rates or even financial incentives to install this anti-theft technology.